notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)

Two new features

Two two features were added on 2020-05-30:
  1. Repology links - each port now has a link to repology.org. See issue 148 for details.
  2. Ports I maintain report - port maintainers can now subscribe to a daily report of commits to the ports they maintain. See Watch ports I maintain at Report Subscriptions. Details at issue 138
non port: cad/salome-multipr/Makefile
SVNWeb

Number of commits found XX: 10

Mon, 6 Jan 2014
[ 12:21 rene ] Original commit   Revision:338868
338868 cad/salome-gui/Makefile
338868 cad/salome-jobmanager/Makefile
338868 cad/salome-light/Makefile
338868 cad/salome-med/Makefile
338868 cad/salome-multipr/Makefile
338868 cad/salome-netgenplugin/Makefile
338868 cad/salome-randomizer/Makefile
338868 cad/salome-sierpinsky/Makefile
338868 cad/salome-smesh/Makefile
338868 cad/salome-visu/Makefile

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Deprecate and schedule for removal on 2014-01-22, depends on expired
cad/salome-kernel.

PR:		ports/185111
Submitted by:	rene
Approved by:	maintainer timeout (devel@stasyan.com , 14 days)
Sat, 26 Oct 2013
[ 00:52 gerald ] Original commit   Revision:331644
331644 archivers/hs-tar/Makefile
331644 archivers/hs-zip-archive/Makefile
331644 archivers/hs-zlib-bindings/Makefile
331644 archivers/hs-zlib-conduit/Makefile
331644 archivers/hs-zlib-enum/Makefile
331644 archivers/hs-zlib/Makefile
331644 astro/R-cran-maptools/Makefile
331644 astro/astrometry/Makefile
331644 astro/nightfall/Makefile
331644 astro/py-RO/Makefile

(Only the first 10 of 1147 ports in this commit are shown above. View all ports for this commit)
Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 20 Sep 2013
[ 15:58 bapt ] Original commit   Revision:327711
327711 cad/admesh/Makefile
327711 cad/adms/Makefile
327711 cad/alliance/Makefile
327711 cad/astk-client/Makefile
327711 cad/astk-serveur/Makefile
327711 cad/atlc/Makefile
327711 cad/basicdsp/Makefile
327711 cad/brlcad/Makefile
327711 cad/calculix/Makefile
327711 cad/cascade/Makefile

(Only the first 10 of 103 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)
Sun, 3 Feb 2013
[ 18:16 makc ] Original commit   Revision:311476
311476 audio/picard/Makefile
311476 audio/puddletag/Makefile
311476 cad/salome-geom/Makefile
311476 cad/salome-gui/Makefile
311476 cad/salome-jobmanager/Makefile
311476 cad/salome-light/Makefile
311476 cad/salome-med/Makefile
311476 cad/salome-multipr/Makefile
311476 cad/salome-netgenplugin/Makefile
311476 cad/salome-randomizer/Makefile

(Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip
Fri, 1 Jun 2012
[ 05:26 dinoex ] Original commit 
1.59 Mk/bsd.gecko.mk
1.1246 UPDATING
1.18 accessibility/accerciser/Makefile
1.12 accessibility/at-poke/Makefile
1.77 accessibility/at-spi/Makefile
1.5 accessibility/at-spi2-atk/Makefile
1.54 accessibility/dasher/Makefile
1.60 accessibility/gnome-mag/Makefile
1.45 accessibility/gnopernicus/Makefile
1.51 accessibility/gok/Makefile

(Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Fri, 25 May 2012
[ 01:50 makc ] Original commit 
1.34 audio/picard/Makefile
1.4 audio/puddletag/Makefile
1.5 cad/salome-geom/Makefile
1.7 cad/salome-gui/Makefile
1.3 cad/salome-jobmanager/Makefile
1.5 cad/salome-light/Makefile
1.6 cad/salome-med/Makefile
1.5 cad/salome-multipr/Makefile
1.3 cad/salome-netgenplugin/Makefile
1.4 cad/salome-randomizer/Makefile

(Only the first 10 of 57 ports in this commit are shown above. View all ports for this commit)
Chase PyQT update
Fri, 15 Jul 2011
[ 07:00 sunpoet ] Original commit 
1.4 cad/salome-geom/Makefile
1.4 cad/salome-gui/Makefile
1.2 cad/salome-jobmanager/Makefile
1.6 cad/salome-kernel/Makefile
1.4 cad/salome-light/Makefile
1.5 cad/salome-med/Makefile
1.4 cad/salome-multipr/Makefile
1.2 cad/salome-netgenplugin/Makefile
1.4 cad/salome-sierpinsky/Makefile
1.4 cad/salome-smesh/Makefile

(Only the first 10 of 26 ports in this commit are shown above. View all ports for this commit)
- Bump PORTREVISION for science/hdf5-18 shlib change
Tue, 4 Jan 2011
[ 21:13 thierry ] Original commit 
1.3 cad/salome-geom/Makefile
1.1 cad/salome-geom/files/patch-admlocal_unix_config_files_Makefile.am
1.2 cad/salome-geom/files/patch-admlocal_unix_configfiles_Makefile.am
1.2 cad/salome-geom/files/patch-build_configure
1.2 cad/salome-geom/files/patch-check_qt.m4
1.2 cad/salome-geom/files/patch-check_vtk.m4
1.3 cad/salome-geom/pkg-plist
1.3 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_DDS_DDS_DicGroup.cxx
1.1 cad/salome-gui/files/patch-GUI_DDS_DDS_DicItem.cxx

(Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
Update cad/salome* to 5.1.4.

Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
         successful _run_.

PR:             ports/152396
Submitted by:   maintainer (Stas Timokhin)
Sat, 15 May 2010
[ 15:58 thierry ] Original commit 
1.2 cad/salome-geom/Makefile
1.1 cad/salome-geom/files/patch-Makefile.am
1.2 cad/salome-geom/pkg-plist
1.2 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_Makefile.am
1.2 cad/salome-gui/pkg-plist
1.3 cad/salome-kernel/Makefile
1.2 cad/salome-kernel/files/patch-KERNEL-Makefile.am
1.2 cad/salome-kernel/files/patch-KERNEL-SALOME_Comm_i.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-bin_Makefile.am

(Only the first 10 of 43 ports in this commit are shown above. View all ports for this commit)
- Unbreak (incorrect use of bsd.autotools.mk)

- Don't install useless documentation.

PR:             ports/143878
Submitted by:   Stas Timokhin <devel (at) stasyan.com> (maintainer)
Fri, 12 Feb 2010
[ 22:15 pgollucci ] Original commit 
1.118 cad/Makefile
1.1 cad/salome-multipr/Makefile
1.1 cad/salome-multipr/files/patch-bin_Makefile.am
1.1 cad/salome-multipr/files/patch-configure.ac
1.1 cad/salome-multipr/pkg-descr
1.1 cad/salome-multipr/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains MULTIPR module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>

Number of commits found XX: 10

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
chromiumJun 05
gitlab-ceJun 04
gnutlsJun 04
py-django22Jun 04
py-django30Jun 04
libnghttp2Jun 03
nghttp2Jun 03
rubygem-websocket-extensionsJun 03
giteaMay 31
powerdns-recursor*May 29
gitlab-ceMay 28
rubygem-kaminari-coreMay 28
sane-backendsMay 28
sympaMay 26
chromiumMay 24

18 vulnerabilities affecting 99 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities

Last updated:
2020-06-05 11:54:25


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 39482
Broken 93
Deprecated 619
Ignore 335
Forbidden 5
Restricted 147
No CDROM 76
Vulnerable 23
Expired 12
Set to expire 569
Interactive 0
new 24 hours 1
new 48 hours6
new 7 days30
new fortnight67
new month172

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2020 Dan Langille. All rights reserved.