| non port: chinese/scim-fcitx/Makefile |
|
SVNWeb
|
Number of commits found: 30 |
|
Sat, 5 Aug 2023
|
[ 18:55 Muhammad Moinur Rahman (bofh)  ]    c92e9cc
chinese/scim-fcitx: Fix build with llvm16
- Pet portclippy
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 25fe59a (Only the first 10 of 124 ports in this commit are shown above. )
chinese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <intron@intron.ac>
* Bo-Yi Wu <appleboy.tw@gmail.com>
* Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
* Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
* David O'Brien (obrien@FreeBSD.org)
* David O'Brien (obrien@cs.ucdavis.edu)
* Eric L. Camachat <eric@camachat.org>
* Foxfair Hu <foxfair@FreeBSD.org>
* G. Adam Stanislav <adam@whizkidtech.net>
* Gasol Wu <gasol.wu@gmail.com>
* Gea-Suan Lin <gslin@gslin.org> (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 17 Jan 2022
|
[ 13:20 Tobias Kortkamp (tobik) ] 07389cd (Only the first 10 of 14 ports in this commit are shown above. )
*: Sweep up new CONFLICTS_INSTALL mess
- Fix typos
- Fix overwritten master/slave variables
I'm assuming the entries are correct otherwise.
Reported by: portscan
|
|
Mon, 10 Jan 2022
|
[ 15:15 Stefan Eßer (se) ] bcaf25a (Only the first 10 of 491 ports in this commit are shown above. )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 30 Apr 2019
|
[ 19:23 pkubaj ]
chinese/scim-fcitx: fix build with GCC-based architectures
Apart from using new GCC on GCC architectures, this port also needs to including
sys/types.h and cstring in some cpp files:
/usr/local/lib/libscim-1.0.so: undefined reference to
`std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>
>::_M_assign(std::__cxx11::basic_string<char, std::char_traits<char>,
std::allocator<char> > const&)@GLIBCXX_3.4.21'
PR: 237148
Approved by: meta (maintainer timeout), mat (mentor)
Differential Revision: https://reviews.freebsd.org/D20106
|
|
Mon, 9 Jul 2018
|
[ 08:40 mat ] (Only the first 10 of 429 ports in this commit are shown above. )
Remove all := from BUILD_DEPENDS, here are never needed.
While there, cleanup, and sort depends.
When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS. In order of preference, they are:
1) use RUN_DEPENDS to set BUILD_DEPENDS:
BUILD_DEPENDS= ${RUN_DEPENDS}
RUN_DEPENDS= foo:bar/baz
2) create another variable and use it:
MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS= ${MY_DEPENDS}
RUN_DEPENDS= ${MY_DEPENDS}
3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:
BUILD_DEPENDS= foo:bar/baz
RUN_DEPENDS:= ${BUILD_DEPENDS}
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 28 May 2015
|
[ 11:40 amdmi3 ]
- Strip library
- Add LICENSE
|
|
Sat, 18 Apr 2015
|
[ 09:47 tijl ] (Only the first 10 of 41 ports in this commit are shown above. )
- Remove libtool hacks and patches that are now handled by USES=libtool
- Remove CONFIG_SHELL from CONFIGURE_ENV because bsd.port.mk handles that
|
|
Sun, 31 Aug 2014
|
[ 13:19 tijl ] (Only the first 10 of 22 ports in this commit are shown above. )
textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
|
Tue, 22 Jul 2014
|
[ 23:42 amdmi3 ]
- Switch to USES=libtool
- Fix build on 10.x
Approved by: portmgr blanket
|
|
Sun, 1 Jun 2014
|
[ 16:43 ohauer ] (Only the first 10 of 17 ports in this commit are shown above. )
- USE_(BZIP2|XZ) -> USES=tar:(bzip2|xz)
|
|
Mon, 20 Jan 2014
|
[ 21:22 antoine ]
Stage support
|
|
Fri, 20 Sep 2013
|
[ 16:01 bapt ] (Only the first 10 of 138 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
chinese)
|
|
Sun, 15 Sep 2013
|
[ 12:27 antoine ] (Only the first 10 of 11 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
Approved by: portmgr (bapt)
|
|
Sun, 10 Jun 2012
|
[ 18:42 swills ] (Only the first 10 of 639 ports in this commit are shown above. )
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
about for a while.
PR: ports/168208
Approved by: portmgr (miwi)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sun, 22 Nov 2009
|
[ 19:49 pav ] (Only the first 10 of 86 ports in this commit are shown above. )
- Mark MAKE_JOBS_UNSAFE
Reported by: pointyhat
|
|
Sat, 22 Aug 2009
|
[ 00:15 amdmi3 ] (Only the first 10 of 78 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with B,C
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 6 Jun 2008
|
[ 13:14 edwin ] (Only the first 10 of 25 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sun, 2 Mar 2008
|
[ 08:25 linimon ] (Only the first 10 of 45 ports in this commit are shown above. )
Reset relaxbsd@gmail.com due to maintainer-timeouts.
Hat: portmgr
|
|
Thu, 5 Jul 2007
|
[ 07:21 beech ] (Only the first 10 of 22 ports in this commit are shown above. )
- Change maintainer address
- Cleanup master_sites
Requested by: Yinghong Liu <relaxbsd@gmail.com> (maintainer)
Approved by: sat (mentor)
|
|
Wed, 13 Jun 2007
|
[ 04:52 miwi ]
fcitx stands for Free Chinese Input Toy of X,it's a ollection of Simplified
Chinese input methods based on XIM (X Input Method), including WuBi, PinYin,
and QuWei.
scim-fcitx is an SCIM IMEngine module for fcitx.
WWW: http://www.fcitx.org
PR: ports/112523
Submitted by: Yinghong.Liu <liu_yinghong at yahoo.com.cn>
|
Number of commits found: 30 |
As an Amazon Associate I earn from qualifying purchases.