20:02 Muhammad Moinur Rahman (bofh) 

chinese/scim-pinyin: Fix build with llvm16

- Pet portclippy
- Utilize USES=localbase

Sponsored by:	The FreeBSD Foundation

    4c4d74fc

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

chinese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <intron@intron.ac>
  *  Bo-Yi Wu <appleboy.tw@gmail.com>
  *  Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
  *  Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eric L. Camachat <eric@camachat.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Gasol Wu <gasol.wu@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jing-Tang Keith Jang <keith@FreeBSD.org>
  *  Joe Horn <joehorn@gmail.com>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Michael C . Wu <keichii@iteration.net>
  *  Michael C. Wu
  *  Ming-I Hseh <PA@FreeBSD.Ntu.edu.TW>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Shell Hung <shell@shellhung.org>
  *  Shen Chuan-Hsing
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Shuo Su <yssu@CCCA.NCTU.edu.tw>
  *  Yin-Jieh Chen <yinjieh@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Zhang Shu
  *  Zhihao Yuan <lichray@gmail.com>
  *  blubee <hello@blubee.me>
  *  buganini@gmail.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clsung
  *  clsung@dragon2.net
  *  gugod@gugod.org
  *  hrs
  *  ijliao
  *  vanilla@

With hat:	portmgr

    25fe59a

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

15:03 tijl 

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

 

14:34 amdmi3 

- Add LICENSE
- Strip libraries
- Use options helpers

 

10:23 bapt 

Reset maintainership

 

13:19 tijl 

textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

 

17:16 tijl 

Convert to USES=libtool.

 

07:20 vanilla 

Add stagedir support.

Approved by:	 portmgr (blanket infrastructure)

 

16:01 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
chinese)

 

13:01 bapt 

Add an explicit dependency on pkgconf

 

08:50 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

04:18 pclin 

- Update to 0.5.92
- Add OPTIONS for NLS
- Remove SKIM support since textproc/skim has been marked as deprecated
- Remove unused CONFIGURE_ENV in Makefile and overdated patch files
- Take maintainership

PR:		ports/174862
Approved by:	swills (mentor)

 

18:42 swills 

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

05:26 dinoex 

- update png to 1.5.10

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

00:15 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with B,C

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

17:27 pav 

- Remove conditional checks relevant only on FreeBSD 5.x and older

13:14 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

06:52 ume 

Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.

07:47 linimon 

Reset gaoj@cpsc.ucalgary.ca due to maintainer-timeouts and no response to email.

Hat:            portmgr

08:54 marcus 

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

03:11 ade 

Fix up a little more post-libtool fallout

Submitted by:   various
Approved by:    portmgr (implicit)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

10:46 lawrance 

Update to 0.5.91.
Add new optional skim setup module (WITH_SKIM).

PR:             ports/93165
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

13:21 nork 

SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.

Approved by:    Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:    Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

06:20 nork 

o Update to 1.4.0.
o Chase bump libversion to slave ports .

PR:             ports/84247
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

14:57 nork 

o Update
  ports/textproc/scim 1.2.0 --> 1.2.2
  ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.

PR:             ports/80848
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)