non port: chinese/wenju/Makefile |
SVNWeb
|
Number of commits found: 50 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 25fe59a (Only the first 10 of 124 ports in this commit are shown above. )
chinese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <intron@intron.ac>
* Bo-Yi Wu <appleboy.tw@gmail.com>
* Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
* Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
* David O'Brien (obrien@FreeBSD.org)
* David O'Brien (obrien@cs.ucdavis.edu)
* Eric L. Camachat <eric@camachat.org>
* Foxfair Hu <foxfair@FreeBSD.org>
* G. Adam Stanislav <adam@whizkidtech.net>
* Gasol Wu <gasol.wu@gmail.com>
* Gea-Suan Lin <gslin@gslin.org> (Only the first 15 lines of the commit message are shown above )
|
Sun, 6 Feb 2022
|
[ 18:36 Stefan Eßer (se) ] bdd2d4a (Only the first 10 of 69 ports in this commit are shown above. )
Update CONFLICTS definitions in categories a* to c*
Update the CONFLICTS definitions of ports in the following categories:
- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters
An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.
There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.
Approved by: portmgr (implicit)
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 8 Nov 2019
|
[ 09:31 tobik ] (Only the first 10 of 39 ports in this commit are shown above. )
c*: Add missing USES={gnome,php,sdl,xorg}
|
Thu, 28 May 2015
|
[ 11:40 amdmi3 ]
- Add LICENSE
- Strip libraries
- Use options helpers
|
Tue, 1 Jul 2014
|
[ 01:21 amdmi3 ]
- Switch to USES=libtool, drop .la files
|
Fri, 27 Sep 2013
|
[ 12:33 vanilla ]
Support stage.
|
Fri, 20 Sep 2013
|
[ 16:01 bapt ] (Only the first 10 of 138 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
chinese)
|
Mon, 2 Sep 2013
|
[ 21:27 bapt ] (Only the first 10 of 28 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
Mon, 17 Jun 2013
|
[ 16:18 antoine ] (Only the first 10 of 15 ports in this commit are shown above. )
- Add gtk-query-immodules to _FORCE_POST_PATTERNS to run it post-deinstall
with pkg
- Consistently use full path when running gtk-query-immodules as the path
is embedded in output (we prefer reproducible output)
This fixes leftovers reported by poudriere
====>> Files or directories modified:
etc/gtk-2.0/gtk.immodules
PR: ports/179230
Approved by: portmgr (bapt)
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
Fri, 29 Jun 2012
|
[ 12:42 bapt ] (Only the first 10 of 25 ports in this commit are shown above. )
Convert to new option framework
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Fri, 20 May 2011
|
[ 17:34 danfe ]
Allow NLS support to be controlled via OPTIONS.
|
Wed, 18 May 2011
|
[ 09:06 danfe ]
* Update to version 1.6
* Remove two offending and incorrect patches: GNU getline() should be
replaced by standard fgets() with care, as they two return different
things (number of characters read vs. pointer to the string). These
two patches simply replaced one call with the other, leaving return
value unmodified according to what caller had expected, which leads
to all sorts of weird crashes and segfaults. Port itself checks for
getline() presence and uses bundled implementation if it's not found
* As usual, clean up Makefile and port description while I'm here
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Fri, 28 Aug 2009
|
[ 17:37 linimon ] (Only the first 10 of 221 ports in this commit are shown above. )
Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.
Hat: portmgr
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Mon, 5 Jan 2009
|
[ 17:27 pav ] (Only the first 10 of 56 ports in this commit are shown above. )
- Remove conditional checks relevant only on FreeBSD 5.x and older
|
Sun, 31 Aug 2008
|
[ 00:32 chinsan ]
- Update to 1.4
- Take maintainership
|
Fri, 6 Jun 2008
|
[ 13:14 edwin ] (Only the first 10 of 25 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Thu, 20 Mar 2008
|
[ 09:23 pav ] (Only the first 10 of 23 ports in this commit are shown above. )
- Remove USE_GETOPT_LONG which is a no-op since March 2007
|
Sat, 4 Aug 2007
|
[ 11:41 gabor ] (Only the first 10 of 291 ports in this commit are shown above. )
- Remove the DESTDIR modifications from individual ports as we have a new,
fully chrooted DESTDIR, which does not need such any more.
Sponsored by: Google Summer of Code 2007
Approved by: portmgr (pav)
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
Mon, 14 Aug 2006
|
[ 07:09 clsung ]
- Respect DESTDIR
- portlint fix
PR: ports/101909
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
Mon, 25 Jul 2005
|
[ 21:58 linimon ] (Only the first 10 of 42 ports in this commit are shown above. )
Reset bouncing maintainer address. These ports are now available for
adoption.
Note that I have left the maintainer's own ftp site as a MASTERSITE
because it still appears to be active (for now, anyways).
Hat: portmgr
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
Sun, 6 Feb 2005
|
[ 16:30 leeym ]
- add conditional support for NLS and fix PLIST problem
Noticed by: kris, sem
|
Sat, 8 Jan 2005
|
[ 15:50 sem ] (Only the first 10 of 40 ports in this commit are shown above. )
- Pass maintainership to submitter
PR: ports/75730
Submitted by: statue(at)freebsd.netlab.cse.yzu.edu.tw
|
[ 10:48 leeym ]
- fix broken PLIST
PR: 75937
Submitted by: leeym
|
Sun, 7 Nov 2004
|
[ 22:37 marcus ] (Only the first 10 of 631 ports in this commit are shown above. )
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
Wed, 25 Feb 2004
|
[ 07:18 vanilla ]
- update to 1.3
- unbreak
PR: ports/63332
Submitted by: statue at freebsd dot sinica dot edu dot tw
|
Mon, 23 Feb 2004
|
[ 01:03 kris ]
BROKEN on 4.x: does not fetch
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
Fri, 21 Nov 2003
|
[ 03:09 linimon ] (Only the first 10 of 47 ports in this commit are shown above. )
statue@freebsd.sinica.edu.tw has asked for all the maintained
ports to be reset to ports@FreeBSD.org. We're sorry to see you
go and want to thank you for your help in the past.
PR: ports/59515
Submitted by: statue@freebsd.sinica.edu.tw
|
Sun, 16 Nov 2003
|
[ 04:22 vanilla ]
Fix build on -current.
Noticed by: kris@
|
Sun, 9 Nov 2003
|
[ 12:12 vanilla ]
Add wenju 1.1, collection of writing tools in Chinese.
PR: 58181
Submitted by: Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
|
Number of commits found: 50 |