non port: comms/hamlib/distinfo |
Number of commits found: 28 |
Tuesday, 18 Apr 2023
|
13:53 Diane Bruce (db)
comms/hamlib: Update to 4.5.5
Version 4.5.5
* rig_get_conf deprecated and replaced by rig_get_conf2
* 2023-04-05
* rot_get_conf deprecated and replaced by rot_get_conf2
* Add park to rotorez.c
* Change FT1000MP Mark V model names to align with FT1000MP
* Fix rig power on/off from rigctl cmd line and rigctld
* Enable async mode by default to prevent WSJT-X crash on IC9700 with
PR: ports/267682
Reported by: takefu@airport.fm
14a99ee |
Tuesday, 24 Jan 2023
|
18:24 Diane Bruce (db)
comms/hamlib: Update to 4.5.3
Fairly lengthy changes we were quite out of date...
I did do a quick API check.
Version 4.5.3
* 2022-12-31
* Fix serial.c for hardware flow control on Linux and MacOSy
* Add QRPLabs QCX/QDX rig -- not quite a TS480
* Fix QRP QRDX firmware bugs in IF message so PTT works now
* FTDX5000 will now remember startup front/read settings and restore it
* Fix FTDX5000 write_delay with microham
* Fix grep error on MingW build
Version 4.5.2
* 2022-12-23
* Fix PowerSDR ability to do commands while powered off
* Fix TX-500 operations
* Fix FTDX5000 to return to MIC input on closing
* Fix rig.c calling rig_get_mode when backend does not have get_mode
* Fix kenwood_ts890_get_level
* Add Prosistel D elevation CBOX az to fix problem with azimuth control
* Fix FT736R gpredict usage by adding cached get_freq
* Fix get_powerstat problem with Log4OM/Flex and others
* Fix -R option to not need argument
* Fix -R option to close rig on last rigctld client disconnect
* Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency
* Add --disable-parallel configure option for mingw builds on Linux
Version 4.5.1
* 2022-12-08
* FT2000, FTDX3000/D, FT891, FT991, FT950, FTDX5000 now set CAT TOT to 100ms
* Add missing NB2 setting to FT-950, FTDX-1200, FT-2000, FTDX-3000, FTDX-5000,
FTDX-9000
* Add missing meter reading to TS-890S -- thanks to Geore Baltz N3GB
* Fix FT736 VFOB freq and mode set
* Added send_raw to rigctl -- see rigctl man page
* Fix AGC Level dumpcaps on most rigs
* Fix rig_send_raw to return bytes read, fill buffer, and also work with fixed
length response/null terminator
* Change all Kenwood rigs to 500ms serial timeout
* Fix dumpcaps filter printout to only show declared filters
* Fix triggering PTT on XGComms device on Linux
* Fix level_gran in all rigs
* Add RIG_FUNC_TUNER to flrig.c
* Fix FT-991 level_gran (needs to be done for lots of rigs)
* Fix man page rigctl to show units for LEVEL items
* Fix Flex6xxx if_len
* Fix FLRig set_ptt
* Fix missing KEYSPD to TS890
* rigctl 'W' command can now use a singled char terminator like ; that allows
for variable length responses with no timeout -- e.g. W FA; ;
* New RIG_LEVEL_USB_AF to control audio gain from rig to computer -- to allow
AGC function in software using RF and USB_AF
* Add RIG_LEVEL_AGC_TIME to allow AGC/OFF to be set for IC-7300, IC-9700,
IC-705
* Add RIG_FUNC_OVF_STATUS to get overflow status for IC-7300, IC-9700, IC-705,
and IC-R8600
Version 4.5
* 2022-10-30
* New rotator utility https://www.pianetaradio.it/blog/catrotator/
* Add FT-710
* Add Rohde&Schwartz EK89X receiver
* Add Xeigu X5105
* Add Gemini DX-1200 HF-1K Amplifiers
* Kenwood rigs should now support AI command packets
* Add FT-990UNI for older 990 ROMs 1.2 and earlier
* Add FT-650
* Add get_separator and set_separator and -S option for rigctld -- node-red
applicability
* Add GRBLTRK rotor project -- two axis rotor
* Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
* Add ability to use cat_string to FLRig via the "w" and "W" commands
* Add -B/--mapa2b to rigctlcom
Allows rigctlcom to map set_freq on VFOA to VFOB instead
This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
Clicking on CW Skimmer will change VFOB instead of VFOA to allow working
dxpeditions where the fox is staying on frequency
* Add password capability to rigctld via -A switch.
rigctld -A will produce a consistent shared key for any specific password
that can used in \password and rig_set_password
TBD The shared key can also be placed in .hamlib_settings
* Asynchronous rig data output handling to support transceive and spectrum
data. Mikael, OH3BHX
Example for the IC-7300 to multicast on port 20001 and provide async rig
information
rigctld --port=20001 --model=3073 --serial-speed=115200
--rig-file=/dev/serial/... --set-conf=rts_state=OFF --set-conf=dtr_state=OFF
--multicast-addr=224.0.0.1 --multicast-port=20001 --set-conf=async=1
Also, spectrum data output needs to be enabled with: \set_func SPECTRUM 1
* See new set_conf option async for some Icom rigs
* Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
* Rig state poll routine to serve commonly used data like frequency and mode
from cache. Mikael, OH3BHX
* deprecated hamlib_port_t at front of rig_state structure -- new one at end of
structure
* New rig_send_raw to send/read raw command to rig
* New RIG_LEVEL_BAND_SELECT for Yaesu rigs
* New rig_get_conf2 to replace rig_get_conf buffer overflow potential
* New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
* Added Barrett 4050 -- not functional yet
* Added TCI 1.X -- not functional yet
* Added TM-V71(A)
* Added IC-F8101
* Added JRC JST-145 and JST-245
* Added Xiegu X108G, G90, and X6100
* Added CODAN Envoy and NGS
* Added Lab599 TX-500
* Added GOMSPACE GS100
* Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as they never
worked as intended
* Deprecated: field rig_caps.transceive and RIG_TRN_* macros
PR: ports/267682
Reported by: takefu@airport.fm
Tested by: db
974c429 |
Wednesday, 12 Jan 2022
|
01:06 Diane Bruce (db)
comms/hamlib: Update to 4.4
- Some patches not needed now due to adrian@ patches sent upstream.
- Additional changes by @takefu added RIG_FUNC_SEND_VOICE_MEM from git
For a complete log of changes to Hamlib, please visit:
http://sourceforge.net/p/hamlib/code/commit_browser
Major changes in 4.0 affecting usage
Most rig model numbers have changed
RIG_LEVEL_VOX has been deprecated and replaced by RIG_LEVEL_VOXDELAY
rigctl 'f' command now returns VFO argument too
rigctl 'y' and 'Y' command now take/show antenna argument and option.
range_list items are undergoing changes towards a different model TBD
RTS/DTR PTT sharing is off by default now -- use serial_share=1 option to
enable
PR: ports/261105
Reported by: takefu@airport.gm
763fc70 |
Friday, 3 Dec 2021
|
00:53 Diane Bruce (db)
comms/hamlib: Major updates needed for other programs
"it is necessary to update
https://github.com/Hamlib/Hamlib/releases/tag/4.3.1
for the functioning of new programs like wsjtz / wsjtx / cqrlog / fldigi
tks lu9dce"
From Hamlib NEWS
Hamlib -- History of visible changes.
Copyright (C) 2000-2003 Frank Singleton
Copyright (C) 2000-2021 Stephane Fillod, and others
Copyright (C) 2000-2021 Michael Black W9MDB, and others
Please send Hamlib bug reports to hamlib-developer@lists.sourceforge.net
Version 4.3.1
* 2021-09-14
* Bug fix release
- Do not do vfo_fixup on satmode rigs
- Fix compilation of misc.c with gmtime_r replacement function for
mingw
- Fix python build. For some reason casting tp vfo_t in the
RIG_VFO_N macro broke the swig parsing
- Append the missing information to build hamlib v4.3 for Android
NDK
- Change set_icom_set_mode_with_data to not change mode unless
necessary
- Since Icom rigs default to filter 2 if a filter is not selected
we will do the same when turning on data mode
- Fix segfault in kenwood_set_vfo
- scripts: Update example in readme, since 4.0 817 is 1020
- Make testlibusb.c compatible with libusb < 1.0.23
Note: On systems with libusb < 1.0.23 a warning will be emmitted
but compliation should proceed without error.
- Update testlibusb.c warning to "may be" instead of "will be"
- Change kenwood to only set VFOA default on 1st rig_open call
Version 4.3
* 2021-09-01
* libusb-1.0.23 or greater is now required or use --without-libusb
* Generating documentation now requires GNU source-highlighter.
* Added IC-575
* Less VFO swapping of newer Icom rigs -- zero swapping in WSJTX and
JTDX
* Dual rotator control in rotctl -R option
* Started work on simulators -- very crude right now but usable to debug
some things
* Overhaul of rig split -- reverse split (VFOA=RX VFOB=TX) should work
for rigs capable of it
Starting VFO does not matter -- rig will end up on RX VFO
S VFOA 1 VFOB
S VFOB 1 VFOA
S Main 1 Sub
S Sub 1 Main
Version 4.2
* 2021-05-17
* New rig_get_mode_bandwidths -- returns token set for bandwidths for
given mode
Rig command: \get_mode_bandwidths CW
Mode=CW
Normal=500Hz
Narrow=50Hz
Wide=2400Hz
* New rig_get_info -- returns token set for all vfos where order does
not matter
This is a string return to allow for easy future expansion without
changing the API
New tokens may be introduced and can be skipped if not used by clients
Rig command: \get_rig_info
VFO=Main Freq=145000000 Mode=None Width=0 RX=1 TX=1
VFO=VFOB Freq=145000000 Mode=FM Width=15000 RX=0 TX=0
Split=0 SatMode=0
Rig=Dummy
App=Hamlib
Version=20210429
CRC=0xf49f4708
* New rig_get_vfo_info
Rig command: \get_vfo_info VFOA
Freq: 145000000
Mode: None
Width: 0
Split: 0
SatMode: 0
* FILPATHLEN has changed to HAMLIB_FILPATHLEN
* USRP lib and gnuradio are deprecated and will be removed in 5.0
* Added Radan rotator
* Added Malachite SDR
* Major rework for PRM80
* Add twiddle_timeout and twiddle_rit --set-conf options
rigctld --set-conf=twiddle_timeout=5,twiddle_rit=1
This will set the twiddle timeout to 5 seconds and turn on
twiddle_rit
For twiddle timeout VFOB will not be polled for 5 seconds after
VFO twiddling
is detected
* rigctld --twiddle is deprecated and will be removed in 5.0 along with
get_twiddle and set_twiddle
* Rework Doxygen manual including default layout for Doxygen 1.9.1. So
far
the amplifier, rotator, and utilities API sections have been updated.
The
rig (radio) section remains to be updated.
Version 4.1
2021-01-31
* rigctld and rigs should be more robust for disconnect problems
* Several fixes for Icom and Yaesu rigs
* Nobody should need to use rig->caps or rig->state anymore
If you need a variable added please contact us.
Note that rig->state abstraction is not implemented yet...no need
known
* New rig_get_caps_int and rig_get_caps_cptr functions to replace using
caps-> values
* New rig_get_function to replace using caps-> function pointers
* Fix shared library problem with WSJTX, JTDX, and JS8Call
* New model Barrett 950
Version 4.0
2020-11-29
* API/ABI changes, advance ABI to 4 0 0.
* Add GPIO and GPION options for DCD. Jeroen Vreeken
* New backend: ELAD FDM DUO. Giovanni, HB9EIK.
* New RIG_LEVEL_RFPOWER_METER_WATTS level
* All channel functions now take a vfo argument
* New rotator backend: iOptron. Bob, KD8CGH
* New model: Icom IC-R8600. Ekki, DF4OR
* New utility: rigctlcom. Mike, W9MDB
* New model: FT847UNI for unidirectional early serial numbers. Mike, W9MDB
* Remove GNU Texinfo files and build system dependency.
* Rig model numbers have changed to allow future growth
* Fix a lot of static code analysis errors and warnings. Mike, W9MDB
* Rearrange directory structure to put rigs and rotators sources
under their own subdirectories. Mike, W9MDB
* rig_get_channel changed to add read_only flag.
* rigctl(d) f command also returns VFO now.
* caching of vfo, frequency, mode, and ptt speeds up rigctld for all.
* caching of kenwood/yaesu "IF" speeds up polling from WSJTX/JTDX.
* rig_get_channel now has read_only flag but it still needs to be
implemented based on rig behavior, so if you use rig_get_channel you
may get a RIG_ENIMPL error to contact us for fixing it.
* New rig backend for Elecraft K4.
* New rig backend for PowerSDR (Flex and Apache users).
* Many fixes and enhancements. Mike, W9MDB and many contributors
* PTT port is no longer shared by default, use --set-conf=ptt_share=1 to
enable
PR: ports/260065
Reported by: castilloeduardo@outlook.com.ar
8e39e79 |
Wednesday, 27 Feb 2019
|
03:13 db
Update to hamlib 3.3
* New models, R&S xk2100, TRXMAnager, Meade LX200
* HTML manual is now generated at 'make dist' so users don't
need GNU Info tools installed. TNX Greg, N1DAM for the suggestion.
|
Saturday, 25 Mar 2017
|
13:21 db
As stated by Kyle Evans <bsdports@kyle-evans.net>
"As in PR 196937, comms/hamlib fails to detect C++ compiler under emulation.
A patch for this was introduced in r377901 and then removed in r398432,
but I suspect it was still needed. I think the proper solution is to
re-introduce the patch that was removed, but I can't properly test it
myself because I'm failing to rebuild my arm.armv6 poudriere jail."
re-introduce missing diff
portlint again
redo checksum
PR: ports/217972
Reported by: Kyle Evans <bsdports@kyle-evans.net>
Reviewed by: mikael.urankar@gmail.com
|
Sunday, 1 Jan 2017
|
03:27 db
Version 3.1
2016-12-31
* Fix kenwood_set_mode for ts590s and mode CW, RTTY or AM.
Tks Tom, DL1JBE
* Proper IPV6 and dual stack networking. Bill, G4WJS
* Add a new command line option '--no-restore-ai' ('-n') to rigctl.
Bill, G4WJS
* Fix missing PKTUSB mode setting code for FT-817 & FT-897. Bill, G4WJS
* New Prosistel rotor backend from IZ7CRX
* Install daemon man files to man1. Nate, N0NB
* Migrate from libusb-0.1 to libusb-1.0. Stephane, F8CFE
* Added support for Icom IC-2730. robinolejnik
* Added support for the Icom IC-7300. Mike, W9MDB
* Add send_morse to icom rigs. Mike, W9MDB
* added instructions how to compile on OSX. DH1TW
* New Perseus model. Stephane, F8CFE
* Added Lua binding and demo script. Ervin, HA2OS
* Added test to support Flex 6300. Bill, KB4AAA
* Many bug fixes and feature enhancements to the code base. See the
Git commit log for complete details.
|
Friday, 8 Apr 2016
|
00:00 shurd
Update to latest release
|
Friday, 2 Oct 2015
|
13:39 db
The Hamlib Group is pleased to announce the release of Hamlib 3.0.
This release of Hamlib introduces a change to the version scheme.
Essentially, the leading '1.' characters have been dropped so '3.0' is a
direct follow on from the '1.2.' releases and has been configured to be
ABI compatible with the '1.2.' releases.
Bug fixes to this release will start with '3.0.1' through '3.0.n'.
The next releases will be '3.1' through '3.n' until the next major
release.
Files are hosted at the Hamlib prjoect page at SourceForge.net:
https://sourceforge.net/projects/hamlib/files/hamlib/3.0/
The changes include:
Version 3.0
2015-09-20
* Kill RPC backends and rpc.rigd/rpc.rotd
* Remove -e|--end-marker option from rigctld and rotctld
* Build system updates--remove obsolete macros, autogen.sh now
runs autoreconf to invoke Autotools to bootstrap the build
system, libltdl is installed into the source tree as a part
of the build system bootstrap and is included in the source
tarball, ABI version is set to be compatible with the 1.2
series, all Autotools installed files are copied rather than
symlinked and put in the build-aux directory, building
rigmem and rigmatrix are now user selectable at configure
run time, building static libraries are disabled by default.
Fixed TCL binding installation, fixed Perl binding build so it
is not invoked by 'make dist' and clean up build files. Cleaned
up bindings builds to occur in alphabetical order. Use new
ax_pkg_swig macro and update ax_python_devel macro. Test for
presence of pkg-config before testing for pkg-config use.
* Implement new RIT/XIT activation/deactivation through rig_get/set_func
+()
* IC-PCR1500/2500 default write_delay to 0, IC-746/756, IC-PCR8500
fixes, pcr.c, pcr1500.c: Add DSP support. TNX Paul, KE7ZZ
* WinRadio G313 updates. TNX Julian Campbel
* Readline editing and history support added to rigctl interactive
mode. Implement options for reading and writing history file.
* Readline editing and history support added to rotctl interactive
mode. Implement options for reading and writing history file.
* A new manual draft written in Texinfo added. Both GNU Info and single
HTML files are built and distributed, requires makeinfo.
* Android build system support. See android/README.android. Android
Makefile fragments are included in source tarballs.
* Monolithic library, thanks to Remi Chateauneu for the majority of
the work! This allows enabling of a single static library so
static libs are enabled by default. Removes dependency on
libltdl.
* Fixes to easycomm, TNX Steve AI4QR.
* Fixes to port handling allowing PTT and CAT on the same port. TNX
Bill, G4WJS.
* New Peaberry models V1 and V2 added to kit backend. TNX ON8VQ
and R2AEE.
* New IC-7100 model. TNX Martin, CT1IQI.
* Use AC_CHECK_LIB macro to search for libusb rather than rely on
pkg-config. Preserve environment variables LIBUSB_CFLAGS and
LIBUSB_LIBS as user precious variables. Two features,
--with-xml-support and --enable-usrp still rely on pkg-config so
only invoke pkg-config when either or both of these features are
selected. Only the Winradio g313 model uses libdl so test for it
only when Winradio backend is enabled.
* New IC-M700PRO, IC-M710, IC-M802.
* New Icom ID-5100 model.
* New rotor, cnctrk by KI4SBL
* Many backend fixes and updates from many contributors (see Git
log for complete details).
|
Saturday, 3 Nov 2012
|
01:03 db
Changes in this release from 1.2.15.2 are:
Version 1.2.15.3 2012-11-01
* Fix configure.ac so that rigctld/rotcld work on Win32 platform
* Add NSIS script to build executable installer on Win32 platform
* Remove unsupported commands on IC-756 (non-Pro model) from AK6I
* Fix set_split in netrigctl.c to properly accept the split value.
TNX, N2ADR.
* IC-R8500: Add RIG_LEVEL_AF to has_set_level. TNX John, EI7IG
* ADAT updates from Frank, DG1SBG, needed for stable operation.
This is likely the last planned release of the Hamlib 1.2 series.
Development will now focus on the Hamlib 3 series which is now
configured to be ABI compatible with the 1.2 series.
Feature safe: yes
|
Thursday, 9 Aug 2012
|
00:03 db
- Update to Version 1.2.15.2
2012-08-05
* Read eeprom value for digital mode from FT-857
* Clean up TS-950 series commands and read mode using IF command
* Fix GS-232A/B rotor command terminations
* Fix warnings and other issues found by mingw-w64
* Allow seamless access to ports higher than COM9 on Windows
* Fix ineffective packed attribute on WinRadio
* Correct low signal strength S-meter error on AR7030+
* Updates to HiQSDR by Jim, N2ADR
|
Saturday, 4 Feb 2012
|
01:03 db
- Update to 1.2.15
From change log:
* New models: TT-599 Eagle, IC-RX7, IC-1275, HiQSDR,
ADAT ADT-200A, DttSP UDP, TM-D710
* New rotator backends:
* Celestron (telescope mount)
* Fixes and features: K3, various other rigs
* Update LGPL/GPL header boilerplate
* Quell various compiler errors
* Add CM108 PTT capability
|
Thursday, 4 Aug 2011
|
00:36 db
- Update to hamlib 1.2.14
From release e-mail:
The Hamlib team announces the release of Hamlib 1.2.14, the first since
adopting a timed release schedule of 1 Feb and 1 Aug each year. Changes
since 1.2.13 include:
* New models: SigFox Transfox, TH-D72A, IC-7410, IC-9100, IC-R9500,
KX3, V4L2 API support (untested),
* New rotator backends: IF-100, TS-7400
* Fixes and features: K3/KX3, Build Win32 from script,
rigctld/rotctld ported to Mingw32, Win32 build fixes, remove
obsolete bundled libtool files, rigctl improvements, FUNcube
string test (works with V0.0 and V1.0), Yaesu newcat.c fixed to
use rig->state.current_vfo to store vfo value, add a command to
halt rigctld, select PTT source in Kenwood backends (TS-590S),
make sure scan is stopped at IC-9000 opening, thd72 get channel
data (alpha).
For a complete log of changes to Hamlib 1.2.14, please visit:
http://hamlib.git.sourceforge.net/git/gitweb.cgi?p=hamlib/hamlib;\
a=shortlog;h=refs/heads/Hamlib-1.2.14
|
Sunday, 29 May 2011
|
22:38 db
From releaae e-mail:
This release is a bug fix release and includes no new features or
backends:
Version 1.2.13.1
* 2011-05-29
* Conversion to Git SCM and updated README documentation for Git SCM
* Mingw32 build fixes
* FUNcube dongle USB fixes for Win32
* Added kit/README.funcubedongle
* Bug fix--K3 antenna selection function
Users of the FUN Cube dongle on Win32 and K3 users on all platforms are
urged to upgrade to Hamlib 1.2.13.1.
73, de Nate >>
|
Monday, 14 Mar 2011
|
02:30 db
Update to
Version 1.2.13
2011-03-12
* New models: VX-1700, FUNcube, FiFi-SDR, KTH-SDR Si570, FT-5000,
TS-590S
* Rotor fixes and features: SPID
* New Rotor backend: F1TE Tracker
* Fixes and features: TS-440S, K2, K3, SR-2200, THF6A, THF7E, NewCAT
rigs serial port defaults, TM-D700,
* Removed libtool tree from source tree
* Removed old DocBook files
* Allow USB device's VID/PID/Vendor/Product to be explicitly specified
* Doxygen documentation updates and new style sheet
|
Thursday, 10 Jun 2010
|
14:01 db
- Update to 1.2.11
- Adds a few more radios
|
Wednesday, 25 Nov 2009
|
17:30 db
- Update to 1.2.10
- Add port docs
|
Saturday, 28 Feb 2009
|
02:20 db
- Update to latest vendor version of hamlib.
- patch for rig.h now in vendor version.
|
Wednesday, 12 Nov 2008
|
16:29 db
- Update to 1.2.8
- Clean up port.
|
Tuesday, 19 Feb 2008
|
01:24 db
- Update to 1.2.7
|
Sunday, 25 Feb 2007
|
02:39 db
- update to 1.2.6.1
- make objformat obsolete
- configure.ac patch no longer needed as I fixed it upstream
Pointy hat to: kris
Approved by: ehaupt (mentor)
|
Tuesday, 26 Dec 2006
|
20:38 itetcu
Update to 1.2.6
PR: 107212
Submitted by: Diane Bruce (maintainer)
|
Monday, 1 May 2006
|
03:31 mnag
- Update to 1.2.5
- Take MAINTAINER
- Use OPTIONS
PR: 96025
Submitted by: Diane Bruce <db___db.net>
|
Sunday, 22 Jan 2006
|
08:22 edwin
SHA256ify
Approved by: krion@
|
Friday, 5 Nov 2004
|
18:51 pav
- Update to 1.2.2
PR: ports/72982
Submitted by: Sebastian Yepes F. [ESN] <esn@x123.info> (maintainer)
|
Tuesday, 20 Apr 2004
|
12:31 pav
- Update to 1.2.0
PR: ports/63013, ports/65758
Submitted by: Sebastian Yepes F. [ESN] <esn@x123.info> (maintainer)
Carl Makin <carl@stagecraft.cx>
|
Wednesday, 31 Mar 2004
|
03:12 trevor
SIZEify (maintainer timeout)
|
Friday, 16 May 2003
|
12:19 patrick
Add hamlib 1.1.4,
shared libraries for Amateur Radio Equipment
Control Applications.
PR: 51638
Submitted by: Sebastian Yepes <esn@x123.info>
| Number of commits found: 28 |
|