21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

    258a9884

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:40 mat 

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

13:18 mat 

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

 

05:41 lwhsu 

- Update maintainer's email address

Submitted by:	maintainer (via facebook chat)

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

10:27 az 

- add stage support

Approved by:	portmgr (blanket infrastructure)

 

16:03 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)

 

06:27 az 

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

 

08:54 az 

- Trim Makefile header
- Remove check for perl < 5.10

PR:		ports/178901
Submitted by:	az
Approved by:	maintainer

 

18:42 swills 

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

16:15 pgollucci 

- Revert ports/165605 as requested by portmgr@

Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.

PR:             ports/165605
Approved by:    portmgr (bapt)
Feature safe:   yes (I sure hope so)

18:45 pgollucci 

- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
  RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}

PR:             ports/165605
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

20:21 erwin 

Require perl 5.10

Submitted by:   maintainer

06:59 lwhsu 

Add p5-SMS-Send-TW-Socket2Air 0.01, SMS::Send driver for Socket2Air.

PR:             ports/143054
Submitted by:   Jui-Nan Lin <jnlin at csie.nctu.edu.tw>