18:46 pawel 

- Update comms/spandsp to version 0.0.6 [1]
- Convert all comms/spandsp-devel consumers to use newer comms/spandsp
- Bump affected ports
- Mark comms/spandsp-devel as deprecated and set expiration date
- Add upgrade instructions to UPDATING

PR:		194399 [1]
Submitted by:	Nikola Kolev <koue@chaosophia.net> [1]
Approved by:	madpilot (asterisk ports), maintainer timeout (other)

 

10:19 tijl 

comms/spandsp-devel:
- Fix installation of lib/libspandsp.so.2 (when patching configure.ac
  almost all USE_AUTOTOOLS are needed)
- Replace CONFIGURE_ARGS with CPPFLAGS/LIBS

Reported by:	antoine

 

11:43 amdmi3 

- Switch comms/spandsp-devel to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
- Use install-strip target instead of STRIP_CMD
- Add/fix libspandsp.so versions in LIB_DEPENDS to differentiate between spandsp
and spandsp-devel

Approved by:	portmgr blanket

 

19:11 adamw 

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

 

15:03 adamw 

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

 

21:31 nemysis 

These ports are no longer used or cared for.

comms/spandsp-devel

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library
- Fix typo

deskutils/kupfer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change install, cosmetical changes

deskutils/rubrica

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use tar:bzip2 instead of USE_BZIP2=yes
- Strip libraries
- Change REINPLACE and install, cosmetical changes

graphics/Hermes

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use tar:bzip2 instead of USE_BZIP2=yes
- Don't silence warnings
- Remove TODO and TODO.conversion from DOCS
- Strip library

graphics/aoi

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/autoq3d

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/box

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

graphics/boxer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes

graphics/cbrpager

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/cbview

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/cbviewer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/eos-movrec

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change pkg-plist, remove mtree

graphics/evolvotron

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Break lines around 80 characters

graphics/fracplanet

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS
- Change Desktop entry file
- Break lines around 80 characters

graphics/gnofract4d

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/icon-slicer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use the new format for LIB_DEPENDS
- Remove TODO from DOCS

graphics/lcdtest

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Simplify dependency for x11-fonts/liberation-fonts-ttf

graphics/multican

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

graphics/photopc

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes

graphics/pngcheck

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/pngwriter

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/pstoedit

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip libraries

graphics/skencil

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes
- Strip libraries

misc/boxes

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes
- Mute RM and MKDIR

misc/explosions

- Bump PORTREVISION for MAINTAINER change
- Remove FTP master site
- Reset maintainer to ports@

misc/wmweather+

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use the new format for LIB_DEPENDS

multimedia/dvdauthor

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

multimedia/dvdid

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library

multimedia/freetuxtv

- Change Makefile header, use my name and @FreeBSD.org email
- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

multimedia/gtk-youtube-viewer

- Change Makefile header, use my name and @FreeBSD.org email
- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Break lines around 80 characters

net/wlan2eth

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes

 

21:17 nemysis 

- Change maintainer email to @FreeBSD.org
- Use the new format for LIB_DEPENDS
- USES gmake instead of USE_GMAKE
- USES pathfix instead of USE_GNOME gnomehack
- Support STAGEDIR

Approved by:	pawel / wg (mentors, implicit

 

16:03 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)

 

10:46 bapt 

Only defined PORTDOCS when DOXYGEN and DOCS are set
That avoids getting @dirrm %%DOCSDIR%% added to the plist when the DOCSDIR is
not created

Reported by:	pkg (PKG_DEVELOPER_MODE)

 

22:16 beech 

- Safe with NOPORTDOCS=yes

PR:		ports/177003
Submitted by:	nemysis <nemysis@gmx.ch> (maintainer)

 

18:41 pawel 

Fix build when DOXYGEN=on

PR:		ports/173517
Submitted by:	Chris Dukes <chris.dukes.aix@gmail.com>

 

16:57 ak 

- Update MASTER_SITES
- Remove vestiges of old OPTIONS

PR:	ports/172485
Submitted by:	nemysis <nemysis@gmx.ch> (maintainer)

 

16:58 rm 

- remove tiff shlib version
- remove indefinite article from COMMENT
- pass maintainership to submitter

PR:		172212
Submitted by:	nemysis <nemysis at gmx dot ch>

 

11:36 crees 

- Update to 0.0.6pre21

- While here, add OPTIONS

- Use gnomehack and patch configure.ac to stop excessive manual patching

 

06:33 linimon 

Attempt to fix build on -current.

PR:             ports/167985
Submitted by:   truckman

20:15 mezz 

Turn the maintainership over to ports@. We never ask for this port. Please do
not turn over to gnome@ just because "Turn over to gnome team since it's used
by Gnome ports". Ask us first if we want to maintain any port.

23:25 swills 

- Turn over to gnome team since it's used by Gnome ports

PR:             ports/163635
Approved by:    melifaro (maintainer)

07:34 ade 

Sync to new bsd.autotools.mk

16:10 garga 

- Update to 0.0.6pre17

PR:             ports/150161
Submitted by:   garga@
Approved by:    maintainer timeout (2 weeks)

11:46 dinoex 

- update to jpeg-8

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

18:29 mezz 

Fix a typo, libtool15 -> libtool:15 in USE_AUTOTOOLS.

Approved by:    Alexander V. Chernikov <melifaro@ipfw.ru> (maintainer)

10:48 timur 

PR:             136092
Submitted by:   maintainer
Update port to the 0.0.6pre12 version.

23:53 amdmi3 

- Update to 0.0.6pre7
- Pass maintainership to submitter

PR:             133839
Submitted by:   "Alexander V. Chernikov" <melifaro at ipfw dot ru>

19:29 pav 

Reset maintainership (the domain has expired):

<joe@joeholden.co.uk>
    (reason: 553 5.3.5 system config error)

----- Transcript of session follows -----
553 5.3.5 127.0.0.1. config error: mail loops back to me (MX problem?)
554 5.3.5 Local configuration error

13:20 araujo 

- Update to 0.0.4.p15.

PR:             ports/118032
Submitted by:   Balwinder S Dheeman <bdheeman@gmail.com>
Approved by:    stas (mentor, implicit), Joe Holden <joe@rewt.org.uk>
(maintainer)

10:50 pav 

- Update to 0.0.4pre3

PR:             ports/113698
Submitted by:   Joe Holden <joe@joeholden.co.uk> (maintainer)

08:19 miwi 

- Remove 4.X gruft

PR:             111948
Submitted by:   Marcelo Araujo <araujo@bsdmail.org>
Approved by:    maintainer

09:07 kris 

Use libtool port instead of included one to avoid objformat a.out botch

08:51 miwi 

spandsp-devel is a DSP library to support fax functions.
Basically it implements a software fax machine to fax out or in.

WWW: http://www.soft-switch.org/

PR:             107871
Submitted by:   Joe Holden <joe@joeholden.co.uk>
Repocopy by:    marcus