| non port: converters/fribidi/Makefile |
|
SVNWeb
|
Number of commits found: 41 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 9ee281e (Only the first 10 of 127 ports in this commit are shown above. )
converters: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Keda <admin@lissyara.su>
* Alex Semenyaka <alex@rinet.ru>
* Alexandr Kovalenko <never@nevermind.kiev.ua>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrey A. Chernov <ache@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Blaz Zupan <blaz@amis.net>
* Brent J. Nordquist <bjn@visi.com>
* Carlos J. Puga Medina <cpm@fbsd.es> (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 21 Apr 2022
|
[ 10:10 Tobias C. Berner (tcberner) ] 182e508
converters/fribidi: update to 1.0.12
Changes:
* Various fuzzing fixes.
|
|
Thu, 14 Oct 2021
|
[ 10:23 Daniel Engberg (diizzy) ] 8f1b773
converters/fribidi: Update to 1.0.11
Enable OPTIMIZED_CFLAGS (-O3 from upstream), some tests are ~10%
faster on my Intel I7-3770K CPU
Connect upstream's test suite to port
Changelog: https://github.com/fribidi/fribidi/releases/tag/v1.0.11
PR: 259156
Approved by: arrowd (mentor)
Differential Revision: https://reviews.freebsd.org/D32490
|
|
Fri, 10 Sep 2021
|
[ 21:17 Bernhard Froehlich (decke) ] 47c9356
converters/fribidi: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 24 Sep 2020
|
[ 12:43 bapt ]  
Update fribidi to 1.0.10
Note that according to
https://abi-laboratory.pro/index.php?view=timeline&l=fribidi
2 symbols were removed since the version we have, but according to the check I
have
done those 2 symbols are present in 1.0.10, meaning it is binary compatible
|
|
Thu, 10 Sep 2020
|
[ 18:55 tcberner ] (Only the first 10 of 47 ports in this commit are shown above. )
Move some gnome@ ports to desktop@
As gnome@ is lacking active committers at the moment, transfer some of its
ports [1] up the stack to the desktop@ group, in hope that this way we get some
updates in as the set of people that "should feel responsible" grows.
As soon as gnome@ grows some committers again, this can (and should) of course
be reverted again.
[1] The list of ports chosen in this move consits of all the ports that are
required to build x11/kde5.
Approved by: portmgr (bapt)
Differential Revision: https://reviews.freebsd.org/D26362
|
|
Thu, 27 Feb 2020
|
[ 21:25 sunpoet ]
Update MASTER_SITES to unbreak this port
===> License LGPL21 accepted by the user
=> fribidi-0.19.7.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/.
=> Attempting to fetch http://fribidi.org/download/fribidi-0.19.7.tar.bz2
fetch: http://fribidi.org/download/fribidi-0.19.7.tar.bz2: size unknown
fetch: http://fribidi.org/download/fribidi-0.19.7.tar.bz2: size of remote file
is not known
fribidi-0.19.7.tar.bz2 10 kB 66 kBps 00s
=> Fetched file size mismatch (expected 648299, actual 10414)
=> Trying next site
=> Attempting to fetch
http://distcache.FreeBSD.org/local-distfiles/%SUBDIR%/fribidi-0.19.7.tar.bz2
fetch:
http://distcache.FreeBSD.org/local-distfiles/%SUBDIR%/fribidi-0.19.7.tar.bz2:
Bad Request
=> Couldn't fetch it - please try to retrieve this
=> port manually into /usr/ports/distfiles/ and try again.
*** Error code 1
Stop.
make: stopped in /usr/ports/converters/fribidi
PR: 244477
Reported by: Dries Michiels <driesm.michiels@gmail.com>
Approved by: portmgr (blanket)
|
|
Fri, 1 Apr 2016
|
[ 13:18 mat ] (Only the first 10 of 172 ports in this commit are shown above. )
Fixup some whitespace at the beginning of lines problems.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 21 Dec 2015
|
[ 18:35 sunpoet ]
- Update to 0.19.7
- Add LICENSE
- Pet portlint: fix diff header of patch files
Changes: http://cgit.freedesktop.org/fribidi/fribidi/tree/NEWS
PR: 204871
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 23 days)
|
|
Sun, 2 Aug 2015
|
[ 15:03 tijl ] (Only the first 10 of 234 ports in this commit are shown above. )
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 31 Aug 2014
|
[ 11:54 tijl ] (Only the first 10 of 33 ports in this commit are shown above. )
converters/fribidi:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
|
Mon, 9 Jun 2014
|
[ 11:21 olgeni ] (Only the first 10 of 120 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.
CR: D196
Approved by: portmgr (bapt)
|
|
Mon, 3 Feb 2014
|
[ 04:11 miwi ]
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 16:05 bapt ] (Only the first 10 of 161 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
converters)
|
|
Tue, 19 Mar 2013
|
[ 13:04 eadler ] (Only the first 10 of 218 ports in this commit are shown above. )
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
|
|
Fri, 8 Mar 2013
|
[ 10:51 kwm ] (Only the first 10 of 417 ports in this commit are shown above. )
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
|
|
Wed, 9 Nov 2011
|
[ 15:26 miwi ] (Only the first 10 of 250 ports in this commit are shown above. )
- Remove WITH_FBSD10_FIX, is no longer needed
|
|
Fri, 28 Oct 2011
|
[ 18:00 miwi ] (Only the first 10 of 13 ports in this commit are shown above. )
- Fix build FreeBSD 10
|
|
Sun, 3 Oct 2010
|
[ 15:45 mezz ]
-Disable glib for it will not enable if it exists in the system.
-Update the WWW.
PR: ports/151166
Submitted by: John Hein <jhein@symmetricom.com>
|
|
Sun, 23 Aug 2009
|
[ 17:17 marcus ]
Add a fribidi-config wrapper script around pkg-config to fix some older
port builds.
|
|
Sat, 22 Aug 2009
|
[ 17:26 marcus ]
Update to 0.19.2.
PR: 137946
Submitted by: Anonymous <swell.k@gmail.com>
|
|
Wed, 22 Aug 2007
|
[ 12:10 ahze ]
Update to 0.10.9
|
|
Thu, 7 Jun 2007
|
[ 09:34 pav ]
- Update to 0.10.8
|
|
Sun, 28 Jan 2007
|
[ 09:07 kris ] (Only the first 10 of 103 ports in this commit are shown above. )
Use libtool port instead of included one to avoid objformat a.out botch
|
|
Sun, 5 Nov 2006
|
[ 02:40 mezz ]
INSTALLS_SHLIB -> USE_LDCONFIG.
Found by: portlint (cports.sh)
|
|
Tue, 18 Apr 2006
|
[ 05:52 bland ]
Update to 0.10.7
PR: 95912
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Mon, 12 Sep 2005
|
[ 07:42 ahze ]
- Readd PORTREVISION, I removed this planning on updating to 0.10.5
but it disn't play nice with 4.x
|
[ 07:29 ahze ]
- User newer libtool15 instead of libtool13
- Update WWW line
|
|
Wed, 9 Mar 2005
|
[ 10:17 ahze ]
- Update WWW: line
- Add freedesktop.org to MASTER_SITES
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Mon, 16 Jun 2003
|
[ 20:52 adamw ] (Only the first 10 of 14 ports in this commit are shown above. )
Utilize USE_GNOME= pkgconfig.
|
|
Fri, 18 Apr 2003
|
[ 21:18 marcus ]
Remove USE_GNOMENG.
|
|
Sat, 22 Feb 2003
|
[ 06:24 marcus ]
* Install pkgconfig file in correct location
* Don't install .la files
* Assign maintainership to gnome@ since this will be used for AbiWord2
|
|
Thu, 20 Feb 2003
|
[ 16:58 knu ] (Only the first 10 of 12 ports in this commit are shown above. )
De-pkg-comment.
|
|
Thu, 13 Jun 2002
|
[ 12:00 tobez ]
Update to 0.10.4.
PR: 39225
Submitted by: Oliver Braun <obraun@informatik.unibw-muenchen.de>
|
|
Fri, 19 Apr 2002
|
[ 17:32 ijliao ]
add fribidi 0.10.3
A Free Implementation of the Unicode Bidirectional Algorithm
|
Number of commits found: 41 |
As an Amazon Associate I earn from qualifying purchases.