| non port: converters/libticonv/Makefile |
|
SVNWeb
|
Number of commits found: 26 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 8 Nov 2019
|
[ 09:31 tobik ]   (Only the first 10 of 39 ports in this commit are shown above. )
c*: Add missing USES={gnome,php,sdl,xorg}
|
|
Sat, 9 Jun 2018
|
[ 15:31 danfe ]
Grab maintainership of TiLP2+ libraries, they are too important to be orphans.
|
|
Fri, 8 Jun 2018
|
[ 15:49 tijl ] (Only the first 10 of 18 ports in this commit are shown above. )
Update TiLP2+libraries and drop maintainership.
TiLP2 1.18, libticables2 1.3.5, libticalcs2 1.1.9, libticonv 1.1.5, and
libtifiles2 1.1.7
|
|
Thu, 8 Dec 2016
|
[ 19:52 tijl ] (Only the first 10 of 551 ports in this commit are shown above. )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Thu, 3 Jul 2014
|
[ 00:07 amdmi3 ]
- Switch to USES=libtool, drop .la files
- Convert USE_BZIP2 to USES
Approved by: portmgr blanket
|
|
Tue, 22 Oct 2013
|
[ 15:59 tijl ]
- Support staging.
- USES=gmake.
- Make the Requires field private in pkgconfig file.
|
|
Fri, 20 Sep 2013
|
[ 16:05 bapt ] (Only the first 10 of 161 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
converters)
|
|
Wed, 24 Apr 2013
|
[ 08:01 tijl ]
Set MAINTAINER to my @FreeBSD.org address.
Suggested by: crees
|
|
Tue, 23 Apr 2013
|
[ 06:34 bapt ] (Only the first 10 of 21 ports in this commit are shown above. )
Convert all c categories to USE=pkgconfig
|
|
Mon, 22 Apr 2013
|
[ 19:36 tijl ] (Only the first 10 of 22 ports in this commit are shown above. )
Update tilp2 and its libraries:
- tilp2 1.17
- libticables2 1.3.4, libticalcs2 1.1.8, libticonv 1.1.4, libtifiles2 1.1.6
- Add NLS option, remove libtool dependency, clean up Makefile and pkg-descr
- Bump PORTREVISION and trim Makefile header for emulators/tilem and
emulators/tiemu3.
|
|
Tue, 17 Jan 2012
|
[ 19:06 rm ] (Only the first 10 of 16 ports in this commit are shown above. )
- update converters/libticonv to 1.1.3
- update devel/libtifiles2 to 1.1.5
- update comms/libticables2 to 1.3.3
- update comms/libticalcs2 to 1.1.7
- update comms/tilp2 to 1.16
- bump PORTREVISION for emulators/tiemu3
- add LICENSE (GPLv2)
I did this in single commit because this ports are tightly interconnected,
so chanses are good to (temporarily) broke something, committing them
separatedly.
PR: 164024
Submitted by: Tijl Coosemans <tijl at coosemans dot org> (maintainer)
|
|
Thu, 16 Jun 2011
|
[ 15:46 jlaffaye ] (Only the first 10 of 16 ports in this commit are shown above. )
Update converters/libticonv to 1.1.2 [1]
Update comms/libticables2 to 1.3.2 [2]
Update devel/libtifiles2 to 1.1.4 [3]
Update comms/libticalcs2 to 1.1.6 [4]
Update comms/tilp2 to 1.15 [5]
Bump emulators/tiemu3 [6]
PR: ports/157837 [1], ports/157832 [2], ports/157830 [3],
ports/157836 [4], ports/157838 [5], ports/157839 [6]
Submitted by: Tijl Coosemans <tijl@coosemans.org> [1] [2] [3] [4] [5]
(maintainer) [6]
Approved by: Naram Qashat <cyberbotx@cyberbotx.com> (maintainer) [6], bapt
(mentor)
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 5 Sep 2010
|
[ 18:52 makc ]
Update to 1.1.1
PR: ports/148014
Submitted by: Tijl Coosemans (maintainer)
|
|
Sun, 13 Dec 2009
|
[ 22:49 amdmi3 ] (Only the first 10 of 21 ports in this commit are shown above. )
- Update maintainer's email
- Fix some pkg-descrs
- Update some MASTER_SITES
PR: 140966
Submitted by: Tijl Coosemans <tijl@coosemans.org> (maintainer from new email)
Approved by: portmgr (miwi)
|
|
Sat, 22 Aug 2009
|
[ 00:15 amdmi3 ] (Only the first 10 of 78 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with B,C
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 6 Jun 2008
|
[ 13:15 edwin ]
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Tue, 29 Jan 2008
|
[ 10:18 miwi ]
- Update to 1.1.0
PR: 119748
Submitted by: Naram Qashat <cyberbotx@cyberbotx.com>
Approved by: maintainer
|
|
Wed, 5 Sep 2007
|
[ 11:10 araujo ]
- Update to 1.0.4.
PR: ports/115974
Submitted by: Tijl Coosemans <tijl@ulyssis.org> (maintainer)
Approved by: stas (mentor)
|
|
Fri, 31 Aug 2007
|
[ 02:05 araujo ]
- Update to 1.0.2.
PR: ports/115489
Submitted by: Naram Qashat <cyberbotx@cyberbotx.com>
Approved by: itetcu (mentor), Tijl Coosemans <tijl@ulyssis.org> (maintainer)
|
|
Mon, 19 Feb 2007
|
[ 06:58 rafan ]
- Update to 1.0.1
PR: ports/109292
Subimtted by: Tijl Coosemans <tijl at ulyssis.org> (maintainer)
|
|
Tue, 31 Oct 2006
|
[ 18:05 alepulver ]
The ticonv library is a library to work with the various TI
calculator character sets.
WWW: http://tilp.info/
- Tijl Coosemans
tijl@ulyssis.org
PR: ports/104407
Submitted by: Tijl Coosemans <tijl at ulyssis.org>
|
Number of commits found: 26 |
As an Amazon Associate I earn from qualifying purchases.