17:21 miwi 

- Chase database/sqlite3 slib bump

Approved by:	portmgr (myself)

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

10:42 bapt 

Convert to USES=pgsql

With hat:	portmgr

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

18:08 bapt 

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in databases

 

12:29 mva 

- Fix the usage of 'python' to get rid of the implicit lang/python
  dependency

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

08:50 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

 

10:44 ak 

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

 

07:08 bapt 

Convert databases to USES=pkgconfig

 

05:40 bapt 

new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility

This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG

it can take the following arguments:
 - yes (meaning build only dep)
 - build (meaning build only dep)
 - run (meaning run only dep)
 - both (meaning run and build dep)

From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.

While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config

With Hat:	portmgr
Exp-runs by:	bapt (pointhat-west), beat (pointyhat)

23:24 dougb 

For the ports that are maintained by ports@ that have pkgconfig as their
only USE_GNOME feature, convert to a BUILD_DEPENDS. This avoids both the
bug of the bogus run depend introduced by bsd.gnome.mk, and also avoids
needlessly pulling that file in.

16:59 bapt 

Convert to new options framework

05:45 miwi 

- Update 0.8.3

PR:             165572
Submitted by:   Armin Pirkovitsch <armin@frozen-zone.org>

12:25 miwi 

- Chase unixODBC shlib bump

01:40 dougb 

Remove optional dependencies on databases/xbase, which is about to be removed

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

13:15 ale 

Bump PORTREVISION for ports linking to default libmysqlclient.

07:34 ade 

Sync to new bsd.autotools.mk

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

00:18 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with D

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

15:52 erwin 

Remove Firebird option as that port expired in February.

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

13:17 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

19:31 pav 

- Bump PORTREVISION for the previous fix

08:06 miwi 

- Fix build after xorg cleanup

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

15:26 sem 

- Drop maintainership. I did not use them for ages.

00:21 edwin 

Remove always-false/true conditions based on OSVERSION 500000

09:42 alexbl 

 - Make Python 2.5.1 the default Python version
 - Add significantly better support in bsd.python.mk for working with
   Python Eggs and the easy_install system

Tested by:      pointyhat runs
Approved by:    pav (portmgr)
Most work by:   perky
Thanks to:      pav

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

13:28 sem 

- Update to 0.8.1

09:01 sem 

- NOT_FOR_ARCH=ia64. Does not build.

Reported by:    kris mail

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

17:56 sem 

- Remove USE_REINPLACE from my ports

20:37 sem 

- Update to 0.8
- Add Firebird and Paradox support

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

10:54 sem 

- Fix a case when python was installed with a non-standard PREFIX.

Requested by:   kris

06:46 sem 

- Add missed pkg-config dependency

Reminded by:    kris via pointyhat

20:31 sem 

- Update to 0.7.4a

Pushed by:      Andrej Zverev <az@inec.ru>

09:09 sem 

- Fix pkg-plist. Unbreak.

Reported by:    kris via pointyhat

00:56 kris 

BROKEN: Incomplete pkg-plist

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

15:54 sem 

- Update to 0.7.3
- Fix build with modules other than mysql
  reported by   Paul J. Pathiakis <pathiaki@pathiaki.com> &
                RÓcz JÓnos <wpooh@freestart.hu>

00:35 girgen 

Split the postgresql ports into a server and a client part.

All ports depending on postgresql shall use the USE_PGSQL=yes knob
defined in Mk/bsd.ports.mk. Bumping portrevisions where needed.

PR:             75344
Approved by:    portmgr@ (kris), ade & sean (mentors)

17:05 sem 

- Update to 0.7.2
    *  View support added
    * hk_connection: passworddialog accepts a defaultdatasource for ODBC now
    * SQLite3 support added
    * local databases in different directories can be opened now
    * Bugfixes

17:38 sem 

- Update to 0.7.1
- Add SQLite2 support
- add startup file to run ldconfig

03:19 sem 

Update to 0.7

PR:             ports/69099
Submitted by:   Andrej Zverev <az@inec.ru>
Approved by:    krion (mentor)

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

19:20 sem 

Change email address for my ports.

Approved by:    krion (mentor)

05:34 kris 

Add missing manpages

01:23 linimon 

Update to 0.6.3:

 - the password will be stored in the file .hk_classes/SERVER/driver.conf,
   the RW-flags are set to the user only
 - hk_presentation: presentation local datasources can be defined in the
   datasource dialog
 - Python script handles uninstall now
 - (many other minor API changes and bugfixes: see ChangeLog)

Also, the port consolidates several patches into patching one Makefile.in.

PR:             ports/65166
Submitted by:   Sergey Matveychuk <sem@ciam.ru> (maintainer)

19:20 krion 

- Use USE_ICONV knob

Approved by:    portmgr

07:38 krion 

- Fix default options

PR:             ports/64674
Submitted by:   maintainer

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

19:10 arved 

- Update to 0.6.2
- portlint
- utilize OPTIONS
- Add ODBC driver
- Pass Maintainership to submitter

PR:             64072
Submitted by:   Sergey Matveychuk <sem@ciam.ru>

18:33 arved 

Fix python support.
Bump PORTREVISION

Reported by:    enoal <sreco@xmission.com>

00:48 seanc 

Add PostgreSQL support.  Make MySQL support optional, but on by default.
Specifying WITHOUT_MYSQL removes MySQL support.  WITH_POSTGRESQL speaks
for itself.  Port revision bump.

13:28 arved 

Remove bogus autoconf dependency
USE_MYSQL
Add LDCONFIG_DIRS

12:38 arved 

Add hk_classes,
C++ library which allows rapid development of database applications.

Note: hk_classes works with mysql, postgresql und ODBC, but this port only
supports mysql at the moment.

Prodded by:     enoal <sreco@xmission.com>
PR:             41380