| non port: databases/py-PyGreSQL/Makefile |
|
SVNWeb
|
Number of commits found: 57 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] d076ad9 (Only the first 10 of 718 ports in this commit are shown above. )
databases: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* "Mahdi Mokhtari <mokhi64@gmail.com>"
* "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
* <hvo.pm@xs4all.nl>
* <jsmith@resonatingmedia.com>
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Snelson <Alan@Wave2.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ]   (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Thu, 24 Dec 2020
|
[ 13:46 kai ] (Only the first 10 of 166 ports in this commit are shown above. )
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python)
|
|
Fri, 17 Jul 2020
|
[ 11:55 wen ]
- Update to 5.2
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Mon, 20 May 2019
|
[ 08:46 wen ]
- Update to 5.1
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Mon, 10 Sep 2018
|
[ 13:14 mat ] (Only the first 10 of 995 ports in this commit are shown above. )
Add DOCS options to ports that should have one.
Also various fixes related to said option.
PR: 230864
Submitted by: mat
exp-runs by: antoine
|
|
Mon, 30 Jul 2018
|
[ 12:41 wen ]
- Update to 5.0.6
|
|
Thu, 26 Jul 2018
|
[ 00:04 wen ]
- Update to 5.0.5
PR: 230042
Submitted by: hsn@sendmail.cz
|
|
Tue, 8 Aug 2017
|
[ 02:01 wen ]
- Update to 5.0.4
|
|
Mon, 12 Dec 2016
|
[ 03:27 wen ]
- Update to 5.0.3
|
|
Tue, 20 Sep 2016
|
[ 02:22 wen ]
- Update to 5.0.2
|
|
Tue, 23 Aug 2016
|
[ 02:30 wen ]
- Update to 5.0.1
|
|
Tue, 22 Mar 2016
|
[ 13:02 wen ]
- Update to 5.0
- Runs on both python2 and python3
- Add LICENSE
- Take maintainership
|
|
Wed, 1 Apr 2015
|
[ 17:33 amdmi3 ]
- Strip library
|
|
Mon, 29 Dec 2014
|
[ 21:24 rm ]
databases/py-PyGreSQL: fix fetch, convert to USES
|
|
Wed, 8 Oct 2014
|
[ 17:13 bapt ]
Convert to USES=pgsql and USES=python
|
|
Sun, 9 Feb 2014
|
[ 11:11 rm ]
- install port documentation into stagedir uncoditionally and remove inclusion
of bsd.port.options.mk
- unmute docs installation command
- remove no more needed patch
- bump PORTREVISION
|
|
Mon, 13 Jan 2014
|
[ 21:00 rene ] (Only the first 10 of 702 ports in this commit are shown above. )
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat)
|
|
Sat, 28 Sep 2013
|
[ 11:13 mva ] (Only the first 10 of 16 ports in this commit are shown above. )
- Convert to PYDISTUTILS_AUTOPLIST
- Enable stage support
- Limit to the supported python versions
- Change to new LIB_DEPENDS where necessary
- Switch to new OPTIONS framework where necessary
|
|
Fri, 20 Sep 2013
|
[ 16:13 bapt ] (Only the first 10 of 927 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)
|
|
Wed, 27 Mar 2013
|
[ 04:52 rm ]
- fix fetch
Reported by: pointyhat (miwi)
|
|
Wed, 9 Jan 2013
|
[ 15:55 bdrewery ]
- Update to 4.1.1
|
|
Thu, 3 Jan 2013
|
[ 17:44 rm ]
- update to 4.1
- trim Makefile header
- update MASTER_SITES
- remove indefinite article from COMMENT
- limit python version to 2.x only
- convert to optionsng (NOPORTDOCS case)
- patch out setuptools for from setup.py for now (mainly to not use
PYEASYINSTALL_OSARCH)
- update formatting in pkg-descr and change tab with space at WWW
Reported by: D'Arcy J.M. Cain <darcy@PyGreSQL.org> (on ports@)
|
|
Sat, 19 Sep 2009
|
[ 21:44 pav ]
- Reset longterm inactive maintainer
Feature safe: yes
|
[ 21:44 pav ]
- Update to 4.0
PR: ports/136203
Submitted by: Wen Heping <wenheping@gmail.com>
Approved by: maintainer timeout (girgen; 2 months)
Feature safe: yes
|
|
Fri, 6 Jun 2008
|
[ 13:17 edwin ] (Only the first 10 of 155 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 1 Sep 2007
|
[ 22:11 pav ]
- Update to 3.8.1
PR: ports/109026
Submitted by: Radim Kolar SF.NET <hsn@sendmail.cz>
Approved by: maintainer timeout (girgen; 6 months)
|
|
Mon, 30 Jul 2007
|
[ 09:42 alexbl ] (Only the first 10 of 445 ports in this commit are shown above. )
- Make Python 2.5.1 the default Python version
- Add significantly better support in bsd.python.mk for working with
Python Eggs and the easy_install system
Tested by: pointyhat runs
Approved by: pav (portmgr)
Most work by: perky
Thanks to: pav
|
|
Thu, 4 May 2006
|
[ 21:41 edwin ] (Only the first 10 of 364 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with D
|
|
Thu, 23 Feb 2006
|
[ 08:04 girgen ]
Accidentally removed portepoch, believing it was portrevision.
Pointy hat to: me
|
|
Wed, 22 Feb 2006
|
[ 22:39 girgen ]
Update to 3.8
PR: 93701
|
|
Tue, 19 Jul 2005
|
[ 22:52 girgen ]
Updating to latest version, 3.6.2
Approved by: ade, seanc (implicit)
|
|
Mon, 31 Jan 2005
|
[ 00:35 girgen ] (Only the first 10 of 107 ports in this commit are shown above. )
Split the postgresql ports into a server and a client part.
All ports depending on postgresql shall use the USE_PGSQL=yes knob
defined in Mk/bsd.ports.mk. Bumping portrevisions where needed.
PR: 75344
Approved by: portmgr@ (kris), ade & sean (mentors)
|
|
Mon, 6 Dec 2004
|
[ 03:59 girgen ] (Only the first 10 of 23 ports in this commit are shown above. )
Add myself as committer, and use my @FreeBSD.org address.
Approved by: ade (mentor)
|
|
Thu, 2 Sep 2004
|
[ 15:58 arved ]
Update to 3.5
Allow building with postgresql client only installation.
PR: 71212
Submitted by: Palle Girgensohn <girgen@pingpong.net>
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Fri, 30 Jan 2004
|
[ 04:28 linimon ]
Update PyGreSQL to 3.4. Previous version was packed with the
postgresql dist, and while postgresql was version 7.3.5, PyGreSQL's
own version just bumped from 3.3 to 3.4. Hence portepoch.
PR: ports/61597
Submitted by: Palle Girgensohn <girgen@pingpong.net> (maintainer)
|
|
Mon, 12 Jan 2004
|
[ 16:46 olgeni ]
Unbreak using the postgresql73 distfile.
PR: 61194
Submitted by: Palle Girgensohn <girgen@pingpong.net>
|
|
Thu, 4 Sep 2003
|
[ 13:32 osa ]
[1] Use new depends scheme for postgresql slave ports:
${MAKE} -V ... instead of .include <...>
[2] Utilize ${DOCSDIR}
Submitted by: Palle Girgensohn <girgen@pingpong.net> (maintainer) [1],
osa [2]
PR: 56350, 56404
|
|
Fri, 7 Mar 2003
|
[ 02:35 ade ] (Only the first 10 of 32 ports in this commit are shown above. )
Remove pkg-comment from the remaining special cases.
Approved by: portmgr (implicitly)
|
|
Tue, 11 Feb 2003
|
[ 05:34 seanc ]
Uncomment dependency on libpq.3/postgresql.
Submitted by: kris/bento
|
|
Thu, 6 Feb 2003
|
[ 00:33 edwin ]
Update py-PyGreSQL to version 7.3
This patch really only takes over maintainership from
ports@freebsd.org. Since I manage most of the postgresql
ports, I might as well take this one too, I guess?
I have verified that it builds with postgresql-7.3
PR: ports/45887
Submitted by: Palle Girgensohn <girgen@pingpong.net>
|
|
Sat, 4 Jan 2003
|
[ 15:53 seanc ] (Only the first 10 of 26 ports in this commit are shown above. )
Chase libpq version bump.
|
|
Wed, 23 Oct 2002
|
[ 14:33 wjv ]
- Make this port a subport of databases/postgresql7, since the development of
PyGreSQL has been folded into that of PostgreSQL itself.
- This update effectivly takes PyGreSQL to version 3.3, which is distributed
with PostgreSQL 7.2.3.
- Byte-compile installed modules to ensure clean deinstallation.
- Install documentation under $DOCSDIR.
- Remove Makefile from $FILESDIR - not required anymore.
- Remove patch-pgdb.py - not required any longer.
- Add two patches to ensure installation is $PREFIX-clean.
- Update pkg-comment and pkg-descr to reflect the current status of the port.
|
|
Fri, 21 Jun 2002
|
[ 17:40 nectar ]
Drop MAINTAINER: I'm not really taking care of these anymore.
|
|
Fri, 30 Nov 2001
|
[ 20:20 nectar ]
The patch for using mx.DateTime instead of DateTime was incomplete. Update it.
|
|
Tue, 16 Oct 2001
|
[ 15:37 nectar ]
Fix import of DateTime module.
|
|
Sat, 21 Apr 2001
|
[ 12:43 vanilla ] (Only the first 10 of 22 ports in this commit are shown above. )
Fix include directory for postgresql7.1's new layout.
|
|
Thu, 22 Mar 2001
|
[ 13:36 tg ]
Depend on the new py-mx-base.
|
|
Tue, 3 Oct 2000
|
[ 14:52 nectar ]
Update 2.4 -> 3.0
|
|
Fri, 8 Sep 2000
|
[ 13:24 tg ] (Only the first 10 of 26 ports in this commit are shown above. )
Don't break package building on Satoshi's cluster. Explicitly depend on
python1.5:lang/python15.
|
|
Sat, 26 Aug 2000
|
[ 10:15 andreas ]
after removal of old postgresql port fix dependencies for postgresql7 port
thanks to Hwang eunkwang <hek@inter21c.co.kr> for stating this out.
|
|
Tue, 20 Jun 2000
|
[ 14:37 nectar ] (Only the first 10 of 18 ports in this commit are shown above. )
Locally hosted distfiles moved to ftp.freebsd.org.
|
Number of commits found: 57 |
As an Amazon Associate I earn from qualifying purchases.