notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: There is a known problem on production with searching pkg-plist - it returns no results. This problem is not present on stage.freshports.org
non port: databases/py-peewee/Makefile
SVNWeb

Number of commits found: 22

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:21 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:d076ad94e206dda108061fe99ddb860d93cc6d16  commit hash:d076ad94e206dda108061fe99ddb860d93cc6d16  commit hash:d076ad94e206dda108061fe99ddb860d93cc6d16  d076ad9  (Only the first 10 of 718 ports in this commit are shown above. View all ports for this commit)
databases: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  "Mahdi Mokhtari <mokhi64@gmail.com>"
  *  "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
  *  <hvo.pm@xs4all.nl>
  *  <jsmith@resonatingmedia.com>
  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Snelson <Alan@Wave2.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 6 Jul 2022
[ 02:47 Wen Heping (wen) search for other commits by this committer ]    commit hash:1e689a00a551b1fb1a3f03d6545ed06824daf5b4  commit hash:1e689a00a551b1fb1a3f03d6545ed06824daf5b4  commit hash:1e689a00a551b1fb1a3f03d6545ed06824daf5b4  1e689a0 
databases/py-peewee: Update to 3.15.0

PR:		264745
Reported by:	wen@
Approved by:	maintainer(timeout, >= 14 days)
Tue, 24 Aug 2021
[ 17:59 Dmitry Marakasov (amdmi3) search for other commits by this committer ]    commit hash:044229965d3a4bc4ab717eaa3458e12ee5a3776c  commit hash:044229965d3a4bc4ab717eaa3458e12ee5a3776c  commit hash:044229965d3a4bc4ab717eaa3458e12ee5a3776c  0442299 
databases/py-peewee: force cythonization

Remove pregenerated cython .c files to force regeneration. This
fixes build with python 3.9+, with which pregenerated files are not
compatible.

Approved by:	portmgr blanket
Fri, 28 May 2021
[ 08:41 Mikael Urankar (mikael) search for other commits by this committer ]    commit hash:e0725b836d5206b2d501a25dff6fdb7b027ed842  commit hash:e0725b836d5206b2d501a25dff6fdb7b027ed842  commit hash:e0725b836d5206b2d501a25dff6fdb7b027ed842  e0725b8 
databases/py-peewee: Update to 3.14.4

PR:		256195
Approved by:	Matthias Petermann <matthias@petermann-it.de> (maintainer)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Tue, 29 Dec 2020
[ 12:30 rene search for other commits by this committer ] Original commit   Revision:559572
databases/py-peewee: drop optional dependency on expired databases/py-MySQLdb
Mon, 28 Dec 2020
[ 23:02 antoine search for other commits by this committer ] Original commit   Revision:559531 (Only the first 10 of 1942 ports in this commit are shown above. View all ports for this commit)
Drop python 2.7 support from a few ports

With hat:	portmgr
Thu, 24 Dec 2020
[ 13:46 kai search for other commits by this committer ] Original commit   Revision:559094 (Only the first 10 of 166 ports in this commit are shown above. View all ports for this commit)
Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)
Wed, 10 Apr 2019
[ 06:18 antoine search for other commits by this committer ] Original commit   Revision:498530 (Only the first 10 of 399 ports in this commit are shown above. View all ports for this commit)
Bump a few PORTREVISIONs after r498529

With hat:	portmgr
Wed, 19 Dec 2018
[ 06:24 wen search for other commits by this committer ] Original commit   Revision:487785
- Update to 3.8.0

PR:		234150
Submitted by:	wenheping2000@hotmail.com
Approved by:	maintainer
Sat, 11 Aug 2018
[ 14:33 miwi search for other commits by this committer ] Original commit   Revision:476923
- Update to 3.6.4

PR:		230307
Submitted by:	ndowens@yahoo.com
Approved by:	maintainer
Sponsored by:	iXsystems Inc.
Wed, 20 Jun 2018
[ 17:05 mat search for other commits by this committer ] Original commit   Revision:472884 (Only the first 10 of 1617 ports in this commit are shown above. View all ports for this commit)
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
Mon, 5 Mar 2018
[ 08:06 yuri search for other commits by this committer ] Original commit   Revision:463624
databases/py-peewee: Update to 3.1.2

Maintainer's timeout expired: matthias@petermann-it.de

Port changes:
* Changed to DISTVERSION
* Removed option DOCS (not needed)
* Added USES=localbase sqlite
* Added USE_PYTHON=cython concurrent
* Added stripping
* Removed MYSQL_VARS

PR:		219175
Approved by:	tcberner (mentor, implicit)
Mon, 8 Jan 2018
[ 15:47 mat search for other commits by this committer ] Original commit   Revision:458431
databases/py-MySQLdb only supports Python 2, restrict ports that uses it.

Sponsored by:	Absolight
Thu, 30 Nov 2017
[ 15:50 mat search for other commits by this committer ] Original commit   Revision:455210 (Only the first 10 of 2423 ports in this commit are shown above. View all ports for this commit)
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 22 Apr 2017
[ 10:58 sunpoet search for other commits by this committer ] Original commit   Revision:439160
Update to 2.9.2

- While I'm here:
  - Add LICENSE_FILE
  - Add NO_ARCH

Changes:	https://github.com/coleifer/peewee/releases
PR:		218805
Submitted by:	Matthias Petermann <matthias@petermann-it.de> (maintainer)
Mon, 31 Oct 2016
[ 02:25 wen search for other commits by this committer ] Original commit   Revision:424971
- Update to 2.8.5

PR:		213368(based on)
Submitted by:	wen@(myself)
Approved by:	maintainer(timeout, >14 days)
Thu, 5 May 2016
[ 18:01 pi search for other commits by this committer ] Original commit   Revision:414656
databases/py-peewee: 2.3.1 -> 2.8.0

Changes:
  https://github.com/coleifer/peewee/releases

PR:		208826
Submitted by:	wen
Approved by:	matthias@petermann-it.de (maintainer timeout)
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Sat, 23 Aug 2014
[ 19:09 wg search for other commits by this committer ] Original commit   Revision:365776
databases/py-peewee: update to 2.3.1

- Convert to USES python

PR:		192864
Submitted by:	maintainer
Sat, 31 May 2014
[ 08:31 mva search for other commits by this committer ] Original commit   Revision:355944
Peewee is a MIT licensed object relational mapper for Python. It allows access
of relational databases (MySQL / MariaDB, PostgreSQL, SQLite3) in a pretty
object oriented way. There is usually no need to write SQL.

PR:		ports/185470
Submitted by:	Matthias Petermann <matthias@petermann-it.de>

Number of commits found: 22