11:08 Nuno Teixeira (eduardo) 

databases/rrdtool12: Move man pages to share/man

Approved by:	portmgr (blanket)

    c595a72

23:08 Muhammad Moinur Rahman (bofh) 

Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

    18c6e18

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

databases: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  "Mahdi Mokhtari <mokhi64@gmail.com>"
  *  "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
  *  <hvo.pm@xs4all.nl>
  *  <jsmith@resonatingmedia.com>
  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Snelson <Alan@Wave2.org>
  *  Aldis Berjoza <graudeejs@gmail.com>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov,com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Novitsky
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Degtyarev <alexey@renatasystems.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andrei Antoukh <niwi@niwi.be>
  *  Andrew McNaughton <andrew@scoop.co.nz>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Andrey Simonenko
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Antonio Carlos Venancio Junior (<antonio@php.net>)
  *  Autrijus Tang <autrijus@autrijus.org>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@FreeBSD.org>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Choe, Cheng-Dae
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Larsen <darth@vader.dk>
  *  Damian Gerow <dgerow@afflictions.org>
  *  Daniel O'Connor
  *  Daniel Wijnands <daniel@itxl.nl>
  *  Dave Green <dg@fastmail.co.uk>
  *  David Thiel <lx@FreeBSD.org>
  *  Davíð Steinn Geirsson <david@isnic.is>
  *  Denis Generalov <gd.workbox@gmail.com>
  *  Denis Generalov <gd@rambler-co.ru>
  *  Denis Shaposhnikov <dsh@bamus.cz>
  *  Dermot Tynan <dtynan@kalopa.com>
  *  Dmitry Liakh <dliakh@ukr.net>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Domas Mituzas <midom@dammit.lt>
  *  Dominic Mitchell
  *  Don Owens <don@regexguy.com>
  *  Dryice Dong Liu <dryice@dryice.name>
  *  Edwin Groothuis (edwin@mavetju.org)
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Espen Tagestad <espen@tagestad.no>
  *  Espen Volden aka voldern <voldern@hoeggen.net>
  *  Evan Sarmiento <bsdports@wayfair.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frank Wall <fw@moov.de>
  *  Ganbold Tsagaankhuu <ganbold@FreeBSD.org>
  *  Gary Palmer <gpalmer@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geraud CONTINSOUZAS <geraud@gcu.info>
  *  Gerrit Beine <tux@pinguru.net>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Hansjoerg Pehofer <hansjoerg.pehofer@uibk.ac.at>
  *  Henk van Oers <hvo.pm@xs4all.nl>
  *  Henrik Hodne <henrik@hodne.io>
  *  Hiroyuki Hanai <hanai@FreeBSD.org>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Ilia Chipitsine <ilia@jane.cgu.chel.su>
  *  Ivan Voras <ivoras@FreeBSD.org>
  *  J.F. Dockes
  *  Jaap Boender <jaapb@kerguelen.org>
  *  Jake Smith <jake@xz.cx>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Janos.Mohacsi@bsd.hu
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jens Rehsack <rehsack@liwing.de>
  *  Jeremy Chadwick <koitsu@FreeBSD.org>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Jim Ohlstein <jim@ohlste.in>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Horn <joehorn@gmail.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Chen <johnpupu@gmail.com>
  *  John Marino <marino@FreeBSD.org>
  *  John Merryweather Cooper
  *  John Merryweather Cooper et al
  *  Jon Nistor <nistor@snickers.org>
  *  Jonathan Weiss (<jw@innerewut.de>)
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joshua D. Abraham <jabra@ccs.neu.edu>
  *  Jov <amutu@amutu.com>
  *  Jov amutu@amutu.com
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julien Laffaye <kimelto@gmail.com>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  Keith Gaughan <k@sterechro.me>
  *  Kevin Bowling <kbowling@freebsd.org>
  *  Kimo <kimor79@yahoo.com>
  *  Kimura Fuyuki <fuyuki@nigredo.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Balker Rasmussen <lbr@FreeBSD.org
  *  Lars Balker Rasmussen <lbr@FreeBSD.org>
  *  Lars Eggert <larse@isi.edu>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Loïc BARTOLETTI
  *  Loïc BARTOLETTI <lbartoletti@FreeBSD.org>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Mahdi Mokhtari <mokhi64@gmail.com>
  *  Mahlon E. Smith <mahlon@martini.nu>
  *  Marc G. Fournier <scrappy@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <martin@matuska.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mathieu Arnold <m@absolight.net>
  *  Matthew Seaman
  *  Matthias Andree <mandree@FreeBSD.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Max Khon
  *  Max Khon <fjoe@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Winking <mwfp@foldl.net>
  *  Mikael URANKAR and Loïc BARTOLETTI
  *  Mike Carlson (carlson39@llnl.gov)
  *  Mikhail T. <michael@fun-box.ru>
  *  Mikhail Teterin
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Mikolaj Golub <trociny@FreeBSD.org>
  *  Mirko Zinn <mail@derzinn.de>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Nick Hibma <n_hibma@freebsd.org>
  *  Nick Hilliard <nick@foobar.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicolas Embriz <nbari@tequila.io>
  *  Nicolas de Bari Embriz <nbari@dalmp.com>
  *  Oleg Sharoiko <os@rsu.ru>
  *  Olexander Melnyk <olexander.v.melnyk@gmail.com>
  *  Oliver Eikemeier <eikemeier@fillmore-labs.com>
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Palle Girgensohn <girgen@FreeBSD.org>
  *  Palle Girgensohn <girgen@partitur.se>
  *  Palle Girgensohn <girgen@pingpong.net>
  *  Parv <parv@pair.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Avalos <pavalos@theshell.com>
  *  Philip M. Gollucci
  *  Philip M. Gollucci <philip@p6m7g8.com>
  *  Philip Stoev <philip.stoev@galeracluster.com>
  *  Pierre-Emmanuel Andre <pea@raveland.org>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qing Feng <qingfeng@douban.com>
  *  Quinton Dolan <q@onthenet.com.au>
  *  Radim Kolar
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Rick Miller
  *  Robert Kruus <rob.kruus@gmail.com>
  *  Rod Taylor <ports@rbt.ca>
  *  Roland van Laar <roland@micite.net>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Roy Boerner
  *  Rozhuk Ivan <rozhuk.im@gmail.com>
  *  Rusty Nejdl
  *  Ryan Steinmetz <rpsfa@rit.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Sam Lawrance <boris@brooknet.com.au>
  *  Scott McWhirter <scott@surreytech.co.uk>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sean Chittenden <seanc@FreeBSD.org>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sergei Vyshenski <svysh.fbsd@gmail.com>
  *  Sergey A. Osokin <osa@FreeBSD.org.ru>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sevan Janiyan <venture37@geeklan.co.uk>
  *  Sheldon Hearn <sheldonh@FreeBSD.org>
  *  Stanislav Svirid <count@211.ru>
  *  Stefan Schmidt <stefan.schmidt@stadtbuch.de>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steve Wills <swills@freebsd.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  T. William Wells <bill@twwells.com>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Tom Judge <tj@FreeBSD.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Torsten Zuhlsdorff <ports@toco-domains.de>
  *  Toshiya Saitoh (<toshiya@saitoh.nu>)
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Wen Heping
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  William Grzybowski <wg@FreeBSD.org>
  *  Xin Li <delphij@FreeBSD.org>
  *  Yarema <yds@CoolRat.org>
  *  Yarema <yds@Necessitu.de>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi NAKAYAMA <yoichi@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  Zach Thompson <lin-chi@lastamericanempire.com>
  *  ache@FreeBSD.org
  *  alfred
  *  alp@sfedu.ru
  *  andrew@scoop.co.nz
  *  andrey@kostenko.name
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clive@FreeBSD.org
  *  clsung@dragon2.net
  *  dcf@aracnet.com
  *  elvstone@gmail.com
  *  erikhb@bgnett.no
  *  erwin@FreeBSD.org
  *  gahr
  *  ijliao
  *  ijlioa
  *  ivoras
  *  johnpupu <johnpupu@gmail.com>
  *  kirk@daycos.com
  *  kuriyama
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  loïc bartoletti <lbartoletti@FreeBSD.org>
  *  mharo@FreeBSD.org
  *  michael johnson <ahze@ahze.net>
  *  milki <milki@rescomp.berkeley.edy>
  *  mm@FreeBSD.org
  *  nbm
  *  nectar@FreeBSD.org
  *  nork@FreeBSD.org
  *  nork@cityfujisawa.ne.jp
  *  olevole@olevole.ru
  *  proler@gmail.com
  *  sergey@migsoft.com.ua
  *  sobomax
  *  spam@rm-rf.kiev.ua
  *  stas
  *  tobez
  *  tremere@cainites.net
  *  vanilla
  *  vanilla@
  *  wen@FreeBSD.org
  *  wenheping<wenheping@gmail.com>
  *  wolman@cs.washington.edu
  * # Created by Kevin Bowling <kbowling@FreeBSD.org>
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    d076ad9

15:57 Stefan Eßer (se) 

Fix CONFLICTS_INSTALL in the databases category

Approved by:	portmgr (implicit)

    da00957

21:30 Stefan Eßer (se) 

databases/rrdtool12: Add CPE information

Approved by:	portmgr (blanket)

    6ce215b

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:35 antoine 

Drop optional dependency on python 2.7

PR:		249604

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

16:14 zeising 

Remove databases/rrdtool10

This is an old version of databases/rrdtool, no longer maintained.
Update CONFLICTS in databases/rrdtool and rrdtool12 accordingly.

Reviewed by:	kwm (in part)
Differential Revision:	D6168

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

17:47 mva 

- Convert to USES=python

Approved by:	portmgr (implicit)

 

15:44 mva 

Convert the Python framework bits to USES=python.

Please use USES=python instead of USE_PYTHON.

  USE_PYTHON=yes becomes USES=python
  USE_PYTHON=2.7+ becomes USES=python:2.7+
  USE_PYTHON_BUILD=3.3 becomes USES=python:3.3,build
  ...

A new PYTHON_FEATURES variable was added, which enables certain features for a
port and replaces some knobs at the same time;

  PYTHON_FEATURES=distutils replaces USE_PYDISTUTILS
  PYTHON_FEATURES=autoplist replaces PYDISTUTILS_AUTOPLIST
  PYTHON_FEATURES=py3kplist replaces PYTHON_PY3K_PLIST_HACK
  PYTHON_FEATURES=noegginfo replaces PYDISTUTILS_NOEGGINFO
  PYTHON_FEATURES=concurrent replaces PYTHON_CONCURRENT_INSTALL
  PYTHON_FEATURES=pythonprefix replaces USE_PYTHON_PREFIX

Some knobs have been deprecated and are to be removed in the near future:

  PYTHON_MASTER_SITES - use MASTER_SITE_PYTHON instead
  PYTHON_PKGNAMESUFFIX - use PYTHON_PKGNAMEPREFIX instead
  PYDISTUTILS_INSTALLNOSINGLE - deprecated without replacement

Some knobs have been removed completely:

  PYTHON_MASTER_SITE_SUBDIR
  PYTHON_DISTNAME
  PYTHON_WRKSRC

Several variables specific to the Python framework are no longer passed to the
build environment to avoid polluting dependency builds.

  PYTHON_VERSION is not passed to .MAKEFLAGS anymore
  PYTHON_DEFAULT_VERSION,
  PYTHON_DEFAULT_PORTVERSION and
  PYTHONBASE are not passed to the make environment anymore

The conversion required a couple of ports to be updated to fit the changes and
new requirements. Those included "bsd.python.mk" directly or contained checks
in places, for which the USES framework would fail to provide correct values.

Python modules directly using the upstream Python package (such as py-tkinter
or py-sqlite3) were updated to avoid using the now unnecessary and remmoved
knobs from "bsd.python.mk".

Phabric:	D399
exp-run:	167368 192357
PR:		167368 192357
Reviewed by:	antoine, wg
Exp-run award:	antoine
With hat:	python@
Approved by:	portmgr

 

10:11 amdmi3 

- Fix plist files referencing stagedir by adding USE_PERL+=fixpacklist
- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

18:28 garga 

Support stage

Approved by:	portmgr (blanket)

 

20:59 tijl 

Fix double occurences of USES=

 

18:08 bapt 

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in databases

 

11:10 mat 

Fixup pkgnames.

PR:		ports/184440, ports/184441, ports/184442, ports/184443, ports/184444,
ports/184445, ports/184446, ports/184447, ports/184448, ports/184449,
ports/184450
Submitted by:	mat
Approved by:	portmgr (bapt)

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

09:00 bapt 

Convert to new perl framework

 

17:45 az 

 - Fix build with new site_perl

Submitted by:	olli hauer <ohauer@gmx.de>

 

15:02 beat 

- Convert to optionsng
- Trim Makefile header

 

05:26 dinoex 

- update png to 1.5.10

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

09:34 beat 

- Respect NOPORTEXAMPLES knob

Requested by:   Earl Lapus <earl.lapus AT gmail.com>

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

12:26 beat 

- Add LATEST_LINK

Reported by:    pav
Approved by:    miwi (mentor, implicit)

23:25 beat 

Update my email address to @FreeBSD.org.

Approved by:    miwi (mentor)

15:20 amdmi3 

- Update to 1.2.30
- Fix plist for WITH_PYTHON_MODULE case by adding INSTALLS_EGGINFO

PR:             130788
Submitted by:   "Beat Gätzi" <beat at chruetertee dot ch> (mainainer)

02:34 wxs 

- Update to 1.2.29
- Pass maintainership to submitter

PR:             ports/130310
Submitted by:   beat@chruetertee.ch

10:15 linimon 

Maintainer is no longer active in FreeBSD.

Hat:    portmgr

03:01 koitsu 

- Update to rrdtool 1.2.28
- Add a small patch that gets rid of the "ordering CD from..." sleeps,
  speeding up initial configure time

Update requested by:    Terry Kennedy <terry@tmk.com>

11:11 koitsu 

Addition of databases/rrdtool12, for those of us who prefer to
use the previous release of RRDTool.

Also incorporate the CONFIGURE_TARGET changes (PR ports/126524).