01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

01:48 linimon 

Try but fail to fix build on gcc-based archs.  The fix is necessary but
not sufficient.  It has no effect on clang-based archs.

Approved by:	portmgr (tier-2 blanket)

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

16:19 tcberner 

Update the QScintilla2 ports to 2.10.4

 

18:06 tcberner 

Update py-sip to 4.19.8 and qscintilla2 to 2.10.3

PR:		226487
Exp-run by:	antoine

 

09:55 rakuco 

Update QScintilla 2.10.2.

Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).

Thanks to antoine for the exp-run.

PR:		225928

 

16:13 mat 

Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.

While there replace USE_SQLITE=x by USES=sqlite:x.

PR:		208971
Submitted by:	mat
Exp-run by:	antoine
With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D5951

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

12:45 rakuco 

Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.

Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.

One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.

Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
  because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
  define a build-time dependency on x11-toolkits/py-qt4-gui has moved.

Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).

PR:		205143

 

10:51 rakuco 

Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.

Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.

This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).

Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
                       no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
                 retrieved from the CMAKE_CXX_COMPILER variable in the build
                 system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
                        has no effect on the build system.

Reviewed by:		makc
Differential Revision:	https://reviews.freebsd.org/D3403

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

19:53 rakuco 

Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.

... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.

This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:

- General, belated changes:
  * Use OPTIONS helpers wherever possible, stop including
    <bsd.port.options.mk> when not necessary, stop checking for
    ${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
    add options such as DOCS and/or DEBUG where they were only checked for.

- QScintilla ports:
  * Drop the API option from py-qt4-qscintilla2. It had been broken ever
    since staging support was added, and its existence does not make much
    sense: QScintilla is a hard dependency regardless of the state of this
    option anyway, they all come from the same tarball and the configuration
    script assumes the .api file will always be installed.

- PyQt ports:
  * The configure.py patch shared by all PyQt ports has been trimmed down to
    the minimum. Changes for Qt3 compatibility or for things that are just
    not needed anymore have been removed.

  * Several post-configure targets in the PyQt ports have been removed, as
    they had no effect on the way the ports were built whatsoever.

  * In some cases, instead of calling Python's py_compile.py on `ls *.py
    */*.py */*/*.py` to generate .pyc and .pyo files, we just call
    compileall.py, which is made for this kind of task.

  * The patch + sed hack to build py-qt4-dbussupport has been replaced by
    only extracting the dbus/ directory for that port and excluding it from
    all others.

  * Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
    non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
    portion of all PyQt Makefiles were very similar and contained a lot of
    boilerplate code that can be shared among all of them since they all
    come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
    that, when set, automatically sets several common variables and the
    do-configure target for a port. This allows us to considerably reduce
    the size of all the py-qt4-* Makefiles.

  * To make the above possible and also to allow us to use as many OPTIONS
    helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
    That's what it was used for anyway.

PR:		191990

 

09:41 tijl 

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

 

16:42 vanilla 

remove NO_STAGE.

Approved by:	portmgr@

 

18:08 bapt 

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in databases

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

18:16 makc 

Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip

 

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

01:50 makc 

Chase PyQT update

03:26 rakuco 

Remove CMAKE_USE_PTHREAD from the ports using it.

This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.

Approved by:    avilla (mentor), portmgr (miwi)
Feature safe:   yes

08:13 wen 

- Update to 1.2.2
- Update my email to FreeBSD

Feature safe:   yes

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

14:07 miwi 

sqliteman is the best developer's and/or admin's GUI tool for
Sqlite3 in the world. No joking here (or just a bit only).It
contains the most complette feature set of all tools available.
And much more , it's available for all major platforms, and
it's free.

WWW:    http://sqliteman.sf.net/

PR:             ports/134733
Submitted by:   Wen Heping <wenheping at gmail.com>