| non port: deskutils/simpleagenda/Makefile |
|
SVNWeb
|
Number of commits found: 43 |
|
Wed, 26 Jul 2023
|
[ 00:48 Muhammad Moinur Rahman (bofh)  ]    95274bf (Only the first 10 of 190 ports in this commit are shown above.  )
*/*: Fix build with llvm16 on 13.2-STABLE
As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.
- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
1302507 and less than 1400000
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
|
|
Wed, 19 Jul 2023
|
[ 20:45 Muhammad Moinur Rahman (bofh) ] 1a0e33f
deskutils/simpleagenda: Fix build with llvm16
- Pet portclippy
- Utilize USES=localbase
- Adopt port
Sponsored by: The FreeBSD Foundation
|
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy) ] feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above. )
audio/opus: bump consumers after update to 1.4
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 14 Feb 2021
|
[ 23:21 nc ]   (Only the first 10 of 98 ports in this commit are shown above. )
Update a few GNUstep ports:
* devel/gnustep-make: Update to 2.8.0
* lang/gnustep-base: Update to 1.27.0
* x11-toolkits/gnustep-back: update to 0.28.0
* x11-toolkits/gnustep-gui: update to 0.28.0
Also bump PORTREVISION on dependent ports.
|
|
Thu, 28 May 2020
|
[ 08:43 danfe ] (Only the first 10 of 53 ports in this commit are shown above. )
Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 6).
|
|
Sat, 14 Mar 2020
|
[ 21:56 tcberner ]
deskutils/simpleagenda: unbreak after r528448
Pointy hat: tcberner
PR: 239167
Submitted by: lightside <lightside@gmx.com>
|
|
Thu, 5 Mar 2020
|
[ 20:49 rene ] (Only the first 10 of 26 ports in this commit are shown above. )
Return theraven's ports to the pool after safekeeping his commit bit.
|
|
Sun, 3 Feb 2019
|
[ 15:37 theraven ] (Only the first 10 of 114 ports in this commit are shown above. )
Move Objective-C ports to the v2 GNUstep ABI.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
|
|
Wed, 26 Sep 2018
|
[ 15:23 brooks ] (Only the first 10 of 102 ports in this commit are shown above. )
Update Objective-C LLVM version to 6.0.
Fixes aarch64 build. Reduces depends on obsolete LLVM 4.0.
PR: 230116
Submitted by: mikael.urankar@gmail.com
Approved by: theraven (prior version)
Sponsored by: DARPA, AFRL
|
|
Tue, 20 Mar 2018
|
[ 02:54 truckman ] (Only the first 10 of 18 ports in this commit are shown above. )
Bump PORTREVISION on ports depending on devel/libical.
PR: 226460
|
|
Sun, 3 Dec 2017
|
[ 12:23 theraven ] (Only the first 10 of 96 ports in this commit are shown above. )
Fix configure options for gnustep-make
We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs. This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.
|
|
Mon, 21 Aug 2017
|
[ 13:26 theraven ] (Only the first 10 of 156 ports in this commit are shown above. )
Update GNUstep core libraries.
Update the default Objective-C compiler.
Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.
Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.
|
|
Wed, 3 May 2017
|
[ 17:09 pawel ] (Only the first 10 of 22 ports in this commit are shown above. )
- Update devel/libical to version 2.0
- Bump PORTREVISION in all consumers
- mail/claws-mail-vcalendar now builds, remove IGNORE
- Mark devel/libical-glib as BROKEN
Release Highlights
WARNING: Version 2 IS NOT Binary Compatible with Older Versions
Version 2 is Source Compatible with Older Versions
Lots of source code scrubbing
[New] RSCALE support (requires libicu from http://www.icu-project.org)
[New] CalDAV attachment support (draft-daboo-caldav-attachments)
[New] Resurrect the Berkeley DB storage support
[Bug] issue83: Incorrect recurrence generation for weekly pattern
Handle RRULEs better
Handle threading better
PR: 218711
Submitted by: myself
Approved by: maintainer timeout
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 19 Sep 2015
|
[ 10:33 theraven ] (Only the first 10 of 159 ports in this commit are shown above. )
Make all GNUstep ports install into the System domain so that the Local domain
is available for stuff built from source.
Some ports were already installing in the System domain, for these just remove
the Makefile lines explicitly specifying the install domain.
The rest are installed in the Local domain, remove any overrides, update their
pkg-plists and any explicit paths in the Makefiles and then bump port revision.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D2977
|
|
Thu, 9 Apr 2015
|
[ 07:44 bapt ] (Only the first 10 of 91 ports in this commit are shown above. )
Convert bsd.gnustep.mk to USES=gnustep
Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG
Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui
Merge deskutils/preferencepanes into deskutils/systempreferences
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Tue, 5 Aug 2014
|
[ 22:13 tijl ] (Only the first 10 of 119 ports in this commit are shown above. )
Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.
PR: 192342
Approved by: portmgr (implicit, bump unstaged ports)
|
|
Tue, 11 Feb 2014
|
[ 18:48 antoine ]
Stage support
|
|
Sun, 12 Jan 2014
|
[ 19:48 kwm ] (Only the first 10 of 15 ports in this commit are shown above. )
Update to 1.0.
Update Comment
Add LICENSE blob.
Stagify.
|
|
Wed, 11 Dec 2013
|
[ 18:28 bapt ] (Only the first 10 of 55 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in deskutils
|
|
Fri, 20 Sep 2013
|
[ 16:21 bapt ] (Only the first 10 of 271 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
deskutils)
|
|
Wed, 28 Aug 2013
|
[ 18:26 theraven (src committer) ] (Only the first 10 of 76 ports in this commit are shown above. )
Update to latest GNUstep core libraries.
Update dependent packages with more recent releases.
Remove old and bit-rotted ones.
Switch to using clang 3.3 and libobjc2 1.7 by default, so modern Objective-C
features work out of the box and remove a lot of configurable options for
sub-optimal (and, often, unsupported / deprecated upstream) configurations.
Take maintainership of GNUstep-related ports.
Several of the ports left in have scary warnings which mean that they are likely
broken in lots of cases. Future commits will fix them.
Approved by: bapt
|
|
Sun, 30 Dec 2012
|
[ 05:14 mezz ] (Only the first 10 of 14 ports in this commit are shown above. )
-Update devel/libical to 0.48.
-Update the header
-OPTIONSng
-Use the ltverhack to correct the shared library version (44 -> 0).
Bump the rest ports that depend on devel/libical because of shared library
version has been changed. Document the update in UPDATING.
PR: ports/173540
Remind by: Marcin Cieslak <saper@saper.info>
|
|
Sat, 13 Oct 2012
|
[ 13:39 dinoex ] (Only the first 10 of 174 ports in this commit are shown above. )
- cleanup comments
Feature safe: yes
|
|
Sun, 5 Aug 2012
|
[ 11:58 beat ]
- Mark as BROKEN:
Compiling file AppController.m ...
In file included from
GNUstep/System/Library/Headers/GNUstepBase/GSObjCRuntime.h:85,
from
GNUstep/System/Library/Headers/Foundation/NSObjCRuntime.h:95,
from GNUstep/System/Library/Headers/Foundation/NSObject.h:30,
from
GNUstep/System/Library/Headers/Foundation/FoundationErrors.h:29,
from GNUstep/System/Library/Headers/Foundation/Foundation.h:33,
from GNUstep/System/Library/Headers/AppKit/AppKit.h:40,
from AppController.m:3:
GNUstep/System/Library/Headers/ObjectiveC2/objc/runtime.h:297: error:
expected ')' before 'sel1'
gmake[3]: *** [obj/SimpleAgenda.obj/AppController.m.o] Error 1
Reported by: pointyhat
|
|
Tue, 26 Jun 2012
|
[ 06:29 dinoex ]
- reset MAINTAINER
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Fri, 20 May 2011
|
[ 04:40 dinoex ]
- update to 0.42
|
|
Sat, 16 Apr 2011
|
[ 05:10 dinoex ]
- use USE_GNUSTEP_CONFIGURE
this fixes build with base gcc
|
|
Fri, 18 Feb 2011
|
[ 16:52 dinoex ]
- update to 0.41.1
|
|
Fri, 4 Jun 2010
|
[ 13:49 dinoex ] (Only the first 10 of 96 ports in this commit are shown above. )
LICENSE GPLv2
|
|
Sun, 30 May 2010
|
[ 12:28 dinoex ] (Only the first 10 of 371 ports in this commit are shown above. )
- drop USE_GNUSTEP_PREFIX
|
|
Wed, 24 Mar 2010
|
[ 16:01 dinoex ]
- update to 0.41
|
|
Tue, 9 Mar 2010
|
[ 14:35 dinoex ]
- update to 0.40
|
|
Tue, 20 Oct 2009
|
[ 17:08 dinoex ]
- update to 0.39
|
|
Sun, 5 Jul 2009
|
[ 10:37 dinoex ] (Only the first 10 of 23 ports in this commit are shown above. )
- cleanup ADDITIONAL_LIB_DIRS
|
|
Thu, 4 Jun 2009
|
[ 18:34 dinoex ]
- fix buildwith custom LOCALBASE
Reported by: QAT
|
|
Thu, 19 Mar 2009
|
[ 17:48 dinoex ]
- update to 0.38
|
|
Fri, 16 Jan 2009
|
[ 13:25 dinoex ]
SimpleAgenda is a simple calendar and agenda application.
Based on libical, SimpleAgenda handles multiple local and distant
(through webcal) calendars.
Features
* multiples agendas
* monthly calendar, day view and summary
* create, resize and move appointments easily
* export individual appointments as files and to pasteboard
* changing rapidly
* open to suggestions and friendly with contributors !
LICENSE: GPL2 or later
WWW: http://wiki.gnustep.org/index.php/SimpleAgenda.app
|
Number of commits found: 43 |
As an Amazon Associate I earn from qualifying purchases.