| non port: deskutils/tpb/Makefile |
|
SVNWeb
|
Number of commits found: 39 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 4dd7a74 (Only the first 10 of 152 ports in this commit are shown above. )
deskutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Alex "lissyara" Keda <admin@lissyara.su>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andreas Kohn <andreas@syndrom23.de>
* Andrew Hsu <ahsu@users.sf.net>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Andrey Zakhvatov <andy@icc.surw.chel.su>
* Anton Berezin <tobez@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 4 Nov 2019
|
[ 22:20 zeising ]   (Only the first 10 of 102 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories d
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.
|
|
Sat, 22 Jul 2017
|
[ 08:04 eugen ]
- Fix volume control for TPB by correcting typing error:
replace wrong "dec.acpi_ibm.0.volume" with right "dev.acpi_ibm.0.volume"
- assign submitter as maintainer for this unmaintained port
- bump PORTREVISION.
PR: 220900
Submitted by: Dmitry Luhtionov
Approved by: az (mentor)
MFH: 2017Q3
|
|
Thu, 8 Dec 2016
|
[ 19:23 tijl ] (Only the first 10 of 122 ports in this commit are shown above. )
Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Tue, 1 Nov 2016
|
[ 09:04 amdmi3 ]
- Fix LICENSE
- Add LICENSE_FILE
- Switch to options helpers
- Add missing depends
- Regenerate patches
- Install example as EXAMPLES, not docs
|
|
Sun, 31 Jul 2016
|
[ 17:53 bapt ]
Remove build dependency on bison it is not needed
tested on FreeSD 9 and 10
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 27 May 2014
|
[ 11:17 amdmi3 ] (Only the first 10 of 17 ports in this commit are shown above. )
- Convert misc/xosd and dependent ports which need it (deskutils/xneur,
polish/ekg2, polish/gnugadu2, sysutils/lineak-xosdplugin) to USES=libtool, drop
.la files
- Since xosd shlib version has changed, bump all ports which depend on it
- Stagify deskutils/xneur
- Convert USE_BZIP2 to USES
- Use new LIB_DEPENDS syntax
Approved by: portmgr blanket
|
|
Fri, 20 Dec 2013
|
[ 21:48 pawel ]
- Fix build with clang
- Add LICENSE
- Define OPTIONS, use options subs and helpers
- Support staging
PR: ports/184889
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Wed, 11 Dec 2013
|
[ 18:28 bapt ] (Only the first 10 of 55 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in deskutils
|
|
Fri, 20 Sep 2013
|
[ 16:21 bapt ] (Only the first 10 of 271 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
deskutils)
|
|
Wed, 4 Sep 2013
|
[ 20:01 bsam ] (Only the first 10 of 63 ports in this commit are shown above. )
Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).
Co-authors: bapt, madpilot and bsam (me)
|
|
Tue, 3 Sep 2013
|
[ 08:49 bapt ] (Only the first 10 of 53 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Mon, 29 Apr 2013
|
[ 22:27 bapt ] (Only the first 10 of 54 ports in this commit are shown above. )
Convert a bunch of ports from WITHOUT_NLS -> ${PORT_OPTIONS:MNLS}
While here:
- trim headers
- convert to new options framework
|
|
Sat, 27 Apr 2013
|
[ 08:50 mva ] (Only the first 10 of 196 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: bapt, kwm
|
|
Fri, 26 Apr 2013
|
[ 10:44 ak ] (Only the first 10 of 277 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 4)
Approved by: portmgr (bapt)
|
|
Fri, 8 Mar 2013
|
[ 11:32 bapt ] (Only the first 10 of 209 ports in this commit are shown above. )
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Tue, 5 Jul 2011
|
[ 02:51 tabthorpe ] (Only the first 10 of 36 ports in this commit are shown above. )
- Reassign to the heap
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Thu, 12 Nov 2009
|
[ 23:02 markus ]
- Make tpb work if ACPI is not being used as requested by a user. In this case
nvram(4) and apm(4) are being used instead of acpi_ibm(4) to get the required
data.
- Bump PORTREVISION
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Mon, 5 Jan 2009
|
[ 17:27 pav ] (Only the first 10 of 56 ports in this commit are shown above. )
- Remove conditional checks relevant only on FreeBSD 5.x and older
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 6 Jun 2008
|
[ 13:18 edwin ] (Only the first 10 of 170 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Wed, 17 Oct 2007
|
[ 10:13 ade ] (Only the first 10 of 199 ports in this commit are shown above. )
Migration from bison 1.x to 2.x
PR: 117086
Tested by: -exp runs
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 4 May 2006
|
[ 21:41 edwin ] (Only the first 10 of 364 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with D
|
|
Tue, 7 Mar 2006
|
[ 08:28 ade ] (Only the first 10 of 633 ports in this commit are shown above. )
Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.
Discussed with: kris
Approved by: portmgr (implicit)
|
|
Sat, 7 Jan 2006
|
[ 06:59 edwin ]
deskutils/tpb to 0.6.4
Update to current release.
PR: ports/90000
Submitted by: Peter Thoenen <eol1@yahoo.com>
Approved by: maintainer timeout
|
|
Mon, 20 Jun 2005
|
[ 21:10 markus ]
- Fix plist
- Bump PORTREVISION
Submitted by: pointyhat via kris
|
|
Mon, 13 Jun 2005
|
[ 15:43 markus ]
- Add Bluetooth support
- Don't fail if wlan, bluetooth or thinklight sysctls are not present. They
are generated dynamically by the driver
- Bump PORTREVISION
|
|
Fri, 10 Jun 2005
|
[ 13:33 markus ]
- Fix writing the volume
- Fix some typos in pkg-descr [1]
- Fix an example in the manpage
- Bump PORTREVISION
Submitted by: brueffer [1]
|
|
Thu, 9 Jun 2005
|
[ 22:56 markus ]
Add tpb 0.6.3, An On-Screen-Display for hotkeys of IBM ThinkPads and the first
consumer of the updated acpi_ibm(4) driver:
With TPB it is possible to bind a program to the ThinkPad, Mail, Home and
Search button. TPB can also run a callback program on each state change with
the changed state and the new state as options. So it is possible to trigger
several actions on different events.
TPB has an on-screen display (OSD) to show volume, mute, brightness and some
other information. Furthermore TPB supports a software mixer, as the R series
ThinkPads have no hardware mixer to change the volume.
WWW: http://www.nongnu.org/tpb/
|
Number of commits found: 39 |
As an Amazon Associate I earn from qualifying purchases.