Number of commits found: 73

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix the build after the removal of objformat.

Reported by:    pointyhat via kris

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Add USE_GETTEXT to appease portlint.

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Remove REINPLACE commands that were rolled into gnomehack.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to 1.0.22.

Don't explicitly link against libc.  Bump PORTREVISION.

Update to 1.0.21.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).

The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.

Please report any unusual problems to gnome@FreeBSD.org.

Discussed with: marcus
Reviewed by:    marcus

- Use USE_LIBTOOL;
- install documentation into the correct location (bump PORTREVISION).

Add --disable-gtk-doc to prevent build and install problems when gtk-doc 0.9
is also installed.

PR:             36401
Reported by:    many
Approved by:    sobomax

GC tons of useless msgfmt:... in BUILD_DEPENDS, when libintl already in
LIB_DEPENDS.

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

- Update to 1.0.20;
- teach it to play nicely with corresponding GNOME2 component.

Submitted by:   marcus

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

Update to 1.0.19.    

Update to 1.0.18.    

Update to 1.0.17.    

Update to 1.0.15.    

Update to 1.0.10.    

Update to 1.0.9.    

Update to 1.0.9.    

Update to 1.0.8.    

Update to 1.0.7    

Update to 1.0.6. Due to incompatibilities between our USE_LIBTOOL hack and  
newest autocrap used to generate distribution I had to remove USE_LIBTOOL   and
use homemade patch to get rid of those .la files.    

Add pkgconfig support to most of the core of GNOME 1.4 and GTK+/GLIB 1.2   to
make transitioning to GNOME/GTK+/GLIB a little easier.    

Update to 1.0.4    

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

Update to GNOME 1.4 -- massive changes all around, for the sake of   CVS repo
bloat, I'll only list the updates.    

-pthread --> ${PTHREAD_LIBS}   -D_THREAD_SAFE --> ${PTHREAD_CFLAGS}    

Update to 0.37    

Update to 0.36    

Update to 0.35    

Update to 0.33    

Update to 0.31    

Update to 0.30 -- breaks a few things in the tree, but its   definitely needed
for the upcoming GNOME 1.4    

Chase new print/gnomeprint shlib version    

Update to 0.23    

Update to 0.22    

Update to 0.20 -- lots of API changes    

Implement USE_GNOME, part 1.    

Chase new gnomeprint    

Update to 0.18    

Re-sobomize to use pre-patch instead of post-extract    

Update to 0.16    

Add a RUN_DEPENDS on sysutils/gnomecontrolcenter.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I  
just cun'n'pasted the name from Satoshi's commit message without checking   it. 
  

Second round of INSTALL_SHLIBS=yes fixes.    

Update to 0.15, now with OAF support (gnorba is going away)    

Updates for new shared library versions in GNOME 1.2    

Number of commits found: 73

9 vulnerabilities affecting 109 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-05-21 04:12:47