| non port: devel/eris/Makefile |
|
SVNWeb
|
Number of commits found: 54 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Fri, 23 Mar 2018
|
[ 09:33 amdmi3 ]
- Add LICENSE
- Update WWW
Approved by: portmgr blanket
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Sun, 2 Apr 2017
|
[ 09:42 bapt ] (Only the first 10 of 13 ports in this commit are shown above. )
Chase a bunch of failures after libsigc++20 update
New libsigc++20 requires c++11 (it exposes c++11) so explicitly use -std=c++11
where needed.
Mark as broken a bunch of ports which are not c++11 compatible
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Fri, 9 Sep 2016
|
[ 19:42 amdmi3 ] (Only the first 10 of 100 ports in this commit are shown above. )
Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.
Change summary:
- Always do verbose builds for cmake, ninja and GNU configure (the
latter includes check if --disable-silent-rules is actually supported
by the configure script; there are isolated cases when it's not true) (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Thu, 14 Aug 2014
|
[ 05:43 amdmi3 ]
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
|
Sun, 23 Mar 2014
|
[ 09:45 oliver ] (Only the first 10 of 16 ports in this commit are shown above. )
switch from GCC to Clang
bump PORTREVISION
|
|
Sun, 16 Mar 2014
|
[ 22:33 gerald ]
Now that the default version of GCC in the Ports Collection (per
lang/gcc and Mk/bsd.default-versions.mk) is GCC 4.7, replace
USE_GCC=4.7+ by USE_GCC=yes.
Approved by: portmgr (mat)
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
|
Wed, 5 Mar 2014
|
[ 08:27 oliver ]
update devel/eris to 1.3.23
|
|
Fri, 28 Feb 2014
|
[ 07:32 oliver ]
update mercator to 0.3.3
|
|
Thu, 21 Nov 2013
|
[ 08:19 oliver ]
update devel/atlas-devel to 0.6.3 which now requires a C++-11 compiler
new .so version changes in affected ports
change some ports to use USE_GCC=4.7+ (tested with 4.7 and 4.8) as this is
needed for dependencies to devel/atlas-devel
finally fix the compilation error in games/ember for at least FreeBSD 9
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 17:03 bapt ] (Only the first 10 of 379 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)
|
|
Wed, 18 Sep 2013
|
[ 07:04 oliver ]
set USE_GCC=yes as devel/mercator forces the use of GCC and because of that,
a GCC compiler is needed for linking (only for linking with libmercator.so)
here as well.
|
|
Tue, 23 Apr 2013
|
[ 10:13 bapt ] (Only the first 10 of 97 ports in this commit are shown above. )
Convert devel to USES=pkgconfig
|
|
Tue, 19 Mar 2013
|
[ 13:04 eadler ] (Only the first 10 of 218 ports in this commit are shown above. )
This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.
If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.
PR: ports/177081
Reviewed by: bapt
Approved by: portmgr (miwi)
|
|
Fri, 8 Mar 2013
|
[ 10:51 kwm ] (Only the first 10 of 417 ports in this commit are shown above. )
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
|
|
Sat, 19 Jan 2013
|
[ 10:09 oliver ] (Only the first 10 of 23 ports in this commit are shown above. )
update of the worldfordge suite
devel/eris: 1.3.21
devel/mercator: 0.3.2
devel/varconf: 1.0.0
math/wfmath: 1.0.1
net/cyphesis: 0.6.0
net/skstream: 0.3.9
games/ember: 0.7.0
|
|
Fri, 9 Dec 2011
|
[ 10:23 oliver ]
update varconf to 0.6.7
update eris to 1.3.19
update ember to 0.6.2
Feature safe: yes
|
|
Fri, 29 Apr 2011
|
[ 05:56 oliver ] (Only the first 10 of 18 ports in this commit are shown above. )
big WorldForge update:
update eris to 1.3.18
update wfmath to 0.3.11
update skstream to 0.3.8
update mercator to 0.3.0
update ember to 0.6.1
update cyphesis to 0.5.26
|
|
Thu, 20 Jan 2011
|
[ 11:45 oliver ]
update devel/mercator to 0.2.9
Feature safe: yes
|
|
Thu, 21 Oct 2010
|
[ 11:13 oliver ]
update devel/eris to 1.3.16
|
|
Tue, 7 Sep 2010
|
[ 15:17 oliver ]
update devel/mercator to 0.2.8
update net/skstream to 0.3.7
bump PORTREVISION on affected ports
|
|
Wed, 9 Jun 2010
|
[ 05:22 oliver ]
update eris to 1.3.15
|
|
Wed, 2 Dec 2009
|
[ 14:49 oliver ]
update devel/atlas-devel to 0.6.2
|
|
Tue, 25 Aug 2009
|
[ 13:08 erwin ]
Fix sourceforge
Submitted by: pointyhat
|
|
Sun, 5 Apr 2009
|
[ 18:12 oliver ]
update eris to 1.3.14
|
|
Thu, 28 Feb 2008
|
[ 17:26 oliver ]
update eris to 1.3.13
|
|
Wed, 19 Sep 2007
|
[ 13:50 oliver ]
do not force the usage of gcc 3.4, the ports are now gcc 4 ready
Bump PORTREVISION
|
|
Tue, 30 Jan 2007
|
[ 05:03 oliver ]
update to 1.3.12
|
|
Wed, 8 Nov 2006
|
[ 18:55 oliver ]
update to 0.3.5
|
|
Mon, 11 Sep 2006
|
[ 14:20 oliver ]
update to 1.3.11
|
|
Mon, 21 Aug 2006
|
[ 14:57 oliver ]
Do not update eris to .11! - moving back to 1.3.10 - only chase wfmath update
I hope that version number going backwards w/o updating PORTEPOCH is ok here
because of the small timeframe
|
[ 14:54 oliver ]
update wfmath to 0.3.5
|
|
Sun, 23 Apr 2006
|
[ 11:55 oliver ]
update to 1.3.10
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 25 Oct 2005
|
[ 14:07 oliver ]
update to 1.3.9
|
|
Thu, 20 Oct 2005
|
[ 13:50 oliver ]
update Atlas-C++ to 0.5.0.r(c)1
|
|
Sun, 9 Oct 2005
|
[ 22:38 oliver ]
update to 1.3.8
|
|
Tue, 4 Oct 2005
|
[ 15:51 oliver ]
fix build on FreeBSD 4
|
|
Mon, 3 Oct 2005
|
[ 17:00 oliver ]
update to 1.3.7
|
|
Fri, 30 Sep 2005
|
[ 13:07 oliver ]
take maintainership
Approved by: maintainer
|
|
Wed, 28 Sep 2005
|
[ 14:59 oliver ]
update to 1.2.2
Approved by: maintainer
|
|
Sat, 7 May 2005
|
[ 11:01 oliver ]
update Atlas-C++ to 0.4.95
|
|
Wed, 9 Feb 2005
|
[ 23:04 pav ]
Eris, the WorldForge client entity library is designed to simplify client
development (and avoid duplicating effort) by providing a common framework to
deal with server communications.
PR: ports/77064
Submitted by: Jan Rochel <jannisan@t-online.de>
|
Number of commits found: 54 |
As an Amazon Associate I earn from qualifying purchases.