| non port: devel/fuel/Makefile |
|
SVNWeb
|
Number of commits found: 21 |
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias)  ]    ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above.  )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Sat, 16 Mar 2019
|
[ 15:22 tcberner ]
devel/fuel: remove QT4/QT5 options (Qt4 deprecation)
Approved by: portmgr (implicit)
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 26 Dec 2018
|
[ 20:31 linimon ]
This port requires USES=compiler:c++11-lang when compiled with Qt5
on GCC-based architectures.
PR: 234343
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
|
|
Sun, 16 Dec 2018
|
[ 14:49 tcberner ] (Only the first 10 of 116 ports in this commit are shown above. )
Update Qt5 to 5.12.0
http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/
- This breaks support for libressl again. Patches are welcome.
PR: 233705
Exp-run by: antoine
|
|
Sun, 2 Dec 2018
|
[ 15:41 rene ] (Only the first 10 of 464 ports in this commit are shown above. )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Fri, 31 Mar 2017
|
[ 01:48 rezny ]
Fix fetch, update to 1.0.1, and add option for Qt 4 or 5 (default).
PR: 217824
Reviewed by: mat
Approved by: swills (mentor), maintainer (timeout)
Differential Revision: https://reviews.freebsd.org/D10199
|
|
Fri, 3 Mar 2017
|
[ 16:00 mat ] (Only the first 10 of 185 ports in this commit are shown above. )
Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.
In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed. The remaining must not
be of use to anyone.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 14 Sep 2016
|
[ 15:59 mat ] (Only the first 10 of 353 ports in this commit are shown above. )
GOOGLE_CODE has gone away.
- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN
Some ports have a local mirror configured but for security reasons, it
is not considered upstream.
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 25 Nov 2013
|
[ 18:01 makc ]
- Convert to USES=qmake
- Add state support
- Convert LIB_DEPENDS to new style, adjust USE_QT4 components, etc.
Approved by: portmgr (blanket approval)
|
|
Fri, 20 Sep 2013
|
[ 17:04 bapt ] (Only the first 10 of 482 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)
|
|
Sat, 31 Aug 2013
|
[ 20:23 rm ]
- update maintainer's email address
while here:
- trim Makefile header
- remove indefinite article in COMMENT
- whitespace fixes
Requested by: Hakisho Nukama <nukama@gmail.com> (maintainer, via email)
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Tue, 15 May 2012
|
[ 10:49 makc ]
Add new port devel/fuel:
Fuel is a cross-platform GUI front-end to the excellent fossil SCM tool,
implemented in Qt.
WWW: https://code.google.com/p/fuel-scm/
PR: ports/167871
Submitted by: Hakisho Nukama <nukama at gmail.com>
|
Number of commits found: 21 |
As an Amazon Associate I earn from qualifying purchases.