Number of commits found: 207 (showing only 100 on this page)

1 | 2 | 3  »  

Remove unnecessary @dir from PLIST

Reported by:	mat
Sponsored by:	Rubicon Communications, LLC (Netgate)

Fix PLIST with GITWEB option enabled

PR:		227652
Reported by:	rozhuk.im@gmail.com and w.schwarzenfeld@utanet.at
Sponsored by:	Rubicon Communications, LLC (Netgate)

Install a gitweb.conf initial file and update pkg-message to make it easier
to configure it

PR:		218229
Submitted by:	Zsolt Udvari <uzsolt@uzsolt.hu>
Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.17.0

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.16.3

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.16.2

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.16.1

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.16.0

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.15.1

Sponsored by:	Rubicon communications, LLC (Netgate)

Update devel/git to 2.15.0

Sponsored by:	Rubicon Communiucations, LLC (Netgate)

Update devel/git to 2.14.3

Sponsored by:	Rubicon Communications, LLC (Netgate)

Fix packaging when HTMLDOCS is on.

Pointy hat to:	garga

Fix packaging WITH=HTMLDOCS.

Pointy hat:	garga
Sponsored by:	Absolight

Update devel/git to 2.14.1

This version fixes a security issue:

A "ssh://..." URL can result in a "ssh" command line with a
hostname that begins with a dash "-", which would cause the "ssh"
command to instead (mis)treat it as an option.  This is now
prevented by forbidding such a hostname (which will not be
necessary in the real world).

MFH:		2017Q3
Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.13.4

- Add diff-highlight back to package when CONTRIB option is set
- While here, remove unnecessary lines from pkg-plist
- Bump PORTREVISION

PR:		220804
Submitted by:	martin@sugioarto.com
Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.13.3

Sponsored by:	Rubicon Communications, LLC (Netgate)

Update devel/git to 2.13.2

Sponsored by:	Rubicon Communications (Netgate)

Update devel/git to 2.13.1

Sponsored by:	Rubicon Communications (Netgate)

devel/git: Update to 2.13.0

MFH:		2017Q2
Security:	CVE-2017-8386
Sponsored by:	Rubicon Communications (Netgate)

- Update devel/git to 2.12.1
- Replace git-send-email patch by a version that works [1]

PR:		214335 [1]
Submitted by:	OlivierW <olivierw1+bugzilla-freebsd@hotmail.com> [1]
MFH:		2017Q1
Sponsored by:	Rubicon Communications (Netgate)

Fix devel/git PLIST when HTMLDOCS is on

Reported by:	dankm on IRC

Update devel/git to 2.11.1

Sponsored by:	Rubicon Communications (Netgate)

When CONTRIB option is ON a good number of extra dependencies is added
(asciidoc, docbook-xml) but they are only used to build git-subtree
manpage and html doc.

Created a new option SUBTREE to make it possible to install all CONTRIB
code except git-subtree and remove extra dependencies from CONTRIB option

PR:		203606
Submitted by:	phk@

Revert part of r427504

Helpers used to access http(s) and ftp(s) were not being built due to an error
on libcurl, then they ended up showing as PLIST errors.

PR:		213971

- Fix build with PERL and non-default LOCALBASE [1]
- Fix build with DEVELOPER=yes [2]
- Do not install ZSH completion [3]
	- ZSH installs a better version itself
- Fix PLIST
- Bump PORTREVISION

PR:		213494 [1]
		214009 [2]
		214870 [3] (based on)
Submitted by:	John Hein <z7dr6ut7gs@snkmail.com> [1] [3]
		Michael Zuo <muh.muhten@gmail.com>
Sponsored by:	Rubicon Communications (Netgate)

Update to 2.11.0.

Changes:
https://raw.githubusercontent.com/git/git/master/Documentation/RelNotes/2.11.0.txt

PR:		214954
Approved by:	maintainer (garga)

Update to 2.10.2.

PR:		214790
Approved by:	maintainer (garga)

Split targets so that they use options helpers when possible.
Always install the completions to some useful place. [1]
  if CONTRIB is on, symlink them in the right place.
  if CONTRIB is off, copy the anyway.

PR:		212303
Submitted by:	mat
Reported by:	Aleksander Alekseev [1]
Approved by:	maintainer timeout
Sponsored by:	Absolight

devel/git: Do not install elisp files for XEmacs

- XEmacs is no longer in the ports tree, so no need to install these files.
- Remove empty post-stage target.
- Bump PORTREVISION.

Approved by:	garga (maintainer) swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D8247

Fix plist when NLS option is unset.

Update to 2.10.1.

Hook up to the test framework.

Sort the plist the same way make makeplist does, so that next updates
are easier to work on.

PR:		213417
Submitted by:	mat
Approved by:	maintainer
Sponsored by:	Absolight

Update devel/git to 2.9.2

Sponsored by:	Rubicon Communications (Netgate)

Update devel/git to 2.9.0

Sponsored by:	Rubicon Communications (Netgate)

Update devel/git to 2.8.4

Sponsored by:	Rubicon Communications (Netgate)

- Update devel/git to 2.8.1
- Remove ETCSHELLS option and use @shell in pkg-plist [1]

Submitted by:	bapt [1]
Sponsored by:	Rubicon Communications (Netgate)
Differential Revision:	https://reviews.freebsd.org/D5899 [1]

Update devel/git to 2.7.4

MFH:		2016Q1
Security:	CVE-2016-2324
Sponsored by:	Rubicon Communications (Netgate)

Fix plist with NLS on after r409422.

Update devel/git to 2.7.2

Lighten up the Perl dependencies.

git uses Perl for two things: Perl hooks into git, and the
git-send-email(1) script.

The Perl hooks only use p5-Error. The other modules dependencies,
p5-Authen-SASL and p5-Net-SMTP-SSL (which bring in a number of other
perl module dependencies) are only required for git-send-email(1).

This commit adds a SEND_EMAIL option, defaulted to on, that auto-enables
the PERL option and installs the git-send-email(1) script with the
extra perl modules.

With the PERL option on and SEND_EMAIL off, only the p5-Error module
is required.

No PORTREVISION bump as the default dependencies and plist haven't changed.

PR:		206901
Approved by:	garga (maintainer)
Differential Revision:	https://reviews.freebsd.org/D5179

Update devel/git to 2.7.0

Update devel/git to 2.6.4

Update devel/git to 2.6.3

Update devel/git to 2.6.2

PR:		203878
Submitted by:	Wendell Borges <wendell@bsd.com.br>

Update devel/git to 2.6.1

MFH:		2015Q4

- Update devel/git to 2.6.0
- Use DISTVERSION instead of PORTVERSION to make it easy to test new version
  RCs when they are available

Update devel/git to 2.5.3

Update to 2.5.2

- Update to 2.5.1
- Fix build with NO_PERL set backporting a commit from git repo (82aec45)
- Add git-submodile, git-am and git-request-pull to the list of commands
  that doesn't work without perl

- Update git to 2.4.6
- Regenerate patches with make makepatch to silence portlint
- Change CONFLICTS to CONFLICTS_INSTALL

Update to 2.4.5

Update to 2.4.2

Update to 2.4.1

Update to 2.4.0

PR:		199881 (based on)
Submitted by:	pi@

Update to 2.3.7

Update to 2.3.6

Update to 2.3.5

Update to 2.3.4

Update to 2.3.3

Update to 2.3.2

- Update to 2.3.1
- Add upcoming git-lite to the list of CONFLICTS
- Modernize Makefile

Update to 2.3.0

Update to 2.2.2

Fix PLIST and bump PORTREVISION

PR:		196330
Submitted by:	mp39590@gmail.com

Upgrade to 2.2.1.

- Add empty directory to plist

PR:		195570
Submitted by:	ohauer
Approved by:	maintainer timeout (wxs, 14 days)

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

(Only the first 15 lines of the commit message are shown above )

Update to 2.1.2.

Cleanup plist to remove @dirrm.

Update to 2.1.0.

Update to 2.0.2.

Update to 2.0.1.

Fix plist.

PR:		190993
Submitted by:	Vikash Badal <vikashb@where-ever.za.net>

Update to 2.0.0

Update to 1.9.3.

Update to 1.9.2.
Now back to grabbing distfiles from kernel.org mirrors as google code is
no longer updated.
Fix an issue with packlist when using PERL. [1]

PR:		[1]: ports/188677
Submitted by:	Bartek Rutkowski <ports@robakdesign.com>
		Horia Racoviceanu (private mail)

Update to 1.9.0. [1]
Support staging and general cleanup.

PR:		[2]: ports/186696
Submitted by:	[1]: Dan McGregor (private mail)
		[2]: tijl@

Update to 1.8.5.4.

Update to 1.8.5.2.

Update to 1.8.4.3.

Update to 1.8.4.2.

Update to 1.8.4.1.

Among other things, this fixes git rebase.

https://raw.github.com/git/git/master/Documentation/RelNotes/1.8.4.1.txt

PR:		ports/183027
Submitted by:	olgeni@

- Fix plist (remove duplicate file entry and nonexisting dirs)

PR:		182858
Submitted by:	myself
Approved by:	wxs (maintainer)

Update to 1.8.4

Changes: https://raw.github.com/git/git/master/Documentation/RelNotes/1.8.4.txt

Update to 1.8.3.4.

While here, fix missing RelNotes from last couple of updates.

Update to 1.8.3.1
Properly install git-subtree [1]

PR:		[1] ports/178797
Submitted by:	amdmi3@

Update to 1.8.2.3.

Changes:
https://raw.github.com/git/git/master/Documentation/RelNotes/1.8.2.3.txt

Update to 1.8.2.2

Changes:
https://raw.github.com/git/git/master/Documentation/RelNotes/1.8.2.2.txt

Update to 1.8.2.1.

Feature safe:	yes

Update to 1.8.2.

Update to 1.8.1.5.

Update to 1.8.1.3.

Changes:
https://raw.github.com/git/git/master/Documentation/RelNotes/1.8.1.3.txt

Update to 1.8.1.2.

Update to 1.8.1.1.

Update to 1.8.1.

Update to 1.8.0.3.

Update to 1.8.0.2.

Update to 1.8.0.1

Feature safe:	yes

Update to 1.8.0.

Something to be aware of from the release notes:

<snip>
In the next major release (not *this* one), we will change the
behavior of the "git push" command.

When "git push [$there]" does not say what to push, we have used the
traditional "matching" semantics so far (all your branches were sent
to the remote as long as there already are branches of the same name
over there).  We will use the "simple" semantics that pushes the
current branch to the branch with the same name, only when the current
branch is set to integrate with that remote branch.  There is a user
preference configuration variable "push.default" to change this, and
"git push" will warn about the upcoming change until you set this
variable in this release.

"git branch --set-upstream" is deprecated and may be removed in a
relatively distant future.  "git branch [-u|--set-upstream-to]" has
been introduced with a saner order of arguments.
</snip>

Feature safe:	yes

Update to 1.7.12.4

Feature safe:	yes

Update to 1.7.12.3.

Stop using LIBMD_SHA1, it's been useless for a while now. If we want to not
use SHA1 from OpenSSL I can put BLK_SHA1 in, but since nobody has complained
that we silently fell back to OpenSSL I'm going to stick with that for now.

Pass NO_GETTEXT in MAKE_ARGS instead of MAKE_ENV. This actually works
now[1].

PR:		[1]: ports/171939
Submitted by:	ohauer@
Feature safe:	yes

Number of commits found: 207 (showing only 100 on this page)

1 | 2 | 3  »  

9 vulnerabilities affecting 108 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-05-20 14:14:58