| non port: devel/hs-uuagc-bootstrap/Makefile |
|
SVNWeb
|
Number of commits found: 22 |
|
Sun, 6 Jan 2019
|
[ 13:22 arrowd  ]  
Use proper format for EXPIRATION_DATE.
Reported by: FreshPorts
Approved by: tcberner (mentor)
|
[ 12:18 arrowd ] (Only the first 10 of 807 ports in this commit are shown above.  )
lang/ghc: Update to 8.6.3 and bump PORTREVISION's of all Haskell ports.
As usual, it is recommended to rebuild or reinstall all the
dependent ports and the lang/ghc port itself in one of the following
ways:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
In case of pkg(8), it is probably safer to remove all the GHC-dependent
packages along with GHC and reinstall everything from scratch. For
example:
# pkg query "%ro" ghc > ghc-pkgs.txt
# pkg delete -y lang/ghc
# pkg install -y `cat ghc-pkgs.txt`
During update some hs-* ports got two PORTREVISION bumps in a row. Other ports
got a PORTVERSION update together with one PORTREVISION bump. This is caused
by bulk-bumping PORTREVISION of all hs-* ports. There are a lot of them updated,
so figuring out which ones require a bump and which are not is too tedious.
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D18707
|
|
Sat, 30 Jun 2018
|
[ 09:58 arrowd ] (Only the first 10 of 563 ports in this commit are shown above. )
lang/ghc: Update to 8.4.3 and bump PORTREVISION's of all Haskell ports.
As usual, it is recommended to rebuild or reinstall all the
dependent ports and the lang/ghc port itself in one of the following
ways:
# portmaster -w -r ghc
or
# portupgrade -fr lang/ghc
In case of pkg(8), it is probably safer to remove all the GHC-dependent
packages along with GHC and reinstall everything from scratch. For
example:
# pkg query "%ro" ghc > ghc-pkgs.txt
# pkg delete -y lang/ghc
In ghc-pkgs.txt, check and remove all the packages that have been moved
on the update, then use this command:
# pkg install -y `cat ghc-pkgs.txt`
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D16038
|
|
Fri, 25 May 2018
|
[ 21:44 tcberner ] (Only the first 10 of 966 ports in this commit are shown above. )
Update lang/ghc 8.4.2 and the hs-* ports the newer versions
* Update lang/ghc to 8.4.2
* Update the boostrap compiler to 8.4.1
* Update the many hs-* ports
* Bump the rest
Thanks a lot to arrowd for doing all the heavy lifting :)
PR: 227968
Exp-run by: antoine
Submitted by: arrowd
Differential Revision: https://reviews.freebsd.org/D15005
|
|
Sat, 10 Feb 2018
|
[ 08:03 tcberner ] (Only the first 10 of 560 ports in this commit are shown above. )
Switch C compiler used to compile GHC to base Clang.
This removes build dependency on gcc and runtime dependency on gcc's runtime
libraries.
Big thanks to Gleb for working on this.
PR: 225185
Submitted by: Gleb Popov <6yearold@gmail.com>
Exp-run by: antoine
Reviewed by: pgj
Differential Revision: https://reviews.freebsd.org/D12043
|
|
Tue, 8 Aug 2017
|
[ 17:21 tcberner ] (Only the first 10 of 1370 ports in this commit are shown above. )
- Update The Glorious Glasgow Haskell Compiler to version 8.0.2
- Simplified port by only suporting GCC, and creating a build.mk file
- Update Pandoc to 1.19.2.1
- Update git-annex to 6.20170520
- Update Darcs to 2.12.5
- Update Gtk2Hs to 0.13.2.2
- Update Agda to 2.5.2
Please note that port revisions for all the Haskell ports without version
changes are bumped.
See the UPDATING file for instructions.
New ports (63):
(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 20 Aug 2015
|
[ 23:02 pgj ] (Only the first 10 of 1153 ports in this commit are shown above. )
- Update The Glorious Glasgow Haskell Compiler to version 7.10.2
- Include a patch for addressing timer issues [1]
- Add support for building both GHC and Haskell ports with Clang, either from
ports or the base system
- Discontinue supporting Haskell Platform, use Stackage instead as a
reference
- Drop support for FreeBSD 8.x, optimize bootstrap compiler tarballs
- Update Gtk2Hs to version 0.13 [2]
- Update Pandoc to version 1.15.0.6
- Update git-annex to version 5.20150727
- Update Darcs to 2.10 [3]
- Unbreak wxHaskell ports
Please note that port revisions for all the Haskell ports without version
changes are bumped. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Sun, 10 Aug 2014
|
[ 22:34 pgj ] (Only the first 10 of 1166 ports in this commit are shown above. )
- Update The Glorious Glasgow Haskell Compiler to version 7.8.3
- Update Haskell Platform to version 2014.2.0.0
- Update Yesod Platform to version 1.2.13
- Update Gtk2Hs to version 0.12.5
- Update Pandoc to version 1.12.4.2
- Update git-annex to version 5.20140717
- Unbreak wxHaskell ports
Please note that port revisions for all the Haskell ports without version
changes are bumped.
New ports (69):
databases/hs-esqueleto: Type-safe EDSL for SQL queries on persistent backends
devel/hs-Glob: Globbing library (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 29 Mar 2014
|
[ 00:52 pgj ] (Only the first 10 of 402 ports in this commit are shown above. )
- Reroll and update bootstrap Haskell compilers to GHC 7.6.3 on 8.x and
9.x in order to prevent run-time breakage after the recent changes in
libiconv
- Bump port revision for lang/ghc and all dependents, as a consequence
Obtained from: FreeBSD Haskell
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
|
Thu, 9 Jan 2014
|
[ 21:32 pgj ] (Only the first 10 of 410 ports in this commit are shown above. )
- Stagify lang/ghc and all the Haskell Cabal ports
- Update HACKAGE_SITE to follow changes in upstream
- MAKE_ENV now sets LC_ALL and DESTDIR for Haskell Cabal ports
- Further minor cosmetical changes: replace USE_GMAKE with USES, get rid of
${DO_NADA}, some refactoring
Obtained from: FreeBSD Haskell
|
[ 21:29 pgj ] (Only the first 10 of 406 ports in this commit are shown above. )
- Fix a run-time problem with lang/ghc on FreeBSD 10.0 and later, caused by
the iconv changes (basically GHCi was rendered unusable)
- Fix build for x11-toolkits/hs-wxc, while here
- Bump port revision for all Haskell Cabal ports as they have to be rebuilt
PR: ports/184806
Reported by: many
Obtained from: FreeBSD Haskell
MFH: 2014Q1
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 17:04 bapt ] (Only the first 10 of 482 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)
|
|
Tue, 4 Jun 2013
|
[ 18:53 pgj ] (Only the first 10 of 625 ports in this commit are shown above. )
- Update The Glorious Glasgow Haskell Compiler to version 7.6.3
- Update Haskell Platform to version 2013.2.0.0
Please note that port revisions for all the Haskell ports without version
changes are bumped.
Some highlights of the update:
- Fix PDF generation for pandoc [1]
- From now on, PREFIX/{lib,share,share/doc}/cabal/ghc-GHC_VERSION are used for
hs- ports (Cabal packages) as prefixes to avoid problems when upgrading with
portmaster(8) [2]
- Experimental support for LLVM-based code generation (disabled by default)
- Many simplifications, refactoring in bsd.cabal.mk
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 29 Mar 2013
|
[ 22:43 pgj ] (Only the first 10 of 339 ports in this commit are shown above. )
- Update Haskell ports from the development repository
- Avoid self-dependency for print/hs-hscolour (when HSCOLOUR is set)
Contributed by: ashish
New ports (5):
devel/hs-geniplate 0.6.0.3
devel/hs-uuid 1.2.9
net/hs-maccatcher 2.1.5
net/hs-publicsuffixlist 0.0.3
textproc/hs-regex-tdfa 1.1.8
Removed ports (1):
math/hs-Agda-executable 2.3.0.1_3 (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 5 Feb 2013
|
[ 22:26 pgj ] (Only the first 10 of 595 ports in this commit are shown above. )
- Fix breakage in the DYNAMIC-enabled ports triggered by the recent
devel/libffi update
- Enable multithreaded build for lang/ghc (i.e. mark MAKE_JOBS_SAFE)
Please note that port revision for all the Haskell ports without version
changes are bumped.
New ports (20):
devel/hs-MonadRandom 0.1.8
devel/hs-base64-conduit 0.5.1
devel/hs-bifunctors 3.2
devel/hs-either 3.1
devel/hs-errors 1.3.1
devel/hs-generic-deriving 1.4.0 (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 20 Dec 2012
|
[ 02:23 pgj ] (Only the first 10 of 1010 ports in this commit are shown above. )
- Update The Glorious Glasgow Haskell Compiler to version 7.4.2
- Update Haskell Platform to version 2012.4.0.0
- Update Gtk2Hs to 0.12.4
- Transfer maintainership of math/hs-math-functions to haskell@ [1]
Please note that port revisions for all the Haskell ports without version
changes are bumped.
Some further highlights of the update:
- Trim Makefile headers
- Enable dynamic libraries and dynamic linking by default
- Enable bootstrapping by versions of GHC and HsColour already installed
- Use GCC and binutils from ports
New ports (32): (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 3 Aug 2012
|
[ 02:30 pgj ] (Only the first 10 of 286 ports in this commit are shown above. )
- Teach the Haskell Cabal ports to use the new options framework
- Remove some cruft
Obtained from: FreeBSD Haskell
|
|
Sun, 3 Jun 2012
|
[ 22:04 pgj ]
- Chase GHC update
Obtained from: FreeBSD Haskell
|
|
Mon, 13 Feb 2012
|
[ 02:27 pgj ]
UUAG is the Utrecht University Attribute Grammar system. It generates Haskell
files from an attribute grammar specification.
It is a preprocessor for Haskell which makes it easy to write catamorphisms
(that is, functions that do to any datatype what foldr does to lists).
You can define tree walks using the intuitive concepts of inherited and
synthesized attributes, while keeping the full expressive power of Haskell.
WWW: http://www.cs.uu.nl/wiki/HUT/AttributeGrammarSystem
Obtained from: FreeBSD Haskell
|
Number of commits found: 22 |
As an Amazon Associate I earn from qualifying purchases.