| non port: devel/libftdi1/Makefile |
|
SVNWeb
|
Number of commits found: 38 |
|
Wed, 7 Apr 2021
|
[ 08:09 mat (Mathieu Arnold) ]  cf118cc (Only the first 10 of 8873 ports in this commit are shown above.  )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 mat (Mathieu Arnold) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 8 Feb 2021
|
[ 16:35 amdmi3 ]  
- Update MASTER_SITES to https
- Switch to options helpers, CMAKE_BOOL, PORTEXAMPLES
- Install examples into designated EXAMPLESDIR, instead of bin/
- Fix inability to enable PYTHON and DOCS at the same time
PR: 252922
Submitted by: amdmi3
Approved by: maintainer timeout (bsam, 2 weeks)
|
|
Tue, 21 Jul 2020
|
[ 22:01 bsam ]
devel/libftdi1: fix paths when FTDIPP is set
Incorporate an upstream fix:
http://developer.intra2net.com/mailarchive/html/libftdi-git/2020/msg00024.html
This should fix devel/libsigrok build.
PR: 248043
Submitted by: manu
|
|
Sun, 12 Jul 2020
|
[ 13:02 bsam ]
devel/libftdi1: Update to version 1.5 and:
- mark dual licensed;
- regenerate patches;
- pet portlint (shuffle some Makefile lines).
New in 1.5 - 2020-07-07
-----------------------
* Implement tc[io]flush methods & deprecate broken purge_buffers methods
Please check your code for ftdi_usb_purge_rx_buffer(),
ftdi_usb_purge_tx_buffer() and ftdi_usb_purge_buffers()
and migrate to the new ftdi_tc[io]flush() methods.
Old code will continue to function, but you'll get (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 17 Jun 2020
|
[ 18:17 sunpoet ] (Only the first 10 of 84 ports in this commit are shown above. )
Move devel/swig30 to devel/swig and update to 4.0.1
- Do not silence installation message
- Update dependent ports:
- Fix build with swig 4.0.1
- Update *_DEPENDS
- Remove BINARY_ALIAS
Changes: http://www.swig.org/news.php
PR: 246613
Exp-run by: antoine
|
|
Wed, 19 Feb 2020
|
[ 21:33 antoine ]
libftdi1 works fine with python 3
With hat: portmgr
|
|
Wed, 11 Dec 2019
|
[ 17:53 jbeich ] (Only the first 10 of 417 ports in this commit are shown above. )
devel/boost-*: update to 1.72.0
Changes: http://www.boost.org/users/history/version_1_72_0.html
PR: 241449
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D22136
|
|
Mon, 19 Aug 2019
|
[ 15:35 jbeich ] (Only the first 10 of 412 ports in this commit are shown above. )
devel/boost-*: update to 1.71.0
Changes: http://www.boost.org/users/history/version_1_71_0.html
PR: 238827
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D20774
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Fri, 12 Apr 2019
|
[ 06:36 jbeich ] (Only the first 10 of 392 ports in this commit are shown above. )
devel/boost-*: update to 1.70.0
Changes: http://www.boost.org/users/history/version_1_70_0.html
PR: 235956
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D19303
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
[ 00:15 jbeich ] (Only the first 10 of 415 ports in this commit are shown above. )
devel/boost-*: update to 1.69.0
Changes: http://www.boost.org/users/history/version_1_69_0.html
PR: 232525
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17645
|
|
Thu, 9 Aug 2018
|
[ 06:58 jbeich ] (Only the first 10 of 404 ports in this commit are shown above. )
devel/boost-*: update to 1.68.0
- Switch to C++14 for libboost_system to support C++14 consumers
Changes: http://www.boost.org/users/history/version_1_68_0.html
PR: 229569
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D16165
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Mon, 18 Jun 2018
|
[ 19:03 linimon ] (Only the first 10 of 28 ports in this commit are shown above. )
Adjust USES to fix builds on gcc-based architectures.
While here, pet portlint.
Tested for no regression on amd64.
Approved by: portmgr (tier-2 blanket)
|
|
Wed, 18 Apr 2018
|
[ 13:57 jbeich ] (Only the first 10 of 388 ports in this commit are shown above. )
devel/boost-*: update to 1.67.0
Changes: http://www.boost.org/users/history/version_1_67_0.html
PR: 227427
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D15030
|
|
Mon, 19 Feb 2018
|
[ 11:10 antoine ] (Only the first 10 of 442 ports in this commit are shown above. )
Reduce dependency on the python2 metaport
PR: 225752
Submitted by: Yasuhiro KIMURA
|
|
Thu, 18 Jan 2018
|
[ 04:11 jbeich ] (Only the first 10 of 356 ports in this commit are shown above. )
devel/boost-*: update to 1.66.0
Changes: http://www.boost.org/users/history/version_1_66_0.html
PR: 223922
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D13279
|
|
Tue, 16 Jan 2018
|
[ 15:22 bsam ]
devel/libftdi1: DOCS and PYTHON options can not be used together.
PR: 219013
Submitted by: drhowarddrfine@charter.net
Patch by: w.schwarzenfeld@utanet.at
|
|
Wed, 20 Dec 2017
|
[ 19:34 bapt ] (Only the first 10 of 13 ports in this commit are shown above. )
Switch from swig 2.0 to swig 3.0
|
|
Mon, 25 Sep 2017
|
[ 00:08 jbeich ] (Only the first 10 of 342 ports in this commit are shown above. )
devel/boost-*: update to 1.65.1
Changes: http://www.boost.org/users/history/version_1_65_1.html
PR: 218835
Approved by: maintainer timeout (1.65.1: 2 weeks; 1.65.0: 1 month)
Tested by: jhibbits (on powerpc64, earlier version)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D11582
|
[ 00:05 jbeich ] (Only the first 10 of 327 ports in this commit are shown above. )
devel/boost-*: enable C++11 features
PR: 218835
Obtained from: https://github.com/DragonFlyBSD/DeltaPorts/pull/690
Approved by: maintainer timeout (2 months)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D11582
|
|
Sat, 19 Aug 2017
|
[ 13:05 bsam ]
devel/libftdi1: Update to version 1.4 and bump dependent ports.
|
|
Tue, 2 May 2017
|
[ 06:48 jbeich ] (Only the first 10 of 336 ports in this commit are shown above. )
devel/boost-*: update to 1.64.0
Changes: http://www.boost.org/users/history/version_1_64_0.html
PR: 218835
Approved by: office (bapt)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D10472
|
|
Mon, 10 Apr 2017
|
[ 00:27 linimon ] (Only the first 10 of 27 ports in this commit are shown above. )
These ports now build on powerpc64.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Fri, 6 Jan 2017
|
[ 08:45 jbeich ] (Only the first 10 of 324 ports in this commit are shown above. )
devel/boost-*: update to 1.63.0
Changes: http://www.boost.org/users/history/version_1_63_0.html
PR: 215598
Exp-run by: antoine
Approved by: office (bapt)
MFH: 2017Q1
|
|
Wed, 23 Nov 2016
|
[ 12:45 jbeich ] (Only the first 10 of 353 ports in this commit are shown above. )
devel/boost-*: update to 1.62.0
- Enable `long double` C99 math usage
- Switch 9.x back to building with GCC
Changes: http://www.boost.org/users/history/
PR: 199601
Submitted by: Chen Xu, bapt, amdmi3, truckman (based on)
Reviewed by: rakuco (kde) (earlier version)
Exp-run by: antoine (3 tries), truckman (consumers only, earlier versions)
Approved by: bapt (office)
|
|
Thu, 13 Oct 2016
|
[ 20:52 bsam ]
devel/libftdi1: Update to version 1.3.
|
|
Sun, 9 Oct 2016
|
[ 21:25 bsam ]
Take maintainership.
Approved by: Uffe Jakobsen <uffe@uffe.org> (maintainer, via e-mail)
|
|
Tue, 20 Sep 2016
|
[ 09:05 linimon ]
Mark as broken on sparc64. While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Mon, 23 May 2016
|
[ 20:35 amdmi3 ] (Only the first 10 of 217 ports in this commit are shown above. )
Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed
Approved by: portmgr blanket
|
|
Thu, 21 Apr 2016
|
[ 16:43 swills ] (Only the first 10 of 419 ports in this commit are shown above. )
many ports: mark broken on powerpc64
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 7 Jan 2016
|
[ 14:54 jhale ] (Only the first 10 of 12 ports in this commit are shown above. )
Add USES=pathfix support for CMake. Some ports that use CMake to build
already had USES=pathfix, although it did nothing. For those ports, I
either removed it as they were handling the pkgconfig files differently
or I removed patches and substitutions that accomplished the same thing
as pathfix.
Differential Revision: https://reviews.freebsd.org/D850
Reviewed by: antoine, bapt, tijl
Approved by: portmgr (bapt)
|
|
Mon, 20 Oct 2014
|
[ 16:04 mva ] (Only the first 10 of 564 ports in this commit are shown above. )
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit)
|
|
Sun, 3 Aug 2014
|
[ 21:35 pi ]
New port: devel/libftdi1
Talking to FTDI's FT2232C, FT232BM and FT245BM type chips including
the popular bitbang mode, using libusb.
WWW: http://www.intra2net.com/en/developer/libftdi/
Please note that this is an updated version of devel/libftdi,
but dependencies require both versions to be available for a while.
PR: 191656
Submitted by: uffe@uffe.org
|
Number of commits found: 38 |
As an Amazon Associate I earn from qualifying purchases.