Port details on branch 2022Q3 |
- libopencm3 LGPLv3 Cortex-M0/M3/M4 runtime library
- 0.8.0_1 devel =0 0.8.0_1Version of this port present on the latest quarterly branch.
- Maintainer: lev@FreeBSD.org
- Port Added: 2014-02-15 19:16:36
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- License: LGPL3
- WWW:
- https://github.com/libopencm3/libopencm3
- Description:
- The libopencm3 project aims to create an open-source firmware library for
various ARM Cortex-M3 microcontrollers.
Currently (at least partly) supported microcontrollers:
- ST STM32F1 series
- ST STM32F2 series
- ST STM32F4 series
- NXP LPC1311/13/42/43
The library is written completely from scratch based on the vendor datasheets,
programming manuals, and application notes. The code is meant to be used
with a GCC toolchain for ARM (arm-elf or arm-none-eabi), flashing of the
code to a microcontroller can be done using the OpenOCD ARM JTAG software.
This port depends on devel/gcc-arm-embedded toolchain.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- libopencm3>0:devel/libopencm3
- To install the port:
- cd /usr/ports/devel/libopencm3/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/libopencm3
- pkg install libopencm3
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: libopencm3
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1610561443
SHA256 (libopencm3-libopencm3-v0.8.0_GH0.tar.gz) = 0acbc805d2c1450591412a109290cec2b3fb7c302a57ade34f2247d632c405a3
SIZE (libopencm3-libopencm3-v0.8.0_GH0.tar.gz) = 848882
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- arm-none-eabi-gcc : devel/gcc-arm-embedded
- gmake>=4.3 : devel/gmake
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- devel_libopencm3
- USES:
- gmake python:build shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|