| non port: devel/libsigrok/Makefile |
|
SVNWeb
|
Number of commits found: 29 |
|
Mon, 27 Feb 2023
|
[ 15:45 Muhammad Moinur Rahman (bofh)  ]    841aab2
devel/libsigrok: Runtime fix
C/C++ Comments handling are broken in swig 4 which is a pending issue
for more than 2 years. Use this hack for now to skip parsing comments.
- Pet portclippy
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 18 Aug 2022
|
[ 00:23 Dima Panov (fluffy) ] e87bbc4
devel/libsigrok: unbreak build with py310+ (+)
libsigrokcxx library require python <= 3.9 to build.
While here, add missed dependencies
Approved by: portmgr blanket (fix build)
Reporteb by: poudriere failure
|
|
Fri, 12 Aug 2022
|
[ 14:46 Dima Panov (fluffy) ] 4cf39de (Only the first 10 of 722 ports in this commit are shown above. )
*/*: bump all consumers after recent boost upgrade
|
|
Fri, 5 Aug 2022
|
[ 17:58 Bernard Spil (brnrd) ] 57a153b (Only the first 10 of 35 ports in this commit are shown above. )
archivers/libzip: Bump PORTREVISION on dependent ports
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 6 Jun 2022
|
[ 11:48 Muhammad Moinur Rahman (bofh) ] ca473fb (Only the first 10 of 12 ports in this commit are shown above. )
all: Take maintainership
|
[ 11:19 Rene Ladan (rene) ] 65e2c3c (Only the first 10 of 28 ports in this commit are shown above. )
all: return bsam's ports to the pool after his commit bit got safekept
|
|
Sun, 10 Oct 2021
|
[ 19:44 Baptiste Daroussin (bapt) ] 2c672a4 (Only the first 10 of 586 ports in this commit are shown above. )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 14 Jan 2020
|
[ 20:28 bsam ]  
devel/libsigrok: Update to 0.5.2
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Thu, 20 Dec 2018
|
[ 08:43 linimon ]
Building this port on GCC-based architectures requires USES=compiler:c11.
PR: 234072
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
|
|
Sat, 3 Nov 2018
|
[ 12:34 bsam ]
devel/libsigrok: Update to version 0.5.1
This is a "minor" release that doesn't change or remove any existing
public API functions, so all existing clients will continue to work
(without even the need to recompile).
The following hardware is now (additionally) supported:
* Logic analyzers: DreamSourceLab DSLogic Basic/Plus, Hantek 4032L,
IPDBG (ipdbg.org FPGA IP debugger), Meilhaus Logian-16L, Saleae
Logic Pro 16, ZEROPLUS Logic Cube LAP-C (16128+) / LAP-16032U
* Oscilloscopes: Agilent MSO7034A, Hantek DSO-2250, Rigol DS4000
series, Siglent SDS1000/SDS2000 series
* Programmable power supplies: GW Instek GPD series, HP
6631B/66332A/6633B/6634B, Korad KD3005P, RDTech DPS/DPH series,
Rigol DP711/DP712, RND KA3005P, Tenma 72-2540 (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 13 Oct 2018
|
[ 00:44 amdmi3 ]
- Unbreak some drivers by importing patch from upstream
PR: 228789
Submitted by: romain
Approved by: maintainer timeout (bsam, 4 months)
|
|
Wed, 11 Oct 2017
|
[ 21:18 bsam ]
devel/libsigrok: Update to version 0.5.0.
|
|
Wed, 27 Sep 2017
|
[ 18:08 rakuco ] (Only the first 10 of 18 ports in this commit are shown above. )
Bump PORTREVISION in ports depending on archivers/libzip.
libzip was updated to 1.3.0 in r450774, and its SOVERSION went from .4 to .5
after the removal of zip_archive_set_tempdir(). All dependent ports continue to
build fine without that symbol.
PR: 222638
|
|
Wed, 22 Feb 2017
|
[ 15:02 bapt ] (Only the first 10 of 52 ports in this commit are shown above. )
Drop useless dependency on gmake (bmake build those fine)
|
|
Mon, 9 Jan 2017
|
[ 13:16 amdmi3 ] (Only the first 10 of 104 ports in this commit are shown above. )
- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL
Approved by: portmgr blanket
|
|
Thu, 5 Jan 2017
|
[ 22:58 jbeich ] (Only the first 10 of 33 ports in this commit are shown above. )
Assume "pkg-config libusb*" works after 9.x EOL
FreeBSD appears to use different pkg-config name for 0.1.x API but it
doesn't matter much as 0.1, 1.0 and 2.0 share CFLAGS/LIBS.
|
|
Sun, 9 Oct 2016
|
[ 21:25 bsam ]
Take maintainership.
Approved by: Uffe Jakobsen <uffe@uffe.org> (maintainer, via e-mail)
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Fri, 28 Aug 2015
|
[ 10:48 makc ] (Only the first 10 of 18 ports in this commit are shown above. )
- Bump PORTREVISION after libzip update
|
|
Tue, 7 Oct 2014
|
[ 06:32 antoine ]
Fix build on head and 10.1
|
|
Mon, 28 Jul 2014
|
[ 23:05 wg ]
devel/libsigrok: update to 0.3.0
PR: 192152
Submitted by: maintainer (based on)
|
|
Mon, 5 May 2014
|
[ 22:50 tijl ] (Only the first 10 of 19 ports in this commit are shown above. )
Convert archivers/libzip to USES=libtool. Bump PORTREVISION on all
dependent ports.
cad/repsnapper:
- Remove excessive dependencies.
- Convert to USES=libtool.
- Set LDFLAGS to fix detection of libintl.
- Use @sample.
databases/mysql-workbench51:
- Remove remnants of former slave ports.
- Convert some LIB_DEPENDS to USE_GNOME.
- Convert to USES=libtool.
- Staging.
databases/mysql-workbench52:
- USES=libtool.
devel/libsigrok:
- USES=libtool.
- INSTALL_TARGET=install-strip.
devel/liborcus:
- USES=libtool tar:bzip2.
|
|
Mon, 27 Jan 2014
|
[ 19:15 ak ]
- Update to 0.2.2
- Bump PORTREVISION in ports that depend on libsigrok
PR: ports/185972
Submitted by: Uffe Jakobsen <uffe@uffe.org> (maintainer)
|
|
Thu, 2 Jan 2014
|
[ 21:29 jgh ]
- link library to libusb
- bump portrevision as this is required for the library
Submitted by: jgh@
Approved by: maintainer, uffe@uffe.org
|
|
Mon, 30 Dec 2013
|
[ 23:46 jgh ]
The sigrok project aims at creating a portable, cross-platform,
Free/Libre/Open-Source signal analysis software suite that supports
various device types, such as logic analyzers, MSOs, oscilloscopes,
multimeters, LCR meters, sound level meters, thermometers,
hygrometers, anemometers, light meters, DAQs, dataloggers,
function generators, spectrum analyzers, power supplies,
GPIB interfaces, and more.
WWW: http://sigrok.org/
PR: ports/179853
Submitted by: Uffe Jakobsen <uffe@uffe.org>
|
Number of commits found: 29 |
As an Amazon Associate I earn from qualifying purchases.