notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: the WWW: line in pkg-descr was relocated to a WWW= line in Makefile. Each port in FreshPorts has a homepage link. Look for it right after the Description: on each port's home page.

Do I know someone who can pick up a server from 7401 E. Ben White Blvd. Austin TX?

The emphasis is on know, or recommended by someone I know. This is the original FreshPorts server, way past useful: RAID, 8GB RAM, etc. The drives need to be wiped and everything recycled.
non port: devel/libstroke/Makefile
SVNWeb

Number of commits found: 31

Wed, 7 Sep 2022
[ 21:10 Stefan Eßer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:21 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  commit hash:aa6eefd5e663357e8223399bc38c7987f5e35746  aa6eefd  (Only the first 10 of 5087 ports in this commit are shown above. View all ports for this commit)
devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Mon, 4 Nov 2019
[ 22:20 zeising search for other commits by this committer ] Original commit   Revision:516748 (Only the first 10 of 102 ports in this commit are shown above. View all ports for this commit)
Add USES=xorg USES=gl, ports categories d

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.
Sat, 28 Mar 2015
[ 15:25 bapt search for other commits by this committer ] Original commit   Revision:382506
Convert to USES=autoreconf
Sun, 31 Aug 2014
[ 13:25 tijl search for other commits by this committer ] Original commit   Revision:366757
- Convert to USES=libtool and add INSTALL_TARGET=install-strip
- Run libtoolize and other autotools because the port ships with libtool
  1.2e which only supports FreeBSD versions up to 3.x
Tue, 10 Jun 2014
[ 07:39 olgeni search for other commits by this committer ] Original commit   Revision:357277 (Only the first 10 of 388 ports in this commit are shown above. View all ports for this commit)
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.

CR:		D196
Approved by:	portmgr (bapt)
Wed, 9 Oct 2013
[ 23:59 madpilot search for other commits by this committer ] Original commit   Revision:329943
- Convert to staging
- Remove option for legacy GTK1/Gnome1 (EOLed) support
Fri, 20 Sep 2013
[ 17:13 bapt search for other commits by this committer ] Original commit   Revision:327724 (Only the first 10 of 2998 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
Wed, 4 Sep 2013
[ 23:10 bapt search for other commits by this committer ] Original commit   Revision:326334
Convert USE_GCC=any into proper USE_CSTD=gnu89
Thu, 6 Dec 2012
[ 23:28 eadler search for other commits by this committer ] Original commit   Revision:308407
libstroke fails to link with clang as the compiler

Feature safe:	yes
Tue, 12 Jun 2012
[ 09:17 bapt search for other commits by this committer ] Original commit  (Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
Convert to new options framework
Tue, 2 Aug 2011
[ 10:05 bapt search for other commits by this committer ] Original commit 
Update master_site
Sat, 4 Dec 2010
[ 07:34 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1730 ports in this commit are shown above. View all ports for this commit)
Sync to new bsd.autotools.mk
Sun, 2 Aug 2009
[ 19:36 mezz search for other commits by this committer ] Original commit  (Only the first 10 of 1514 ports in this commit are shown above. View all ports for this commit)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
Sun, 7 Jun 2009
[ 07:53 danfe search for other commits by this committer ] Original commit 
- Mention that supported Gtk+ version is 1.2.x (legacy one)
- Reindent excessively long line while here
Sat, 19 Apr 2008
[ 17:56 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 2842 ports in this commit are shown above. View all ports for this commit)
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Sat, 19 May 2007
[ 20:32 flz search for other commits by this committer ] Original commit  (Only the first 10 of 7868 ports in this commit are shown above. View all ports for this commit)
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
Mon, 14 Aug 2006
[ 22:55 clsung search for other commits by this committer ] Original commit  (Only the first 10 of 102 ports in this commit are shown above. View all ports for this commit)
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>
Thu, 23 Feb 2006
[ 10:40 ade search for other commits by this committer ] Original commit  (Only the first 10 of 2514 ports in this commit are shown above. View all ports for this commit)
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Tue, 31 Jan 2006
[ 15:41 danfe search for other commits by this committer ] Original commit 
Properly handle GTK+ dependency.  This should fix packaging issues caused by
previous commit to pkg-plist.

Reported by:    krismail
Fri, 27 Jan 2006
[ 10:55 danfe search for other commits by this committer ] Original commit 
- Clean up Makefile
- Kill attribution in pkg-descr
- Fix broken pkg-plist
Tue, 15 Nov 2005
[ 06:52 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1438 ports in this commit are shown above. View all ports for this commit)
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Tue, 31 May 2005
[ 19:00 oliver search for other commits by this committer ] Original commit  (Only the first 10 of 14 ports in this commit are shown above. View all ports for this commit)
change the libtool version to use from 1.3 to 1.5
Fri, 9 Jul 2004
[ 17:43 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 489 ports in this commit are shown above. View all ports for this commit)
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
Fri, 28 May 2004
[ 01:28 edwin search for other commits by this committer ] Original commit 
remove maintainership

    I haven't had the time to be a good maintainer for the lang/expect
    and devel/libstroke ports for a very long time.

    Please change maintainership to ports@ and hopefully someone
    w/more time and energy can pick up the torch.

PR:             ports/67275
Submitted by:   Jerry A! <jerry@thehutt.org>
Sun, 14 Mar 2004
[ 06:17 ade search for other commits by this committer ] Original commit  (Only the first 10 of 945 ports in this commit are shown above. View all ports for this commit)
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Wed, 4 Feb 2004
[ 05:21 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 1588 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)
Fri, 21 Feb 2003
[ 11:23 knu search for other commits by this committer ] Original commit  (Only the first 10 of 422 ports in this commit are shown above. View all ports for this commit)
De-pkg-comment.
Tue, 2 Apr 2002
[ 03:23 pat search for other commits by this committer ] Original commit 
Add missing XLIB dependency

PR:             36615
Submitted by:   maintaienr
Thu, 7 Feb 2002
[ 01:19 petef search for other commits by this committer ] Original commit 
Add libstroke 0.5.1, a stroke translation library.    

Number of commits found: 31