non port: devel/lwp/Makefile |
SVNWeb
|
Number of commits found: 38 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 11 Mar 2017
|
[ 07:27 araujo ]
Update to 2.8.
Submitted by: John Hixson <jhixson@gmail.com> (via email at AsiaBSDCon)
|
Wed, 23 Jul 2014
|
[ 21:56 amdmi3 ]
- Switch to USES=libtool, drop .la files
- Strip libraries
Approved by: portmgr blanket
|
Sun, 17 Nov 2013
|
[ 11:09 sunpoet ]
- Add LICENSE
- Update MASTER_SITES:
- Remove defunct ftp.planetmirror.com and ftp.nctu.edu.tw
- Add http:// links
|
Thu, 3 Oct 2013
|
[ 12:55 bsam ]
. support staging;
. remove the indefinite article from COMMENT;
. USE_GMAKE=yes -> USES=gmake;
. use USES=pathfix instead post-extract target.
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
Thu, 1 Apr 2010
|
[ 00:43 wen ]
- Update to 2.6
- Reset maintainer to ports@
|
Wed, 21 Jan 2009
|
[ 23:08 beech ]
- Update to 2.5
PR: ports/130743
Submitted by: Wen Heping <wenheping@gmail.com> (maintainer)
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
Tue, 15 Apr 2008
|
[ 02:06 clsung ]
- Update to 2.4
- submitter => maintainer
PR: ports/122721
Submitted by: maintainer (Wen heping)
|
Sun, 15 Apr 2007
|
[ 19:15 gabor ] (Only the first 10 of 17 ports in this commit are shown above. )
- Remove FreeBSD 4.X support from unmaintained ports in categories starting with
letter d-e
|
Mon, 9 Oct 2006
|
[ 06:05 vd ]
Mark as BROKEN on 4.x:
In file included from lwp.private.h:50,
from iomgr.c:53:
lwp_ucontext.h:33: conflicting types for `mcontext_t'
/usr/include/machine/ucontext.h:63: previous declaration of `mcontext_t'
lwp_ucontext.h:39: conflicting types for `ucontext_t'
/usr/include/sys/ucontext.h:51: previous declaration of `ucontext_t'
gmake[2]: *** [liblwp_la-iomgr.lo] Error 1
Reported by: kris
|
Thu, 5 Oct 2006
|
[ 17:09 vd ] (Only the first 10 of 21 ports in this commit are shown above. )
Upgrade:
* net/coda6_server and net/coda6_client from 6.0.7 to 6.1.1 and thus
un-DEPRECATE them
* devel/rvm from 1.10 to 1.13
* devel/lwp from 1.12 to 2.3
* devel/rpc2 from 1.28 to 2.2
These four are tightly related so I upgrade them in one.. well.. changeset
|
Mon, 14 Aug 2006
|
[ 22:55 clsung ] (Only the first 10 of 102 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
Thu, 18 Nov 2004
|
[ 21:01 krion ]
Update to 1.12
PR: ports/74034
Submitted by: Radim Kolar <hsn@netmag.cz>
|
Tue, 10 Aug 2004
|
[ 17:06 osa ] (Only the first 10 of 17 ports in this commit are shown above. )
Update coda5*- and coda6*-affiliated software.
Fix build under fresh -CURRENT (gcc 3.4.2).
Bump or remove PORTREVISION where it needed.
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
Sat, 6 Mar 2004
|
[ 23:07 kris ]
BROKEN on !i386 and !alpha: Does not compile
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
Fri, 28 Mar 2003
|
[ 05:06 kevlo ]
Update to 1.10
PR: 50336
Submitted by: Tim Robbins <tim@robbins.dropbear.id.au>
|
Thu, 20 Feb 2003
|
[ 17:07 knu ] (Only the first 10 of 432 ports in this commit are shown above. )
De-pkg-comment.
|
Sun, 22 Dec 2002
|
[ 17:46 ijliao ]
- Do not install useless .la file
PR: 45928
Submitted by: Ports Fury
|
Thu, 7 Nov 2002
|
[ 03:40 adamw ]
Set MAINTAINER to ports@ for ports without one. "One" being "a maintainer"
in this case.
Approved by: pat
|
Fri, 16 Nov 2001
|
[ 20:52 shafeeq ]
Updated for Coda-5.3.15
|
Thu, 14 Jun 2001
|
[ 20:09 shafeeq ]
Updated to Coda 5.3.15 Always using the provided configure script now
|
Mon, 23 Apr 2001
|
[ 21:41 shafeeq ]
Updated to Coda 5.3.14
|
Fri, 19 Jan 2001
|
[ 21:57 shafeeq ] (Only the first 10 of 11 ports in this commit are shown above. )
Updated for coda-5.3.12, skipping past 5.3.11
|
Thu, 5 Oct 2000
|
[ 23:42 shafeeq ]
Updated to latest versions needed by coda-5.3.9 release
|
Fri, 16 Jun 2000
|
[ 22:52 asami ] (Only the first 10 of 264 ports in this commit are shown above. )
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
|
[ 09:48 sobomax ] (Only the first 10 of 181 ports in this commit are shown above. )
Fourth round of INSTALLS_SHLIBS conversion.
|
Mon, 29 May 2000
|
[ 05:13 steve ]
Adding lpw version 1.4. A userspace thread library developed as part of the
CODA project.
|
Number of commits found: 38 |