13:34 lev 

 New port: GCC toolchain for TI's MSP430 microcontrollers.

 It is official open-source release, prepared for TI by RedHat.

 Old "mspgcc" ports, which were made obsolete almost year ago, are marked
 as DEPRECATED.

 

15:38 lev 

  Fix building on modern systems.

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

17:12 tijl 

Add USES=libtool

 

07:32 antoine 

Allow to build with texinfo from ports

With hat:	portmgr

 

19:11 lev 

 STAGEfy msp430 toolchain ports, un-break msp430-gdb with clang.

 

11:10 mat 

Fixup pkgnames.

PR:		ports/184440, ports/184441, ports/184442, ports/184443, ports/184444,
ports/184445, ports/184446, ports/184447, ports/184448, ports/184449,
ports/184450
Submitted by:	mat
Approved by:	portmgr (bapt)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

17:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

 

08:39 az 

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

 

20:01 bsam 

Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).

Co-authors:	bapt, madpilot and bsam (me)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

08:50 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

 

11:32 bapt 

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

 

14:51 lev 

 (1) Update with latest LTS patches
 (2) Add patch from trunk to support FRAM devices.

PR:	ports/172352 (2)
Feature safe: yes

 

15:35 lev 

  Update to brand-new LTS (Long Terms Support) release.
  gcc is 4.6.3
  binutils is 2.21.1a

Feature safe: yes

17:39 lev 

  Add new patch from upstream:

This fixes an error when calculating strlen on an auto-storage char array that
happens be zero bytes offset from the stack pointer.

extern unsigned int strlen (const char *s);
void setval (char* str, int len);
void useval (const char* str, unsigned char len);

void tryit ()
{
  char tmp[17];
  setval (tmp, sizeof(tmp));
  useval (tmp, strlen(tmp));
}

13:15 lev 

  New patch from upstream:

  This fixes an error in comparisons of the lower parts of a multi-word integer
against a constant when using a comparison operation not directly supported
by an MSP430 instruction.  E.g.,:

int test_gtu32 (uint32_t x)
{
  if (x > 0xFFFF)
    return 1;
  return 0;
}

10:25 lev 

   Update to latest "upstream" (Long Time Support) patches for all MSP430
 toolchain components.

19:55 lev 

  Add new LTS (upstream) patch.

13:21 lev 

  Add latest patches to msp430-binutils and msp430mcu.

11:52 lev 

  (1) Make binutils/gcc ready for further official bugfix patches
      according to new mspgcc release politic.
  (2) Add official (mspgcc) ARCH problem patch to binutils.
  (3) Add official (mspgcc) patch to gcc.
  (4) Fix msp430mcu plist, if it is installed alone.
  (5) Make portlint (almost) happy.

16:26 lev 

  Update msp430 toolchain to new version:
   mspgcc release 20110716:
     binutils-2.21.1.20110716
     gcc-4.5.3.20110706
     gdb-7.2.20110103

     msp430mcu-20110613 (new port, platform headers, converted from offical TI
                         ones and linking scripts, generated from datasheets).

     msp430-libc-1.0.20110612

   Preserve old msp430-gcc as `devel/msp430-gcc3'
   Make mps430-libc work with both gcc versions.
   Add CONFLICTS to msp430-gcc*.
   Add LICENSE clauses to all FSF-based ports.

09:36 rafan 

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

13:39 lev 

  Latest gcc 3.4.4, latest msp430 patches.

01:53 kris 

Now builds on amd64

Approved by:    portmgr (self)

10:55 lev 

  Update to latest (and recommended by msp430 maintainers) version 3.4.1

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

08:56 lev 

  Some bugfixes

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

13:10 lev 

  Add new devices

11:37 lev 

  Broken on amd64, as any other gcc.

14:45 lev 

  New devices added.
  New function attribute `task' fo SOS RTOS added.

12:50 lev 

  New option for strict align, some bugfixes.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

14:59 lev 

  Fix multiplication code generation.

13:40 lev 

  Fix some old devices, add new ones.

12:23 lev 

  Fixes in compare.

12:51 lev 

  [1] Update to new version.
  [2] Really don't install non-unique files. MANx too.

15:05 lev 

  Don't install `${PREFIX}/lib/libiberty.a'
  Now this port doesn't install non-unique files.

13:16 lev 

  Fix one bug in optimizer/code generator

Obtained from:  Target's maintainers

09:37 osa 

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

12:22 lev 

  Target's maintainers claim, that gcc 3.2.x produce better code than 3.3.x
  All future updates for msp430 target will be provided only for 3.2.x and 3.4
  versions of gcc.

  So, I've downgraded gcc port to 3.2.3 + last msp430 patches.

Obtained from:  Target's maintainers

13:31 lev 

  Some fixes in target.

13:26 lev 

  Update to new gcc release: 3.3.1

12:33 lev 

  Fix some bugs in optimizer.

Obtained from:  Target mainainers

13:03 lev 

  Fix "internal compiler error", add some optimizations.

09:33 lev 

  Update with last fixes in target's patches.

11:43 lev 

  Update to last patche's version.

17:54 lev 

  Update to latest patches from mspgcc.sf.net.
  Here are two important fixes.

Approved by:    sobomax

11:16 lev 

 Update to latest version.

Approved by:    sobomax

13:53 lev 

Change MAINTAINER field of my ports to lev@FReeBSD.org, my brand-new
committer's e-mail

Approved by:    sobomax

14:09 nork 

Update to 3.2.2.20030304.

PR:             ports/50395
Submitted by:   Lev A. Serbryakov <lev@serebryakov.spb.ru> (maintainer)

00:39 edwin 

[MAINTAINER UPDATE] Update port `devel/msp430-gcc' to new, improved
and fixed version based on gcc 3.2.2.

PR:             ports/48498
Submitted by:   Lev A. Serbryakov <lev@serebryakov.spb.ru>

11:23 knu 

De-pkg-comment.

18:53 nork 

Update to 20021120.

PR:             ports/45566
Submitted by:   Lev A. Serbryakov <lev@serebryakov.spb.ru> (maintainer)

06:02 sada 

- upgrade patchversion to 20021105
- portlint
PR:     ports/45161
Submitted by:   maintainer

10:16 jkoshy 

GCC Cross compiler for the Texas Instruments MSP430 architecture.

PR:             ports/44139
Submitted by:   Lev A. Serbryakov <lev@serebryakov.spb.ru>