[ 22:33 amdmi3  ]

• 1.2 devel/openocd/Makefile
• 1.2 devel/openocd/distinfo
• 1.2 devel/openocd/files/patch-openocd.c
• 1.2 devel/openocd/pkg-message
• 1.2 devel/openocd/pkg-plist

- Update to 0.2.0

PR:             137861
Submitted by:   CeDeROM <tomek.cedro@gmail.com> (maintainer)

[ 00:23 amdmi3  ]

• 1.3508 devel/Makefile
• 1.1 devel/openocd/Makefile
• 1.1 devel/openocd/distinfo
• 1.1 devel/openocd/files/patch-openocd.c
• 1.1 devel/openocd/pkg-descr
• 1.1 devel/openocd/pkg-message
• 1.1 devel/openocd/pkg-plist

The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system
programming and boundary-scan testing for embedded target devices. OpenOCD uses
a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
compliant taps on your target board. OpenOCD currently supports many types
of hardware dongles: USB based, parallel port based, and other standalone boxes
that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
via the GDB protocol. Flash writing is supported for external CFI compatible
NOR flashes (Intel and AMD/Spansion command set) and several internal flashes
(LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
included.

WWW: http://openocd.berlios.de/

PR:             135094
Submitted by:   CeDeROM <tomek.cedro@gmail.com>