16:01 mat 

Convert to UCL & cleanup pkg-message (categories d)

 

13:32 rene 

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

 

14:12 rakuco 

Update to 0.6.0.

PR:		ports/171477
Submitted by:	Tomasz CEDRO <cederom@tlen.pl> (maintainer)

 

17:11 scheidell 

-update openocd from 0.4.0 -> 0.5.0
-committers notes:  patch modified to use userspace 'WITH_*' and not
-oslevel 'USE_*', requested by gabor

PR:             ports/161989
Submitted by:   maintainer
Reviewed by:    gabor
Approved by:    gabor(mentor)
Feature safe:   yes

14:37 miwi 

- Update to 0.4.0

PR:             144241
Submitted by:   CeDeROM <tomek.cedro@gmail.com> (maintainer)

22:33 amdmi3 

- Update to 0.2.0

PR:             137861
Submitted by:   CeDeROM <tomek.cedro@gmail.com> (maintainer)

00:23 amdmi3 

The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system
programming and boundary-scan testing for embedded target devices. OpenOCD uses
a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
compliant taps on your target board. OpenOCD currently supports many types
of hardware dongles: USB based, parallel port based, and other standalone boxes
that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
via the GDB protocol. Flash writing is supported for external CFI compatible
NOR flashes (Intel and AMD/Spansion command set) and several internal flashes
(LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
included.

WWW: http://openocd.berlios.de/

PR:             135094
Submitted by:   CeDeROM <tomek.cedro@gmail.com>