| non port: devel/p5-Config-ApacheFormat/Makefile |
|
SVNWeb
|
Number of commits found: 18 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Fri, 15 Sep 2017
|
[ 08:58 mat ] (Only the first 10 of 2495 ports in this commit are shown above. )
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 24 Dec 2014
|
[ 00:14 bofh ] (Only the first 10 of 432 ports in this commit are shown above. )
Change my non-FreeBSD MAINTAINER mail to bofh@
Approved by: bapt
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 25 May 2014
|
[ 12:42 sunpoet ]
- Add LICENSE
- Pass maintainership to submitter
- While I'm here:
- Fix *_DEPENDS: Scalar::Util is already in all supported Perl releases
- Add missing RUN_DEPENDS
- Bump PORTREVISION for dependency change
PR: ports/189612
Submitted by: Muhammad Moinur Rahman <5u623l20@gmail.com>
|
|
Mon, 28 Oct 2013
|
[ 13:46 vanilla ] (Only the first 10 of 211 ports in this commit are shown above. )
support STAGEDIR.
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Fri, 2 Aug 2013
|
[ 18:21 az ] (Only the first 10 of 354 ports in this commit are shown above. )
- Convert to new perl framework
|
|
Tue, 5 Jun 2012
|
[ 18:15 ak ] (Only the first 10 of 15 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Submitted by: az
Approved by: eadler (mentor)
|
|
Sun, 2 Aug 2009
|
[ 02:51 wxs ] (Only the first 10 of 32 ports in this commit are shown above. )
- Reset maintainer and remove old MASTER_SITES.
PR: ports/137224
Submitted by: Martin Tournoij <carpetsmoker@rwxrwxrwx.net> (maintainer)
|
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
|
Sat, 8 Sep 2007
|
[ 00:56 linimon ] (Only the first 10 of 101 ports in this commit are shown above. )
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
|
Fri, 19 Jan 2007
|
[ 06:59 itetcu ]
Switch maintianer's email from gmail to xs4all.nl
PR: 108109
Submitted by: Martin Tournoij (maintainer)
|
|
Wed, 26 Jul 2006
|
[ 19:38 novel ]
This module is designed to parse a configuration file in the same syntax
used by the Apache web server (see http://httpd.apache.org for
details). This allows you to build applications which can be easily
managed by experienced Apache admins. Also, by using this module,
you'll benefit from the support for nested blocks with built-in
parameter inheritance. This can greatly reduce the amount or repeated
information in your configuration files.
A good reference to the Apache configuration file format can be found
here:
http://httpd.apache.org/docs-2.0/configuring.html
WWW: http://search.cpan.org/~samtregar/Config-ApacheFormat-1.2/
PR: ports/100885
Submitted by: Martin Tournoij <carpetsmoker at gmail.com>
|
Number of commits found: 18 |
As an Amazon Associate I earn from qualifying purchases.