| non port: devel/p5-Data-Printer/Makefile |
|
SVNWeb
|
Number of commits found: 30 |
|
Mon, 30 Jan 2023
|
[ 12:59 Po-Chuan Hsieh (sunpoet)  ]    ac5b4f0
devel/p5-Data-Printer: Update to 1.001000
Changes: https://metacpan.org/dist/Data-Printer/changes
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 18 Apr 2021
|
[ 05:42 Po-Chuan Hsieh (sunpoet) ] 07f625f
devel/p5-Data-Printer: Update to 1.000004
Changes: https://metacpan.org/changes/distribution/Data-Printer
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 7 Mar 2021
|
[ 22:16 sunpoet ]  
Update to 1.000001
Changes: https://metacpan.org/changes/distribution/Data-Printer
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Fri, 15 Sep 2017
|
[ 08:58 mat ] (Only the first 10 of 2495 ports in this commit are shown above. )
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
|
Wed, 2 Aug 2017
|
[ 18:35 sunpoet ]
Update to 0.40
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Mon, 17 Apr 2017
|
[ 16:05 sunpoet ]
Update to 0.39
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 1 Feb 2016
|
[ 19:47 sunpoet ]
- Update to 0.38
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Mon, 19 Oct 2015
|
[ 20:18 sunpoet ]
- Add NO_ARCH
|
|
Sat, 30 May 2015
|
[ 13:46 sunpoet ]
- Update to 0.36
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 16 Feb 2014
|
[ 10:37 sunpoet ]
- Update to 0.35
- Add LICENSE
- Remove outdated PERL_LEVEL check
- Fix PLIST
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Mon, 30 Sep 2013
|
[ 19:58 sunpoet ] (Only the first 10 of 42 ports in this commit are shown above. )
- Support STAGEDIR
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Wed, 21 Aug 2013
|
[ 17:42 sunpoet ] (Only the first 10 of 155 ports in this commit are shown above. )
- Cleanup Makefile header
|
[ 14:55 sunpoet ] (Only the first 10 of 56 ports in this commit are shown above. )
- Use RUN_DEPENDS:=BUILD_DEPENDS
- Add BUILD_DEPENDS
- Cosmetic change
|
[ 14:08 sunpoet ] (Only the first 10 of 272 ports in this commit are shown above. )
- Convert to new perl framework
|
|
Tue, 18 Jun 2013
|
[ 13:49 az ] (Only the first 10 of 112 ports in this commit are shown above. )
- Cleanup outdated checks. (PERL_LEVEL < 5.12)
- Assign some p5- ports under perl@ maintainership.
Approved by: portmgr@ (bapt@)
|
|
Tue, 13 Mar 2012
|
[ 16:15 pgollucci ] (Only the first 10 of 391 ports in this commit are shown above. )
- Revert ports/165605 as requested by portmgr@
Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.
PR: ports/165605
Approved by: portmgr (bapt)
Feature safe: yes (I sure hope so)
|
|
Thu, 8 Mar 2012
|
[ 18:45 pgollucci ] (Only the first 10 of 403 ports in this commit are shown above. )
- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}
PR: ports/165605
Submitted by: pgollucci (myself)
Approved by: portmgr (linimon)
Exp Run by: linimon
Tested by: make index
|
|
Wed, 15 Feb 2012
|
[ 05:07 sunpoet ]
- Update to 0.3
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Wed, 25 Jan 2012
|
[ 23:11 sunpoet ]
- Update to 0.29
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Mon, 23 Jan 2012
|
[ 19:04 sunpoet ]
- Update to 0.28
Changes: http://search.cpan.org/dist/Data-Printer/Changes
|
|
Wed, 23 Nov 2011
|
[ 17:27 sunpoet ]
- Update to 0.26
Changes: http://search.cpan.org/dist/Data-Printer/Changes
Feature safe: yes
|
|
Sun, 20 Nov 2011
|
[ 09:54 sunpoet ]
- Update to 0.25
- Add TEST_DEPENDS
Changes: http://search.cpan.org/dist/Data-Printer/Changes
Feature safe: yes
|
|
Fri, 28 Oct 2011
|
[ 17:19 sunpoet ]
- Add p5-Data-Printer 0.24
Data::Printer is meant to do one thing and one thing only: display Perl
variables and objects on screen, properly formatted (to be inspected by a
human).
Here's what Data::Printer has to offer to Perl developers, out of the box:
- Very sane defaults (I hope!)
- Highly customizable (in case you disagree with me :)
- Colored output by default
- Human-friendly output, with array index and custom separators
- Full object dumps including methods, inheritance and internals
- Exposes extra information such as tainted data and weak references
- Ability to easily create filters for objects and regular structures
- Ability to load settings from a .dataprinter file so you don't have to write
anything other than "use DDP;" in your code!
WWW: http://search.cpan.org/dist/Data-Printer/
|
Number of commits found: 30 |
As an Amazon Associate I earn from qualifying purchases.