| non port: devel/p5-Data-Throttler/Makefile |
|
SVNWeb
|
Number of commits found: 18 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Sun, 24 Jun 2018
|
[ 20:28 sunpoet ]
Update to 0.08
- Add NO_ARCH
Changes: https://metacpan.org/changes/distribution/Data-Throttler
PR: 229229
Submitted by: Tomohiro Hosaka <bokutin@bokut.in>
Approved by: TERAMOTO Masahiro <markun@onohara.to> (maintainer)
|
|
Fri, 15 Sep 2017
|
[ 08:58 mat ] (Only the first 10 of 2495 ports in this commit are shown above. )
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 29 Jan 2014
|
[ 10:57 az ] (Only the first 10 of 107 ports in this commit are shown above. )
- add stage support
Approved by: portmgr (blanket infrastructure)
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Tue, 10 Sep 2013
|
[ 03:32 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
|
Sat, 22 Jun 2013
|
[ 07:39 culot ]
- Update to 0.06 [1]
- Trim Makefile's header [1]
- Fix dependencies
- Add LICENSE (Artistic 1 & GPL 1)
- Pet portlint(1) by changing tab into space in WWW link
Changes: http://search.cpan.org/dist/Data-Throttler/Changes
PR: ports/179776 [1]
Submitted by: TERAMOTO Masahiro <markun@onohara.to> (maintainer)
|
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
|
Sun, 25 Jul 2010
|
[ 04:14 sahil ]
- Update to 0.05
PR: ports/148903
Submitted by: TERAMOTO Masahiro <markun@onohara.to> (maintainer)
|
|
Sun, 6 Jun 2010
|
[ 20:15 pgollucci ]
- Update to 0.04
PR: ports/147368
Approved by: markun@onohara.to (maintainer)
Submitted by: myself (pgollucci@)
Changes: http://search.cpan.org/dist/Data-Throttler/Changes
|
|
Sun, 5 Jul 2009
|
[ 22:32 miwi ]
- Update to 0.03
PR: 136339
Submitted by: TERAMOTO Masahiro <markun@onohara.to> (maintainer)
|
|
Thu, 12 Jun 2008
|
[ 10:50 okazaki ]
Update to 0.02
PR: 124476
Submitted by: Masahiro Teramoto (maintainer)
|
|
Sat, 16 Feb 2008
|
[ 13:15 miwi ]
Data::Throttler helps solving throttling tasks like "allow a single IP
only to send 100 emails per hour".
It provides an optionally persistent data store to keep track of
what happened before and offers a simple yes/no interface to an application,
which can then focus on performing the actual task (like sending email)
or suppressing/postponing it.
WWW: http://search.cpan.org/dist/Data-Throttler/
PR: ports/120156
Submitted by: Masahiro Teramoto <markun at onohara.to>
|
Number of commits found: 18 |
As an Amazon Associate I earn from qualifying purchases.