| non port: devel/p5-Devel-Events-Objects/Makefile |
|
SVNWeb
|
Number of commits found: 18 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Thu, 1 Jun 2017
|
[ 23:51 sunpoet ]
Remove outdated PERL_LEVEL check
- Add NO_ARCH
|
|
Mon, 23 May 2016
|
[ 03:53 sunpoet ] (Only the first 10 of 65 ports in this commit are shown above. )
- Update to 1.302015
- Use real PORTVERSION
- Use CONFLICTS_INSTALL instead of CONFLICTS
- Update CONFLICTS_INSTALL
- Add NO_ARCH
Changes: http://search.cpan.org/dist/Test-Simple/Changes
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 24 Jun 2015
|
[ 16:29 adamw ] (Only the first 10 of 36 ports in this commit are shown above. )
Convert all p5-Test-use-ok dependencies to p5-Test-Simple, but only on
perl < 5.22. For www/p5-Catalyst-Controller-BindLex, change it from a
BUILD/RUN depend to TEST, as it is only used for the test target, and bump
PORTREVISION on that port.
|
|
Thu, 12 Mar 2015
|
[ 23:00 adamw ] (Only the first 10 of 229 ports in this commit are shown above. )
Some OCD cleanups on some of the perl@ ports.
- Remove dependencies in core
- Put testing depends in TEST_DEPENDS
- Remove unnecessary bsd.port.options.mk inclusions
- Remove checks for Perl versions that no longer exist in the ports tree
- Sort plists, some of which were so jumbled that I have to assume
the plist was randomized before committing
A lot of the plist changes in this commit are moving PERL5_MAN3 after
SITE_PERL. It's repo churn now, but it makes updating the ports later
far easier.
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 18 Nov 2014
|
[ 10:38 mat ] (Only the first 10 of 43 ports in this commit are shown above. )
Take miwi's old perl ports into perl@'s fold.
Sponsored by: Absolight
|
[ 09:37 bapt ] (Only the first 10 of 449 ports in this commit are shown above. )
Reset miwi's maintainership per his demand
Hope to see you back! Thank for all the work!
|
|
Wed, 29 Jan 2014
|
[ 09:19 az ] (Only the first 10 of 112 ports in this commit are shown above. )
- add stage support
Approved by: portmgr (blanket infrastructure)
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Mon, 9 Sep 2013
|
[ 15:01 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
|
Sat, 3 Mar 2012
|
[ 15:32 miwi ]
- Add missing depends
- Add TEST_DEPENDS
PR: 165109
Submitted by: swills@
|
|
Fri, 24 Sep 2010
|
[ 00:44 pgollucci ] (Only the first 10 of 158 ports in this commit are shown above. )
- %%SITE_PERL%%/auto and %%SITE_PERL%%/%%PERL_ARCH%%/auto
are part of lang/perl5* pkg-plist
- Bump PORTREVISIONs
With Hat: perl@
|
|
Fri, 24 Oct 2008
|
[ 09:34 miwi ]
The Perl 5 module Devel::Events::Objects provides an event generator
and a handler for Devel::Events, that facilitate leak checking.
There are two components of this module: Devel::Events::Generator::Objects,
and Devel::Events::Handler::ObjectTracker. The first one uses some
trickery to generate events for every object creation and destruction
in code loaded after it was loaded. The second one will listen on
these events, and track all currently living objects.
WWW: http://search.cpan.org/dist/Devel-Events-Objects/
|
Number of commits found: 18 |
As an Amazon Associate I earn from qualifying purchases.