| non port: devel/p5-File-Pid/Makefile |
|
SVNWeb
|
Number of commits found: 20 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 25 Jun 2021
|
[ 13:34 Po-Chuan Hsieh (sunpoet) ] 43169a9
devel/p5-File-Pid: Cosmetic change
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Fri, 15 Sep 2017
|
[ 08:58 mat ] (Only the first 10 of 2495 ports in this commit are shown above. )
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 19 Oct 2015
|
[ 20:22 sunpoet ]
- Add NO_ARCH
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 6 Jul 2014
|
[ 18:51 sunpoet ]
- Add LICENSE
- Silence post-patch: message
- Sort PLIST
- Reformat pkg-descr
|
|
Mon, 30 Jun 2014
|
[ 16:42 sunpoet ] (Only the first 10 of 108 ports in this commit are shown above. )
- Take maintainership
|
[ 05:51 eadler ] (Only the first 10 of 155 ports in this commit are shown above. )
multiple: reset gslin's maintainer
By request of Gea-Suan Lin <gslin@gslin.org> - reset ports to ports@FreeBSD.
Gea-Suan Lin's work is much appreciated.
Approved by: portmgr (implicit) (not really, skipping NO_STAGE check)
|
|
Wed, 29 Jan 2014
|
[ 10:33 az ] (Only the first 10 of 112 ports in this commit are shown above. )
- add stage support
Approved by: portmgr (blanket infrastructure)
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Mon, 9 Sep 2013
|
[ 17:31 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
|
Sat, 30 Jun 2012
|
[ 05:30 az ] (Only the first 10 of 35 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Approved by: portmgr@ (bapt@)
|
|
Sun, 10 Jun 2012
|
[ 18:42 swills ] (Only the first 10 of 639 ports in this commit are shown above. )
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
about for a while.
PR: ports/168208
Approved by: portmgr (miwi)
|
|
Fri, 13 Mar 2009
|
[ 13:11 arved ]
Fix unitialized value warning if program is called without an existing pid
PR: 130647
Submitted by: Alexander Kriventsov
Approved by: Gea-Suan Lin <gslin@gslin.org> (maintainer)
|
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
|
Tue, 3 Oct 2006
|
[ 00:53 clsung ]
Add p5-File-Pid 1.01, pid File Manipulation.
PR: ports/102892
Submitted by: Gea-Suan Lin <gslin at gslin.org>
|
Number of commits found: 20 |
As an Amazon Associate I earn from qualifying purchases.