13:02 Po-Chuan Hsieh (sunpoet) 

devel/p5-Mixin-Linewise: Update to 0.111

Changes:	https://metacpan.org/dist/Mixin-Linewise/changes

    776839f

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

20:44 Po-Chuan Hsieh (sunpoet) 

devel/p5-Mixin-Linewise: Update to 0.110

Changes:	https://metacpan.org/dist/Mixin-Linewise/changes

    d49f20a

13:40 Po-Chuan Hsieh (sunpoet) 

devel/p5-Mixin-Linewise: Update to 0.109

- Add LICENSE_FILE

Changes:	https://metacpan.org/dist/Mixin-Linewise/changes

    502c98df8

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:57 sunpoet 

Add NO_ARCH

 

13:06 des 

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

 

08:58 mat 

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

16:07 adamw 

Update to 0.108, and sort plist.

Changes: https://metacpan.org/changes/distribution/Mixin-Linewise

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

12:54 az 

- update to 0.106

Changes: http://search.cpan.org/dist/Mixin-Linewise/Changes

 

12:20 sunpoet 

- Update to 0.105

Changes:	http://search.cpan.org/dist/Mixin-Linewise/Changes

 

18:30 sunpoet 

- Update to 0.104

Changes:	http://search.cpan.org/dist/Mixin-Linewise/Changes

 

17:57 sunpoet 

- Update to 0.102

Changes:	http://search.cpan.org/dist/Mixin-Linewise/Changes

 

14:44 vanilla 

support STAGEDIR.

 

17:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

 

15:08 mat 

Update to 0.004

 

18:52 mat 

- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.

 

12:40 az 

Cleanup supporting perl version 5.8 and 5.10,
lang/perl5.8 and lang/5.10 will be removed from ports tree soon.

 

16:15 pgollucci 

- Revert ports/165605 as requested by portmgr@

Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.

PR:             ports/165605
Approved by:    portmgr (bapt)
Feature safe:   yes (I sure hope so)

18:45 pgollucci 

- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
  RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}

PR:             ports/165605
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

23:34 bapt 

give all my p5-* ports to perl team

11:22 culot 

- Fix LICENSE (Artistic 1 instead of Artistic 2)
- Pet portlint(1)

PR:             ports/161336
Submitted by:   Simon Olofsson <simon@olofsson.de>

17:19 bapt 

Add missing depenendcy
Make portlint happy

PR:             ports/158767
Submitted by:   milki <milki@rescomp.berkeley.edu>

22:30 bapt 

Get rid of md5 for all my ports.
while here add most of the licenses

17:31 bapt 

Change maintainer address to my new @FreeBSD.org

Approved by:    jadawin@ (co-mentor)

06:52 wen 

- Update to 0.003

PR:             ports/145215
Submitted by:   Bapt <baptiste.daroussin@gmail.com> (maintainer)

07:21 wen 

- Add missing DEPENDS

PR:             ports/142746
Submitted by:   Eugene Mychlo <myc@barev.net>
Approved by:    maintainer(timeout, > 2 weeks)

16:51 miwi 

With Mixin::Linewise::Readers and Mixin::Linewise::Writers, you can just write
a method to handle handles, and methods for handling strings and filenames are
added for you.

WWW:    http://search.cpan.org/~rjbs/Mixin-Linewise/

PR:             ports/132495
Submitted by:   bapt <baptiste.daroussin at gmail.com>