| non port: devel/pecl-vld/Makefile |
|
SVNWeb
|
Number of commits found: 42 |
|
Mon, 3 Oct 2022
|
[ 02:14 Po-Chuan Hsieh (sunpoet)  ]    f287458
devel/pecl-vld: Update to 0.18.0
Changes: https://pecl.php.net/package-changelog.php?package=vld
https://github.com/derickr/vld/commits/master
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 16 Jun 2022
|
[ 13:59 Po-Chuan Hsieh (sunpoet) ] 4cb08e3
devel/pecl-vld: Cosmetic change
|
|
Mon, 13 Jun 2022
|
[ 00:08 Muhammad Moinur Rahman (bofh) ] 214a6c5 (Only the first 10 of 81 ports in this commit are shown above. )
*/*: Ignore with php82
|
|
Tue, 21 Dec 2021
|
[ 18:47 Po-Chuan Hsieh (sunpoet) ] e495c9f
devel/pecl-vld: Update to 0.17.2
Changes: https://pecl.php.net/package-changelog.php?package=vld
|
|
Tue, 4 May 2021
|
[ 19:14 Po-Chuan Hsieh (sunpoet) ] be476b4
devel/pecl-vld: Update to 0.17.1
- Take maintainership
Changes: https://pecl.php.net/package-changelog.php?package=vld
|
[ 16:57 Rene Ladan (rene) ] 727adba (Only the first 10 of 290 ports in this commit are shown above. )
*: reset miwi's ports after safekeeping his ports bit.
Hat: portmgr-secretary
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 29 Dec 2020
|
[ 09:14 antoine ]   (Only the first 10 of 28 ports in this commit are shown above. )
Ignore with PHP 8.0
Reported by: pkg-fallout
|
|
Fri, 6 Mar 2020
|
[ 17:05 joneum ] (Only the first 10 of 163 ports in this commit are shown above. )
hand over Maintainership to miwi
Sponsored by: Netzkommune GmbH
|
|
Tue, 4 Feb 2020
|
[ 13:44 joneum ]
Update to 0.17.0
Sponsored by: Netzkommune GmbH
|
|
Mon, 17 Jun 2019
|
[ 07:22 joneum ]
Update to 0.16.0
Changelog:
- Preliminary PHP 7.4 support
Sponsored by: Netzkommune GmbH
|
|
Sat, 5 Jan 2019
|
[ 15:47 rene ] (Only the first 10 of 42 ports in this commit are shown above. )
Remove stale IGNORE_WITH_PHP=56 values.
Reminded by: sunpoet
|
|
Sat, 15 Dec 2018
|
[ 01:19 joneum ]
Add "IGNORE_WITH_PHP= 56"
This Port doesn't build with PHP 56
|
|
Mon, 10 Dec 2018
|
[ 17:02 joneum ]
Update to 0.15.0
Changelog:
- Preliminary PHP 7.3 support
-Add LICENSE_FILE
-Remove Ignore for PHP 7.3
Sponsored by: Netzkommune GmbH
|
|
Thu, 6 Dec 2018
|
[ 11:22 rene ] (Only the first 10 of 168 ports in this commit are shown above. )
Remove version 7.0 from the IGNORE_WITH_PHP list.
|
|
Fri, 12 Oct 2018
|
[ 06:23 antoine ] (Only the first 10 of 22 ports in this commit are shown above. )
Those ports are not compatible with php 7.3
Reported by: pkg-fallout
|
|
Tue, 16 May 2017
|
[ 13:37 joneum ] (Only the first 10 of 355 ports in this commit are shown above. )
- Update maintainer address
Reviewed by: miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D10755
|
|
Mon, 10 Apr 2017
|
[ 15:08 mat ] (Only the first 10 of 152 ports in this commit are shown above. )
Convert all PECL ports to USES=php:pecl.
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D10281
|
|
Mon, 26 Dec 2016
|
[ 21:40 rakuco ]
Update to 0.14.0.
PR: 215512
Submitted by: Jochen Neumeister <joneum@bsdproject.de> (maintainer)
|
|
Thu, 22 Dec 2016
|
[ 12:00 wen ] (Only the first 10 of 25 ports in this commit are shown above. )
- Pass maintainership to submitter
PR: 215489
Submitted by: joneum@bsdproject.de
|
|
Wed, 3 Aug 2016
|
[ 12:47 mat ] (Only the first 10 of 381 ports in this commit are shown above. )
Don't use extension.ini any more, and have each extension install in its
file, so the order remains the same.
Every PHP (or Zend) extension now installs its own .ini file in
/usr/local/etc/php. A PHP extension will be automatically activated
when installed. The order into which extensions are loaded is
automatically guessed. In some very rare cases, the guess will be
wrong, and PHP_MOD_PRIO will need to be set. Refer to the USES=php
section of the Porter's Handbook for more information.
Convert ports touching etc/php/extensions.ini manually, or telling the
OP to do it.
And finally, bump PORTREVISION for all php extensions.
PR: 210697
Submitted by: mat
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D7022
|
|
Mon, 25 Jul 2016
|
[ 20:01 rene ] (Only the first 10 of 317 ports in this commit are shown above. )
Reset miwi@'s ports, he stepped down from the Ports Team.
With hat: portmgr-secretary
|
|
Tue, 28 Jun 2016
|
[ 14:00 mat ] (Only the first 10 of 246 ports in this commit are shown above. )
Convert USE_PHP*=yes into USES=php*
PR: 210529
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D6936
|
|
Thu, 18 Feb 2016
|
[ 14:47 miwi ] (Only the first 10 of 114 ports in this commit are shown above. )
- Ignore php70
- While here remove old php gruft
|
|
Thu, 26 Nov 2015
|
[ 14:39 miwi ] (Only the first 10 of 47 ports in this commit are shown above. )
- Take Maintainership
Approved by: mat (mentor)
|
|
Tue, 24 Feb 2015
|
[ 15:23 vanilla ] (Only the first 10 of 17 ports in this commit are shown above. )
bsd.php.mk handle ${STRIP} already, remove prev patches.
|
[ 04:09 vanilla ]
strip binary.
|
|
Sat, 13 Dec 2014
|
[ 18:30 pawel ]
- Update to version 0.13.0, now comaptible with php56 [1]
- Clarify LICENSE
- Convert to USES=tar:tgz
PR: 195423 [1]
Submitted by: Gasol Wu <gasol.wu@gmail.com> [1]
|
|
Tue, 18 Nov 2014
|
[ 09:37 bapt ] (Only the first 10 of 449 ports in this commit are shown above. )
Reset miwi's maintainership per his demand
Hope to see you back! Thank for all the work!
|
|
Mon, 13 Oct 2014
|
[ 13:20 mat ] (Only the first 10 of 11 ports in this commit are shown above. )
These do not build with php 5.6.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 17 Nov 2013
|
[ 08:26 antoine ]
- Update to 0.12.0
- Add LICENSE
- Stage support
PR: ports/182531
Submitted by: Gasol Wu
Approved by: maintainer timeout (1.5 month)
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Mon, 4 Feb 2013
|
[ 02:31 miwi ]
- Update to 0.11.2
- Convert Header
|
|
Thu, 17 May 2012
|
[ 15:19 miwi ]
- Update to 0.11.1
|
|
Sat, 5 Jun 2010
|
[ 17:06 miwi ]
- Update to 0.10.1
|
|
Fri, 28 Aug 2009
|
[ 18:54 miwi ] (Only the first 10 of 18 ports in this commit are shown above. )
- Take maintainership
|
[ 17:37 linimon ] (Only the first 10 of 221 ports in this commit are shown above. )
Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.
Hat: portmgr
|
|
Thu, 1 May 2008
|
[ 08:54 chinsan ]
- Update to 0.9.1.
|
|
Sun, 16 Dec 2007
|
[ 04:42 chinsan ]
- Update to 0.9.0
|
|
Tue, 6 Mar 2007
|
[ 07:31 rafan ]
Add pecl-vld 0.8.0, dump the internal representation of PHP scripts.
PR: ports/109857
Submitted by: chinsan
|
Number of commits found: 42 |
As an Amazon Associate I earn from qualifying purchases.