notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

non port: devel/poslib/Makefile

Number of commits found: 27

Monday, 29 Apr 2019
20:50 tobik search for other commits by this committer
Deprecate devel/poslib

It is unmaintained upstream (last release in 2004) and the only
consumer was removed 5 years ago.
Original commitRevision:500436 
Tuesday, 12 Jan 2016
16:20 amdmi3 search for other commits by this committer
Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket
Original commitRevision:405891 
Tuesday, 17 Nov 2015
21:31 amdmi3 search for other commits by this committer
- Add LICENSE_FILE
- Switch to options helpers
- Regenerate patches with `make makepatch`
Original commitRevision:401827 
Thursday, 28 Aug 2014
14:58 tijl search for other commits by this committer
Convert to USES=libtool and INSTALL_TARGET=install-strip
Original commitRevision:366410 
Friday, 20 Dec 2013
12:15 pawel search for other commits by this committer
- Fix build with clang
- Support CXXFLAGS properly
- Add LICENSE
- Support staging

PR:		ports/184849
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>
Original commitRevision:337002 
Friday, 20 Sep 2013
17:13 bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
Original commitRevision:327724 
Thursday, 14 Feb 2013
09:42 gahr search for other commits by this committer
- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: devel)

Approved by:	portmgr
Original commitRevision:312209 
Saturday, 4 Dec 2010
07:34 ade search for other commits by this committer
Sync to new bsd.autotools.mk
Original commit
Saturday, 22 Aug 2009
00:18 amdmi3 search for other commits by this committer
- Switch SourceForge ports to the new File Release System: categories starting
with D
Original commit
Sunday, 2 Aug 2009
19:36 mezz search for other commits by this committer
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
Original commit
Thursday, 21 Aug 2008
06:18 rafan search for other commits by this committer
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)
Original commit
Sunday, 27 Jul 2008
04:30 linimon search for other commits by this committer
Reset sergei@ due to maintainer-timeouts and no response to email.

Hat:            portmgr
Original commit
Saturday, 19 Apr 2008
17:56 miwi search for other commits by this committer
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Original commit
Thursday, 1 Feb 2007
02:42 kris search for other commits by this committer
Use libtool port instead of included version to avoid objformat a.out botch
Original commit
Thursday, 23 Feb 2006
10:40 ade search for other commits by this committer
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Original commit
Tuesday, 15 Nov 2005
06:52 ade search for other commits by this committer
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Original commit
Monday, 29 Aug 2005
12:27 sergei search for other commits by this committer
- Update to 1.0.6
Original commit
Tuesday, 12 Apr 2005
03:26 obrien search for other commits by this committer
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
Original commit
Monday, 11 Apr 2005
08:04 obrien search for other commits by this committer
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
Original commit
Monday, 11 Oct 2004
07:59 sergei search for other commits by this committer
- Unbreak dns/posadis and its dependency devel/poslib
  with the new PTHREAD_LIBS in 5.x and -CURRENT by
  changing USE_INC_LIBTOOL_VER to USE_LIBTOOL_VER
  (this also removes .la files)
- Bump PORTREVISION due to changed packages

Suggested by:   marcus
Approved by:    portmgr (marcus)
Original commit
Wednesday, 6 Oct 2004
08:52 sergei search for other commits by this committer
- Unbreak dns/posadis build under 5.x and -CURRENT
  by upgrading to the latest version (0.60.5)
- Update its dependency devel/poslib to 1.0.5 (prerequisite)

PR:             ports/72308
Submitted by:   sergei
Approved by:    portsmgr (will)
Original commit
Sunday, 14 Mar 2004
06:17 ade search for other commits by this committer
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Original commit
Thursday, 23 Oct 2003
05:42 sergei search for other commits by this committer
Change to my @FreeBSD.org address.

Approved by:    krion
Original commit
Thursday, 9 Oct 2003
07:22 osa search for other commits by this committer
Fix building in -STABLE.

Submitted by:   Sergei Kolobov <sergei@kolobov.com> (maintainer)
PR:             57786
Original commit
Wednesday, 8 Oct 2003
07:23 erwin search for other commits by this committer
- This port *requires* -O0 -funsigned-char in CXXFLAGS;
  remove ability for user to specify CXXFLAGS;
  This unbreaks poslib's functionality
- Bump PORTREVISION

PR:             57718
Submitted by:   maintainer
Original commit
Monday, 6 Oct 2003
17:58 krion search for other commits by this committer
- Update to 1.0.1
- Disable any optimizations as it causes problems under
  FreeBSD, according to the author
- Install examples

PR:             57649
Submitted by:   maintainer
Original commit
Saturday, 30 Aug 2003
00:56 edwin search for other commits by this committer
[NEW PORT] devel/poslib: Posadis C++ DNS library

        Poslib is a portable C++ DNS library, a part of Posadis
        project.  It consists of two parts: a client library and a
        server library.

        Using the client library, you can simply develop applications
        that use the Domain Name System (DNS). It includes many
        functions for resolving, domain-name manipulation and
        Resource Record (RR) creation.

        The server library, based on the client core, can be used
        to develop DNS servers. By implementing a query entry-point
        function using the Poslib library of functions, you can
        easily create DNS servers, without worrying about low-level
        details such as DNS message compilation, domain-name
        compression and UDP/TCP transmission.

        Author: Meilof Veeningen <meilof@users.sourceforge.net>
        WWW:    http://posadis.sourceforge.net/projects/poslib.php

PR:             ports/55195
Submitted by:   Sergei Kolobov <sergei@kolobov.com>
Original commit

Number of commits found: 27