notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.
New feature planned: get notified when the package is available. Now is the time to contribute ideas/suggestions.
non port: devel/py-notify/Makefile

Number of commits found: 26

Thursday, 28 May 2020
08:43 danfe search for other commits by this committer
Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 6).
Original commitRevision:536752 
Thursday, 2 Apr 2020
14:27 antoine search for other commits by this committer
Deprecate devel/py-notify
Original commitRevision:530378 
Friday, 8 Nov 2019
11:39 tobik search for other commits by this committer
devel: Add missing USES={gl,gnome,php,sdl}
Original commitRevision:517048 
Monday, 19 Feb 2018
11:10 antoine search for other commits by this committer
Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA
Original commitRevision:462307 
Thursday, 30 Nov 2017
15:50 mat search for other commits by this committer
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464
Original commitRevision:455210 
Friday, 1 Apr 2016
14:00 mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Original commitRevision:412346 
Sunday, 2 Aug 2015
15:03 tijl search for other commits by this committer
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine
Original commitRevision:393429 
Monday, 20 Oct 2014
16:04 mva search for other commits by this committer
- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)
Original commitRevision:371280 
Wednesday, 23 Apr 2014
13:25 tijl search for other commits by this committer
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)
Original commitRevision:351936 
Friday, 11 Apr 2014
14:44 bapt search for other commits by this committer
Support stage
Original commitRevision:350967 
Monday, 13 Jan 2014
21:00 rene search for other commits by this committer
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)
Original commitRevision:339634 
Tuesday, 29 Oct 2013
17:05 kwm search for other commits by this committer
Restrict python to -2.7

Submitted by:	mva@
Original commitRevision:331973 
Friday, 20 Sep 2013
17:13 bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
Original commitRevision:327724 
Tuesday, 3 Sep 2013
08:49 bapt search for other commits by this committer
Add an explicit dependency on pkgconf
Original commitRevision:326129 
Monday, 31 Dec 2012
17:03 mezz search for other commits by this committer
Remove the created by me and update those header at the same time. I never
care about those header, so you even can claim that those were created by
you instead of me.
Original commitRevision:309763 
Friday, 1 Jun 2012
05:26 dinoex search for other commits by this committer
- update png to 1.5.10
Original commit
Tuesday, 23 Aug 2011
18:39 kwm search for other commits by this committer
Chase libnotify, libproxy and webkit-gtk2 shlib changes, and fix build where
needed.
Original commit
Thursday, 11 Aug 2011
19:20 kwm search for other commits by this committer
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Original commit
Sunday, 28 Mar 2010
06:47 dinoex search for other commits by this committer
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Original commit
Friday, 5 Feb 2010
11:46 dinoex search for other commits by this committer
- update to jpeg-8
Original commit
Friday, 31 Jul 2009
13:57 dinoex search for other commits by this committer
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin
Original commit
Friday, 6 Jun 2008
13:21 edwin search for other commits by this committer
Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)
Original commit
Sunday, 20 Apr 2008
22:07 mezz search for other commits by this committer
- Remove ${WRKSRC}/src/pynotify.c to get it regenerates this file properly,
  which it will adding attach_to_status_icon() and probably other functions to
  make other apps work correct.
- Portlint clean.

PR:             ports/122934
Submitted by:   David <david@trucs.org>
Original commit
Saturday, 19 Apr 2008
17:56 miwi search for other commits by this committer
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Original commit
Saturday, 19 May 2007
20:32 flz search for other commits by this committer
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
Original commit
Tuesday, 12 Dec 2006
19:38 mezz search for other commits by this committer
A python bindings for libnotify.

WWW: http://www.galago-project.org/
Original commit

Number of commits found: 26