| non port: devel/py-pycallgraph/Makefile |
|
SVNWeb
|
Number of commits found: 29 |
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3)  ]    77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 24 Jul 2021
|
[ 19:13 Li-Wen Hsu (lwhsu) ] f4a3a6e
devel/py-pycallgraph: Update to 1.0.1
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ]   (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Wed, 10 Apr 2019
|
[ 06:18 antoine ] (Only the first 10 of 399 ports in this commit are shown above. )
Bump a few PORTREVISIONs after r498529
With hat: portmgr
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 18 Apr 2017
|
[ 18:26 miwi ] (Only the first 10 of 14 ports in this commit are shown above. )
- Fix Shebangs
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 20 Oct 2014
|
[ 16:04 mva ] (Only the first 10 of 564 ports in this commit are shown above. )
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit)
|
|
Thu, 3 Jul 2014
|
[ 23:57 adamw ] (Only the first 10 of 47 ports in this commit are shown above. )
Remove NOPORTDOCS and NOPORTEXAMPLES.
Approved by: portmgr (blanket)
|
|
Fri, 18 Apr 2014
|
[ 07:30 lwhsu ]
- Staging
- Add LICENSE
- Pet portlint
PR: ports/188545
Submitted by: Bartek Rutkowski <ports@robakdesign.com>
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Tue, 28 Dec 2010
|
[ 07:54 lwhsu ]
- Use COPYTREE for installing example files
- Install manual page and respect NO_INSTALL_MANPAGES
- Drop MD5 checksum
Submitted by: ohauer (earlier patch)
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Tue, 15 Jul 2008
|
[ 03:36 lwhsu ]
- Update to 0.5.1
PR: ports/125396
Submitted by: Wen heping <wenheping AT gmail.com>
|
|
Fri, 6 Jun 2008
|
[ 13:21 edwin ] (Only the first 10 of 367 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Mon, 19 May 2008
|
[ 23:45 lwhsu ]
- Fix typo, this fixes the NOPORTEXAMPLES knob
|
|
Thu, 13 Dec 2007
|
[ 08:12 lwhsu ]
- Update to 0.4.1
|
|
Sat, 4 Aug 2007
|
[ 11:41 gabor ] (Only the first 10 of 291 ports in this commit are shown above. )
- Remove the DESTDIR modifications from individual ports as we have a new,
fully chrooted DESTDIR, which does not need such any more.
Sponsored by: Google Summer of Code 2007
Approved by: portmgr (pav)
|
|
Mon, 25 Jun 2007
|
[ 18:33 lwhsu ]
- Update to 0.4.0
- Add examples
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Wed, 4 Apr 2007
|
[ 08:49 lwhsu ] (Only the first 10 of 29 ports in this commit are shown above. )
- Change to my FreeBSD.org email
Approved by: clsung (mentor)
|
|
Thu, 15 Feb 2007
|
[ 11:48 miwi ]
- Update to 0.3.0
PR: 109196
Submitted by: Li-Wen Hsu <lwhsu@lwhsu.org> (maintainer)
|
|
Wed, 14 Feb 2007
|
[ 03:44 clsung ]
- Update to 0.2.0
PR: ports/109032
Submitted by: maintainer (Li-Wen Hsu)
|
|
Sat, 10 Feb 2007
|
[ 13:57 miwi ]
Python Call Graph uses GraphViz to generate call graphs from one execution of
your Python code. It's very easy to use and can point out possible problems
with your code execution.
WWW: http://pycallgraph.slowchop.com/
PR: ports/108977
Submitted by: Li-Wen Hsu <lwhsu at lwhsu.org>
|
Number of commits found: 29 |
As an Amazon Associate I earn from qualifying purchases.