11:38 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update 2.11.0 → 2.11.1

    142e896

21:20 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update 2.10.0 → 2.11.0

- Switch to GitHub as PyPI tarball does not contain required test files
- Update WWW

    09d14af

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

19:11 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update 2.9.1 → 2.10.0

    003bb49

17:23 Dmitry Marakasov (amdmi3) 

*/*: switch my ports from USES=pytest to USE_PYTHON=pytest

Suggested by:	sunpoet

    f8e9da8

20:30 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: switch to pytest

    671ccbc

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

12:36 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update 2.9.0 → 2.9.1

    dded166

15:15 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update 2.8.0 → 2.9.0

    e7bf967

17:37 Dmitry Marakasov (amdmi3) 

devel/py-pycodestyle: update to 2.8.0

    3c77687

23:19 Dmitry Marakasov (amdmi3) 

Remove useless Created by: headers mentioning me

    5823922

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

14:57 amdmi3 

- Update to 2.7.0

 

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

22:15 amdmi3 

- Update to 2.6.0

 

06:18 antoine 

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

 

16:25 amdmi3 

- Update to 2.5.0

PR:		235396

 

18:35 amdmi3 

- Update to 2.4.0

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

15:01 amdmi3 

- Update to 2.3.1
- Add PyPi WWW

PR:		217135
Submitted by:	amdmi3

 

14:34 amdmi3 

- Enable concurrent installs

PR:		216581
Submitted by:	john@saltant.com

 

13:41 amdmi3 

pycodestyle is a tool to check your Python code against some of the
style conventions in PEP 8.

This package used to be called pep8 but was renamed to pycodestyle
to reduce confusion

WWW: https://pycodestyle.readthedocs.io/en/latest/