| non port: devel/py-pydenticon/Makefile |
|
SVNWeb
|
Number of commits found: 16 |
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3)  ]    77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 1 Feb 2021
|
[ 19:27 sunpoet ]  
Remove PY_PILLOW
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ] (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Tue, 24 Mar 2020
|
[ 19:54 antoine ] (Only the first 10 of 87 ports in this commit are shown above. )
Convert the tree to use PY_PILLOW
With hat: portmgr
Originally submitted by: kai
|
|
Mon, 24 Feb 2020
|
[ 11:36 kai ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jun 2018
|
[ 17:05 mat ] (Only the first 10 of 1617 ports in this commit are shown above. )
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
|
Tue, 17 Apr 2018
|
[ 19:16 sunpoet ]
Update to 0.3.1
- Allow concurrent installation (USE_PYTHON=concurrent)
- Take maintainership
Changes: https://github.com/azaghal/pydenticon/blob/master/docs/releasenotes.rst
|
|
Mon, 16 Apr 2018
|
[ 21:33 feld ] (Only the first 10 of 19 ports in this commit are shown above. )
Reset MAINTAINER
Approved by: maintainer (private communications)
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 2 Nov 2016
|
[ 22:45 mat ] (Only the first 10 of 110 ports in this commit are shown above. )
Cleanup no longer needed CHMOD usage after r424898.
PR: 213743
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 31 Jan 2016
|
[ 08:18 antoine ]
Allow use as a regular user, some files were unreadable
|
|
Fri, 8 Jan 2016
|
[ 04:56 koobs ]
[NEW] devel/py-pydenticon: Library for generating identicons - an enhanced port
of Sigil
Pydenticon is a small utility library that can be used for deterministically
generating identicons based on the hash of provided data.
WWW: https://github.com/azaghal/pydenticon
PR: 205914
Submitted by: Brendan Molloy <brendan+freebsd@bbqsrc.net>
|
Number of commits found: 16 |
As an Amazon Associate I earn from qualifying purchases.