non port: devel/py-qt4-test/Makefile |
Number of commits found: 39 |
Sunday, 2 Dec 2018
|
15:41 rene
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
Thursday, 22 Nov 2018
|
20:18 tcberner
pyqt: Change install directories for Python flavor support
* PyQt could not be installed for multiple Python versions at
the same time, as there were conflicting files.
This patch creates Python-version versioned directories for
all these, and further installs binaries with a version number.
* Note, there might be some hickups for software that depends on
on of the .so's provided by PyQt5, which might not be found
anymore autmotically, and maybe need some LD-flaggery.
* Update PyQt5 to 5.10.1
* Mark www/py-qt5-webengine broken. It is unforuntately no longer
compatible with the old qt5-webengine-5.9.4 we ship.
PR: 232745
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D8714
|
Thursday, 28 Jun 2018
|
17:39 tcberner
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
Sunday, 29 Apr 2018
|
16:19 tcberner
Update the QScintilla2 ports to 2.10.4
|
Monday, 12 Mar 2018
|
18:06 tcberner
Update py-sip to 4.19.8 and qscintilla2 to 2.10.3
PR: 226487
Exp-run by: antoine
|
Sunday, 18 Feb 2018
|
09:55 rakuco
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
|
Thursday, 30 Nov 2017
|
15:50 mat
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464
|
Saturday, 28 May 2016
|
12:32 pi
devel/py-qt4-core cleanups in py-qt4-*
- Cleanup work on the py-qt4 ports, leading to a reduced runtime footprint.
PR: 209283
Submitted by: groot@kde.org (kde), rakuco
|
Friday, 1 Apr 2016
|
14:00 mat
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Tuesday, 8 Dec 2015
|
16:49 rakuco
PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.
In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.
Ports wishing to depend on PyQt4 ports can now do the following:
USES= pyqt:4
USE_PYQT= foo bar_build baz_run
Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.
Even though this patch touches files in many different ports, the goal is
for it to be a no-op from an end-user perspective (so that the basic
infrastructure is landed before the other, riskier changes): no dependencies
have been changed, PyQt/SIP/QScintilla have not been upgraded and the plists
should remain exactly the same, since PYQT_SIPDIR currently contains the
same value that used to be hardcoded in the plists.
Huge thanks to Guido Falsi (madpilot@) for spearheading most of the work: he
took the initiative to work on PyQt5 and sent D2910 to Phabricator with the
original version of this patch. Tobias Berner (tcberner@gmail.com) later
applied it to kde@'s experimental area51 repositories and did some more work
on it.
|
Wednesday, 4 Mar 2015
|
23:20 rakuco
Update PyQt and its dependencies.
* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.
This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.
Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!
PR: 198016
Submitted by: Tobias Berner <tcberner@gmail.com>
|
Wednesday, 10 Sep 2014
|
20:50 gerald
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Wednesday, 23 Jul 2014
|
19:53 rakuco
Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.
... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.
This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:
- General, belated changes:
* Use OPTIONS helpers wherever possible, stop including
<bsd.port.options.mk> when not necessary, stop checking for
${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
add options such as DOCS and/or DEBUG where they were only checked for.
- QScintilla ports:
* Drop the API option from py-qt4-qscintilla2. It had been broken ever
since staging support was added, and its existence does not make much
sense: QScintilla is a hard dependency regardless of the state of this
option anyway, they all come from the same tarball and the configuration
script assumes the .api file will always be installed.
- PyQt ports:
* The configure.py patch shared by all PyQt ports has been trimmed down to
the minimum. Changes for Qt3 compatibility or for things that are just
not needed anymore have been removed.
* Several post-configure targets in the PyQt ports have been removed, as
they had no effect on the way the ports were built whatsoever.
* In some cases, instead of calling Python's py_compile.py on `ls *.py
*/*.py */*/*.py` to generate .pyc and .pyo files, we just call
compileall.py, which is made for this kind of task.
* The patch + sed hack to build py-qt4-dbussupport has been replaced by
only extracting the dbus/ directory for that port and excluding it from
all others.
* Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
portion of all PyQt Makefiles were very similar and contained a lot of
boilerplate code that can be shared among all of them since they all
come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
that, when set, automatically sets several common variables and the
do-configure target for a port. This allows us to considerably reduce
the size of all the py-qt4-* Makefiles.
* To make the above possible and also to allow us to use as many OPTIONS
helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
That's what it was used for anyway.
PR: 191990
|
Sunday, 13 Jul 2014
|
23:09 bapt
Modernize LIB_DEPENDS
With hat: portmgr
|
Saturday, 7 Jun 2014
|
09:39 rakuco
Add explicit dependency on qt4-gui.
This is similar to r356888, in that PyQt's configure.py builds py-qt4-test
with QtGui's libraries (even though, contrary to qt4-sql, it is not used at
configuration time). Using QtGui defines QT_GUI_LIB, which makes the QtTest
headers pull in QtGui ones. QtGui comes for free indirectly when the API
option is set, but the build fails otherwise:
c++ -c -O2 -pipe -fno-strict-aliasing -fPIC -O2 -Wall -W -pthread
-D_THREAD_SAFE -DNDEBUG -DQT_NO_DEBUG -DQT_TEST_LIB -DQT_GUI_LIB -DQT_CORE_LIB
-I. -I/usr/local/include/python2.7 -I/usr/local/share/qt4/mkspecs/default
-I/usr/local/include/qt4/QtTest -I/usr/local/include/qt4/QtGui
-I/usr/local/include/qt4/QtCore -I/usr/local/include/qt4 -I/usr/local/include -o
sipQtTestQTest.o sipQtTestQTest.cpp
In file included from
/wrkdirs/usr/ports/devel/py-qt4-test/work/PyQt-x11-gpl-4.10.3/sip/QtTest/qtestkeyboard.sip:31:
/usr/local/include/qt4/QtTest/qtestkeyboard.h:56:10: fatal error:
'QtGui/qapplication.h' file not found
PR: 183706
MFH: 2014Q2
|
Monday, 13 Jan 2014
|
21:00 rene
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat)
|
Tuesday, 15 Oct 2013
|
21:52 rakuco
Update SIP to 4.15.2 and PyQt to 4.10.3.
This commit also adds proper staging support to all the ports being updated.
In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.
|
Friday, 20 Sep 2013
|
17:13 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
Sunday, 3 Feb 2013
|
18:16 makc
KDE/FreeBSD team presents:
SIP 4.14.3
QScintilla 2.7
PyQt 4.9.6
The area51 repository features commits by jhale and myself.
Changes:
- Trim Makefile header
- Convert to new option framework
|
Saturday, 9 Jun 2012
|
00:41 makc
Merge changes from area51 repository (SVN commit 8197 by avilla):
- Remove SIPFILES option, some ports (e.g., pykde4) require the files
to be installed.
- Remove DEBUG and TRACING options, and merge them under WITH_DEBUG.
|
Wednesday, 6 Jun 2012
|
06:44 miwi
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
Friday, 1 Jun 2012
|
05:26 dinoex
- update png to 1.5.10
|
Friday, 25 May 2012
|
01:49 makc
KDE/FreeBSD team presents update for PyQt ports:
- sip to 4.13.2
- PyQt4 to 4.9.1
- QScintilla to 2.6.1
|
Tuesday, 24 Jan 2012
|
23:40 avilla
- Pet Tinderbox and friends.
OPTIONSFILE must be set using ?= to allow overriding.
PR: 163743
PR: 163744
PR: 163745
PR: 163746
Submitted by: A.J. Kehoe IV (Nanoman) <vOo4vyPj@nanoman.ca>
|
Sunday, 16 Oct 2011
|
22:50 avilla
- Update PyQt4 to 4.8.5.
- Update SIP to 4.12.4.
- Use common DISTINFO_FILEs.
|
Tuesday, 11 May 2010
|
10:43 fluffy
- The FreeBSD KDE team is pleased to announce SIP-4.10.2, PyQt-4.7.3
and QScintilla-2.4.3 for FreeBSD.
With hat on: kde@
|
Sunday, 28 Mar 2010
|
06:47 dinoex
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Friday, 5 Feb 2010
|
11:46 dinoex
- update to jpeg-8
|
Friday, 27 Nov 2009
|
00:10 miwi
- Update py-qt4* to 4.6.2
- Update py-sip to 4.9.3
The KDE FreeBSD team would like to say thanks to all the helpers
and submitters.
Tested by: pointyhat-exp-run (myself)
|
Tuesday, 4 Aug 2009
|
19:18 miwi
- Update py-qt4 to py-qt4.5.4
- Update qscintilla-2* to 2.4
- Update py-sip to 4.8.2
- Update py-kde to 1.16.3
- Update py-qt to 1.18.1
The KDE FreeBSD team would like to say thanks to all the helpers
and submitters
New Port:
devel/py-qt4-scripttools
|
Saturday, 14 Feb 2009
|
22:58 makc
Update PyQt4 ports to 4.4.4, new ports:
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit
Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.
Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.
PR: based on ports/130219
Submitted by: Dima Panov" <fluffy at fluffy.khv.ru>
|
Friday, 25 Jul 2008
|
22:24 miwi
The first iteration of the py-qt4-* ports had a snapshot date as its
PORTVERSION. After that the PORTVERSION became 4.foo. Because this is
numerically lower than before, the PORTEPOCH should have been bumped.
Poked by: kris@
PR: 125814
Submitted by: Danny Pansters <danny@ricin.com> (maintainer)
|
Friday, 6 Jun 2008
|
13:21 edwin
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Thursday, 20 Mar 2008
|
12:40 miwi
- Update to 4.3.3
- Configure.py now has a flag to specify component, patch is now simpler
- Update qscintilla2 so version where used
- Use bsd.pyqt.mk
Submitted by: Danny Pansters <danny@ricin.com> (maintainer via private mail)
|
Tuesday, 2 Oct 2007
|
09:58 miwi
- Update to 4.3.1
Submitted by: Danny Pansters <danny@ricin.com> (maintainer)
|
Thursday, 13 Sep 2007
|
18:15 miwi
- Update to PyQt-4.3
Submitted by: Danny Pansters <danny@ricin.com> (maintainer via privat mail)
|
Saturday, 19 May 2007
|
20:32 flz
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Tuesday, 17 Apr 2007
|
20:12 miwi
- Update to 4.2
PR: Danny Pansters <danny@ricin.com> (maintainer via privat mail)
|
Tuesday, 27 Mar 2007
|
10:05 miwi
PyQt4 is a set of Python bindings for Trolltech's Qt4 application framework.
This package provides the QTest module.
WWW: http://www.riverbankcomputing.co.uk/pyqt/
PR: ports/109631
Submitted by: Danny Pansters <danny at ricin.com>
|
Number of commits found: 39 |