| non port: devel/py-six/Makefile |
|
SVNWeb
|
Number of commits found: 32 |
|
Mon, 20 Feb 2023
|
[ 17:39 Antoine Brodin (antoine)  ]    7e988aa
devel/py-six: py27 flavor is no longer needed by the ports tree
|
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3) ] 77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Jun 2022
|
[ 16:36 Po-Chuan Hsieh (sunpoet) ] 1595b62
devel/py-six: Convert to USE_PYTHON=pytest
- Add TEST_DEPENDS
|
|
Thu, 6 May 2021
|
[ 09:45 Kirill Ponomarev (krion) ] 1551d74
devel/py-six: update to 1.16.0
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 4 Feb 2021
|
[ 14:35 mat ]   (Only the first 10 of 22 ports in this commit are shown above. )
Those ports are allowed to build a 2.7 flavor, for now.
|
|
Mon, 17 Aug 2020
|
[ 23:44 dbaio ]
devel/py-six: Update to 1.15.0
Changelog: https://github.com/benjaminp/six/blob/1.15.0/CHANGES
PR: 248675
Submitted by: daniel.engberg.lists@pyret.net
MFH: 2020Q3 (performance fix)
|
|
Mon, 27 Jan 2020
|
[ 20:10 sunpoet ]
Update to 1.14.0
Changes: https://github.com/benjaminp/six/blob/master/CHANGES
|
|
Mon, 13 Jan 2020
|
[ 17:49 sunpoet ]
Update to 1.13.0
- Update WWW
Changes: https://github.com/benjaminp/six/blob/master/CHANGES
|
|
Wed, 12 Dec 2018
|
[ 01:26 wen ]
- Update to 1.12.0
|
|
Wed, 20 Jun 2018
|
[ 17:05 mat ] (Only the first 10 of 1617 ports in this commit are shown above. )
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 18 Sep 2017
|
[ 17:49 sunpoet ]
Update to 1.11.0
Changes: https://github.com/benjaminp/six/blob/master/CHANGES
|
|
Thu, 2 Mar 2017
|
[ 16:55 skreuzer ]
Python 3 variant of devel/py-six
PR: 217473
Submitted by: Danilo G. Baio <dbaio@bsd.com.br>
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 7 Mar 2016
|
[ 04:36 koobs ]
devel/py-six: Update to 1.10.0, Modernize
- Update PORTVERSION and distinfo checksum (1.10.0)
- Enable NO_ARCH (architecture independent)
- Update test target
Changes:
https://bitbucket.org/gutworth/six/src/default/CHANGES
Approved by: koobs (python, with hat)
|
|
Fri, 26 Jun 2015
|
[ 14:46 koobs ]
devel/py-six: Update to 1.9.0
Approved by: python (with hat)
|
|
Fri, 26 Sep 2014
|
[ 12:26 wg ]
devel/py-six: update to 1.8.0
|
|
Mon, 25 Aug 2014
|
[ 09:44 koobs ]
devel/py-six: Add LICENSE_FILE and QA entries
- Add LICENSE_FILE
- Add TEST_DEPENDS and regression-test target
- pkg-descr: Strip trailing slash from WWW: URL
|
|
Wed, 20 Aug 2014
|
[ 12:42 rm ]
devel/py-six: update 1.7.3; pass maintainership to python@
Requested by: koobs
|
|
Tue, 7 Jan 2014
|
[ 21:36 rm ]
- update to 1.5.2
|
|
Sun, 10 Nov 2013
|
[ 18:56 rm ]
Cleanup:
- staging
- autoplist
|
|
Mon, 23 Sep 2013
|
[ 12:52 rm ] (Only the first 10 of 380 ports in this commit are shown above. )
Tidy up zope/plone ports over the tree. Common changes:
- remove indefinite article from COMMENT
- align USE_PYDISTUTILS value in Makefile
- tab -> space change in pkg-descr:WWW
- update WWW to use https scheme in url to avoid redirect
- add trailing slash to WWW
All changes are non-functional.
|
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
[ 08:41 rm ]
- fix packing list with python3
|
|
Sat, 7 Sep 2013
|
[ 10:00 rm ]
- update to 1.4.1
- update project url to avoid redirect
PR: 181810
Submitted by: Kozlov Sergey <kozlov.sergey.404@gmail.com>
|
|
Wed, 17 Apr 2013
|
[ 06:44 rm ]
- pass maintainership to zope@
- trim Makefile header, while here
Approved by: clsung (maintainer, via linkedin)
Feature safe: yes
|
|
Thu, 31 Jan 2013
|
[ 13:40 rm ]
- update to 1.2.0 (that's required for our current devel/py-dateutil version)
- trim Makefile header
- tab -> space change in pkg-descr:WWW
Approved by: maintainer (implicit; email with no response)
|
|
Wed, 14 Dec 2011
|
[ 10:13 clsung ]
- update to 1.1.0
- add LICENSE (MIT)
- change USE_PYTHON to just YES, because it will work with any supported python
versions
- move pkg-plist to PLIST_FILES
PR: ports/163014
Submitted by: rm
|
|
Tue, 15 Nov 2011
|
[ 06:33 clsung ]
Six is a Python 2 and 3 compatibility library. It provides utility
functions for smoothing over the differences between the Python versions
with the goal of writing Python code that is compatible on both Python
versions. See the documentation for more information on what is provided.
WWW: http://pypi.python.org/pypi/six
Noted by: rm
Feature safe: yes
|
Number of commits found: 32 |
As an Amazon Associate I earn from qualifying purchases.