| non port: devel/py-streamparse/Makefile |
|
SVNWeb
|
Number of commits found: 18 |
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3)  ]    77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 19 Jan 2022
|
[ 18:48 Vinícius Zavam (egypcio) ] f751f0b
devel/py-streamparse: update 4.0.0 to 4.1.2
kept Fabric's dependency as is;
- upstream's code makes proper use of its included libraries;
Fabric39 only hits python3.9+ compatibilities;
- plus: ports for this particular application does not exist yet.
* https://github.com/Parsely/streamparse/search?q=fabric
* https://github.com/Parsely/streamparse/compare/v4.0.0...v4.1.2
|
|
Mon, 4 Oct 2021
|
[ 10:04 Vinícius Zavam (egypcio) ] e959ca7
devel/py-streamparse: update 3.16.0 to 4.0.0
- github.com/Parsely/streamparse/releases/tag/v4.0.0
Reported by: ygy@
PR: 257428
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 12 Jan 2021
|
[ 21:25 rene ]  
Simplify some ports using PYTHON_MAJOR_VER and Python 3.6+
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ] (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Wed, 24 Apr 2019
|
[ 08:00 egypcio ]
devel/py-streamparse: update 3.15.1 to 3.16.0
Approved by: rene (mentor)
Differential Revision: https://reviews.freebsd.org/D19937
|
|
Thu, 31 Jan 2019
|
[ 10:43 egypcio ]
devel/py-streamparse: update 3.15.0 to 3.15.1
Approved by: rene (mentor)
Differential Revision: https://reviews.freebsd.org/D19031
|
|
Tue, 29 Jan 2019
|
[ 13:22 egypcio ]
devel/py-streamparse: update 3.14.0 to 3.15.0
- adopt port;
- contextlib2 added as dependency (based on what setup.py sets);
- texttable replaces prettytable (removed since 3.14.0 [348208b, #413]);
- sort RUN_DEPENDS;
- remove post-patch stage (it was removing test init script);
- add TEST_DEPENDS;
- check PYTHON_MAJOR_VER before adding extra dependencies (setup.py).
Approved by: araujo (mentor)
Differential Revision: https://reviews.freebsd.org/D18638
|
|
Thu, 18 Oct 2018
|
[ 18:57 swills ]
devel/py-streamparse: Update to 3.14.0
PR: 232368
Submitted by: Nathan <ndowens@yahoo.com>
|
|
Tue, 2 Oct 2018
|
[ 19:06 feld ] (Only the first 10 of 44 ports in this commit are shown above. )
Reset maintainer on my python ports
|
|
Wed, 20 Jun 2018
|
[ 17:05 mat ] (Only the first 10 of 1617 ports in this commit are shown above. )
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 8 Jun 2017
|
[ 23:53 feld ]
devel/py-streamparse: Update to 3.5.0
Changelog: https://github.com/Parsely/streamparse/releases/tag/v3.5.0
|
|
Thu, 3 Nov 2016
|
[ 00:42 feld ]
devel/py-streamparse: Fix dependencies
- Add NO_ARCH
|
|
Wed, 2 Nov 2016
|
[ 23:47 feld ]
Streamparse lets you run Python code against real-time streams of data
via Apache Storm. With streamparse you can create Storm bolts and spouts
in Python without having to write a single line of Java. It also
provides handy CLI utilities for managing Storm clusters and projects.
WWW: https://github.com/Parsely/streamparse
|
Number of commits found: 18 |
As an Amazon Associate I earn from qualifying purchases.