11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

16:52 tcberner 

multimedia/*phonon*: update and flavorize with @qt4/@qt5

Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D14632

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

23:16 sunpoet 

Use DISTVERSIONPREFIX instead of DISTNAME

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

16:04 mva 

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

15:19 wg 

devel/pyside: update to 1.2.2

- Support stage
- Change maintainership to python@

 

12:06 bapt 

Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)

With hat:	portmgr

 

14:31 makc 

- Bump PORTREVISION after KDE4_PREFIX change

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

14:11 nivit 

- Change (temporarily) MASTER_SITES, because dist files
  of v. 1.1.1 are no longer available  [1]
- Use new syntax in LIB_DEPENDS

Reported by:	Kostas Koukopoulos and Qi Zhao Mao Lu Qu Xiang Ge Li La  (via
private email)  [1]

 

17:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

14:10 nivit 

- Re-enable color output during the building phase

Suggested by:	makc

 

21:13 nivit 

- Update to 1.1.1
- Add devel/generatorrunner to LIB_DEPENDS  [1]
- Set MANUAL_PACKAGE_BUILD, because PySide
  requires x11-toolkits/qt4-gui with QGTKSTYLE
- Disable color output of cmake
- Set USE_PYTHON to -2.7
- Add a post-fetch target, checking that QT4_OPTIONS
  has the value QGTKSTYLE

Pointed out by:	pointhat (via beat)  [1]

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

10:04 miwi 

- Correct the QT versions number

Reported by:    phw

17:36 nivit 

- Update to 1.1.0
- Remove nivi.interfree.it from MASTER_SITES

22:03 nivit 

PySide is Python library to create cross-platform graphical user interfaces
by providing access to the underlying Qt framework. PySide and its complete
generation toolchain is available under LGPL license. This allows developers
to create Qt and Qt Quick applications in Python programming language at no
cost.

WWW:    http://pyside.org/