| non port: devel/qgit/Makefile |
|
SVNWeb
|
Number of commits found: 27 |
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias)  ]    ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above.  )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 2 Sep 2021
|
[ 15:19 Bernhard Froehlich (decke) ] 565142d
devel/qgit: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 19 Nov 2019
|
[ 09:22 adridg ]  
Update devel/qgit to latest upstream release.
Release notes https://github.com/tibirna/qgit/releases/tag/qgit-2.9
QGit version 2.9 brings a large number of improvements from
many contributors: better branch display in context menus,
better general display, drag&drop of revisions, better
navigation, opening of files from command line, slightly
better documentation etc.
|
|
Wed, 6 Nov 2019
|
[ 12:48 antoine ] (Only the first 10 of 268 ports in this commit are shown above. )
Mark a few ports BROKEN, unfetchable
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Mon, 4 Feb 2019
|
[ 11:47 linimon ]
This port needs a C++11-compatible compiler to build. Add
USES=compiler:c++11-lang to fix build on GCC-based architectures.
PR: 235344
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Fri, 25 May 2018
|
[ 11:51 adridg ]
Update devel/qgit to latest upstream 2.8
https://github.com/tibirna/qgit/releases/tag/qgit-2.8
Version 2.8 releases fixes for a set of issues that were
reported and/or solved by QGit contributors in the last year.
Most notably, the file browsing was fixed. A set of issues
with compilation on Windows was also addressed. Breakage of
keybindings and menu item accelerators was also sorted out.
The new patch in files/ is there because the release forgot to update
the version number (reported upstream).
Reported by: portsmon
|
|
Wed, 13 Sep 2017
|
[ 13:41 adridg ]
Update qgit to 2.7, switch to Qt5, take maintainership.
Approved by: tcberner (mentor)
Reviewed by: mat
Differential Revision: https://reviews.freebsd.org/D12296
|
|
Thu, 2 Mar 2017
|
[ 18:12 tcberner ]
Fix devel/qgit with newer git versions
repo-config is no longer supported by any upstream-supported
git version. Instead, use git config (which is implicitly
git config --file, corresponding to the earlier config-in-repo).
PR: 196745
Submitted by: Adriaan de Groot <groot@kde.org>, swills
Reported by: swills, groot@kde.org
Reviewed by: tcberner, rakuco
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D9861
|
|
Mon, 27 Feb 2017
|
[ 21:20 rene ] (Only the first 10 of 19 ports in this commit are shown above. )
Reset ports of itetcu@ after taking in his commit bit for safekeeping.
With hat: portmgr-secretary
|
|
Tue, 29 Jul 2014
|
[ 18:41 adamw ] (Only the first 10 of 426 ports in this commit are shown above. )
Convert a bunch of USE_BZIP2 to USES=tar:bzip2
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Fri, 22 Nov 2013
|
[ 18:48 makc ] (Only the first 10 of 14 ports in this commit are shown above. )
- Convert to USES=qmake (and other USES while I'm here)
- Add state support
- Convert LIB_DEPENDS to new style, adjust USE_QT4 components, etc.
Approved by: portmgr (blanket approval)
|
|
Fri, 20 Sep 2013
|
[ 17:17 bapt ] (Only the first 10 of 623 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Sat, 22 May 2010
|
[ 19:22 itetcu ]
Update to 2.3. This is mainly a manteinance release with added a new and better
graph look. Full checges at: http://git.kernel.org/?p=qgit/qgit4.git;a=shortlog
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Sun, 22 Nov 2009
|
[ 19:49 pav ] (Only the first 10 of 86 ports in this commit are shown above. )
- Mark MAKE_JOBS_UNSAFE
Reported by: pointyhat
|
|
Sat, 22 Aug 2009
|
[ 00:18 amdmi3 ] (Only the first 10 of 417 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with D
|
|
Mon, 27 Apr 2009
|
[ 06:23 itetcu ]
- depend on moc qmake rcc uic only for build [1]
- install the program stripped
- bump PORTREVISION
Submitted by: mack@ [1]
|
|
Sat, 25 Apr 2009
|
[ 22:10 itetcu ]
QGit is a git GUI viewer built on Qt/C++.
With qgit you will be able to browse revisions history, view patch content and
changed files, graphically following different development branches.
Features :
- View revisions, diffs, files history, files annotation, archive tree.
- Commit changes visually cherry picking modified files.
- Apply or format patch series from selected commits, drag and drop commits
between two instances of qgit.
- Associate commands sequences, scripts and anything else executable to a
custom action. Actions can be run from menu and corresponding output is grabbed
by a terminal window. qgit implements a GUI for the most common StGIT commands
like push/pop and apply/format patches. You can also create new patches or
refresh current top one using the same semantics of git commit,
i.e. cherry picking single modified files.
WWW: https://sourceforge.net/projects/qgit
|
Number of commits found: 27 |
As an Amazon Associate I earn from qualifying purchases.