13:02 Po-Chuan Hsieh (sunpoet) 

devel/rubygem-highline: Update to 2.1.0

Changes:	https://github.com/JEG2/highline/blob/master/Changelog.md

    57877fe

23:08 Muhammad Moinur Rahman (bofh) 

Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

    18c6e18

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

19:43 sunpoet 

Update to 2.0.3

- Fix LICENSE_FILE

Changes:	https://github.com/JEG2/highline/blob/master/Changelog.md

 

19:53 sunpoet 

Update to 1.7.10

Changes:	https://github.com/JEG2/highline/blob/1-7-stable/Changelog.md

 

21:57 swills 

Convert USES=gem:autoplist to USES=gem since autoplist is default

 

16:36 swills 

create USES=gem and update rubygem- ports to use it

Note that for now ports still have to have USE_RUBY=yes to use USES=gem

PR:		209041
Differential Revision:	https://reviews.freebsd.org/D6070

 

23:11 sunpoet 

- Update to 1.7.8

Changes:	https://github.com/JEG2/highline/blob/1-7-stable/Changelog.md

 

20:14 sunpoet 

- Update to 1.7.7
- Fix LICENSE

Changes:	https://github.com/JEG2/highline/blob/1-7-stable/Changelog.md

 

05:17 sunpoet 

- Update to 1.7.6

Changes:	https://github.com/JEG2/highline/blob/1-7-stable/Changelog.md

 

17:14 sunpoet 

- Update to 1.7.5

Changes:	https://github.com/JEG2/highline/blob/1-7-stable/Changelog.md

 

17:36 sunpoet 

- Update to 1.7.3

Changes:	https://github.com/JEG2/highline/blob/master/Changelog.md

 

16:01 pgollucci 

Set NO_ARCH for remaining rubygem-* ports with no arch dependent files

Obtained from:  DEVELOPER_MODE
With Hat:       ruby@

Sponsored by:   RideCharge Inc / Curb

 

20:17 sunpoet 

- Update to 1.7.2
- Update WWW

Changes:	https://github.com/JEG2/highline/blob/master/Changelog.md

 

01:42 swills 

- Update to 1.6.21

PR:		ports/187427
Submitted by:	Michael Moll <kvedulv@kvedulv.de>

 

23:00 sunpoet 

- Update to 1.6.20
- Add LICENSE

Changes:	https://github.com/JEG2/highline/blob/master/CHANGELOG

 

02:36 swills 

- Add stage support

 

17:17 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

 

03:29 swills 

- Update to 1.6.19

 

00:35 jgh 

- update security/rubygem-net-ssh to 2.2.2,2 [1]
- update devel/rubygem-mixlib-authentication to 1.3.0 [2]
- update devel/rubygem-highline to 1.6.15 [3]
- update sysutils/rubygem-chef to 10.16.4 [4]

PR:		171010 [1]
PR:		173646 [2]
PR:		173647 [3]
PR:		171005 [4]
Submitted by: nickdewing@gmail.com [1,4]
Submitted by: maintainer, renchap@cocoa-x.com [2,4], renchap@cocoa-x.com [3]

 

19:27 swills 

- Update to 1.6.2

23:09 pgollucci 

- Update to 1.6.1
- Remove MD5

PR:             ports/153168
Submitted by:   Hsin-Han You <hhyou@cs.nctu.edu.tw>
With Hat:       ruby@
Sponsored by:   RideCharge Inc. / TaxiMagic

19:51 pgollucci 

- Mass conversion of RF -> RG for MASTER_SITE for rubygem- ports
  [RG aka rubygems.org]

PR:             ports/147005
Submitted by:   pgollucci (myself)
Approved by:    portmgr (pav)
With Hat:       ruby@

22:55 pgollucci 

- Re-assign all my rubygem-* ports to ruby@
  this gives us more eyes and brings us inline with perl@

  Current ruby@ members (stas, dinoex, pgollucci)
  http://wiki.freebsd.org/Ruby

Discussed with: stas on #bsdports

00:32 pgollucci 

- Update to 1.5.2

23:44 pgollucci 

- Upate to 1.5.1

00:11 pgollucci 

- convert to RUBYGEM_AUTOPLIST
  remove x-generate-plist and friends
- use RF macro and remove SUBDIR where possible
- remove some uneeded GEM_NAME=${DISTNAME}
  (this c/should be handled better in bsd.*.mk)

other deltas specific to individual ports:
  audio/rubygem-mp3info     - unbreak, fix packaging, bump PORTREVISION
  devel/rubygem-rapt        - adopt
  devel/rubygem-rspec       - remove BUILD_DEPENDS=RUN_DEPENDS -- neither set
  devel/rubygem-ruby2ruby   - add #' for vim highlight
  graphics/rubygem-extifr   - drop PORTREVISION=0
  graphics/rubygem-gd2      - add #' for vim highlight
  www/rubygem-rubyfulsoup   - swap GEM_NAME / DISTNAME for constistency

Sponsored by:   RideCharge Inc.
Tested on:      RideCharge's Tinderbox
Reviewed by:    stas

02:16 stas 

- Fix plist after ruby update by generating it dynamically.

00:05 wxs 

Update to 1.5.0

PR:             ports/128657
Approved by:    maintainer timeout

02:43 pgollucci 

Update my ports to my freebsd address

Approved by:    araujo (mentor)

08:58 stas 

- Add ruby 1.9 support
- Implement new knobs for gems and rake (these are included in
  ruby 1.9 distribution already). Also move gem bits from
  ruby-gems/Makefile.common to bsd.ruby.mk[1]. Now to depend
  on gems or rake you should define USE_RUBYGEMS/USE_RAKE
  accordingly. Also RAKE_BIN variable is provided for
  pointing to the right rake executable.
- Rewrite RUBY_SCHEBANG in awk to eliminate build dependency
  on ruby.

Discussed with: Jonathan Weiss <jw@innerewut.de> [1] (gems maintainer)
Tested by:      ports@

21:16 miwi 

A high-level IO library that provides validation, type conversion, and more
for command-line interfaces. HighLine also includes a complete menu system
that can crank out anything from simple list selection to complete shells
with just minutes of work.

WWW: http://rubyforge.org/projects/highline

PR:             ports/116919
Submitted by:   Philip M. Gollucci <pgollucci at p6m7g8.com>