non port: devel/rubygem-ruby_parser/Makefile |
SVNWeb
|
Number of commits found: 29 |
Sat, 14 Jan 2023
|
[ 23:08 Muhammad Moinur Rahman (bofh) ] 18c6e18 (Only the first 10 of 2869 ports in this commit are shown above. )
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Sun, 17 Oct 2021
|
[ 17:37 Stefan Eßer (se) ] c1e1d9d
devel/rubygem-ruby_parser: Add CPE information
Approved by: portmgr (blanket)
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 28 Nov 2020
|
[ 15:03 mfechner ]
Update to 3.15.0 which is required for gitlab-ce 13.6.
|
Sat, 13 Jan 2018
|
[ 08:13 sunpoet ]
Update to 3.10.1
Changes: https://github.com/seattlerb/ruby_parser/blob/master/History.rdoc
PR: 224692
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 14 days)
|
Wed, 9 Aug 2017
|
[ 09:03 tz ]
devel/rubygem-ruby_parser: Update from 3.6.6 to 3.8.4
Changelog: https://github.com/seattlerb/ruby_parser/blob/master/History.rdoc
Submitted by: Matthias Fechner <idefix@fechner.net>
|
Wed, 27 Apr 2016
|
[ 21:57 swills ] (Only the first 10 of 1194 ports in this commit are shown above. )
Convert USES=gem:autoplist to USES=gem since autoplist is default
|
[ 16:36 swills ] (Only the first 10 of 1196 ports in this commit are shown above. )
create USES=gem and update rubygem- ports to use it
Note that for now ports still have to have USE_RUBY=yes to use USES=gem
PR: 209041
Differential Revision: https://reviews.freebsd.org/D6070
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Tue, 16 Jun 2015
|
[ 00:02 amdmi3 ]
- Update to 3.6.6
- Add NO_ARCH
- Fix shebangs
PR: 200386
Submitted by: horia@racoviceanu.com
Approved by: maitainer timeout (voldern@hoeggen.net, 3 weeks)
|
Tue, 10 Jun 2014
|
[ 07:39 olgeni ] (Only the first 10 of 388 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.
CR: D196
Approved by: portmgr (bapt)
|
Fri, 24 Jan 2014
|
[ 14:49 miwi ] (Only the first 10 of 22 ports in this commit are shown above. )
- Stage Safe
|
Fri, 20 Sep 2013
|
[ 17:17 bapt ] (Only the first 10 of 623 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)
|
Fri, 19 Jul 2013
|
[ 17:22 swills ]
- Update to 3.2.2
PR: ports/180532
Approved by: maintianer timeout (voldern@hoeggen.net, >2 weeks)
|
Sat, 13 Jul 2013
|
[ 06:59 swills ]
- Update to 3.1.3
PR: ports/180105
Approved by: maintainer timeout (voldern@hoeggen.net, >2 weeks)
|
Sun, 24 Feb 2013
|
[ 17:40 swills ]
- Update to 3.1.1
- Add patch for security issue
Obtained from: http://seclists.org/oss-sec/2013/q1/393
Security: forthcoming
|
Tue, 22 Jan 2013
|
[ 02:43 swills ]
- Update to 3.0.4
- Convert to new Makefile header
- Add LICENSE
- Remove Author: line from pkg-descr
PR: ports/174691
Submitted by: tota
Approved by: maintainer timeout (voldern@hoeggen.net, >3 weeks)
|
Tue, 24 Jul 2012
|
[ 19:52 swills ]
- Remove unnecessary dependencies
PR: ports/169132
Approved by: maintainer timeout (voldern@hoeggen.net, >1 month)
|
Sun, 30 Oct 2011
|
[ 23:57 swills ]
- Update to 2.3.1
PR: ports/162126
Submitted by: swills (me)
Approved by: voldern@hoeggen.net (maintainer)
|
Thu, 23 Jun 2011
|
[ 19:34 pgollucci ] (Only the first 10 of 18 ports in this commit are shown above. )
- guess thats enough for the 1st day back
- add files supposed to have been in previous commit for rails update to 3.0.9
|
Tue, 5 Oct 2010
|
[ 09:09 pgollucci ]
- RF -> RG conversions
With Hat: ruby@
|
[ 08:29 pgollucci ]
- Fix dependency versions
PR: ports/150836
Submitted by: myself (pgollucci)
Approved by: maintainer timeout (voldern@hoeggen.net ; 14 days)
Sponsored by: RideCharge Inc. / TaxiMagic
|
Thu, 23 Sep 2010
|
[ 02:17 pgollucci ]
- Update to 2.0.5
PR: ports/150408
Submitted by: myself (pgollucci)
Approved by: maintainer timeout (voldern@hoeggen.net ; 14 days)
Sponsored by: RideCharge Inc. / TaxiMagic
|
Sun, 6 Jun 2010
|
[ 19:25 pgollucci ] (Only the first 10 of 73 ports in this commit are shown above. )
- GEMS are always RUN_DEPENDS of other GEMS
- Bump PORTREVISION when something other then BUILD_DEPENDS changes
- Some minor verticle whitespace in some ports for consistency with the rest
PR: ports/147551
Submitted by: pgollucci@ (myself)
Reviewed by: portmgr (pav)
With Hat: ruby
|
Thu, 10 Sep 2009
|
[ 17:54 pgollucci ]
- Update to 2.0.4
|
Wed, 22 Jul 2009
|
[ 17:26 pgollucci ]
- Update to 2.0.3
PR: ports/136739
Approved by: maintainer
Submitted by: myself (pgollucci@)
|
Fri, 19 Jun 2009
|
[ 09:24 pav ]
ruby_parser (RP) is a ruby parser written in pure ruby (utilizing
racc--which does by default use a C extension). RP's output is
the same as ParseTree's output: s-expressions using ruby's arrays and
base types.
Author: Ryan Davis (zenspider) <ryand-ruby@zenspider.com>
WWW: http://rubyforge.org/projects/parsetree/
PR: ports/135706
Submitted by: Espen Volden <voldern@hoeggen.net>
|
Number of commits found: 29 |