| non port: devel/rubygem-trollop/Makefile |
|
SVNWeb
|
Number of commits found: 26 |
|
Sat, 14 Jan 2023
|
[ 23:08 Muhammad Moinur Rahman (bofh)  ]    18c6e18 (Only the first 10 of 2869 ports in this commit are shown above.  )
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 8 Dec 2019
|
[ 17:29 sunpoet ]  
Update to 2.9.10
Changes: https://github.com/ManageIQ/optimist/blob/v2.9.10/History.txt
|
|
Thu, 20 Sep 2018
|
[ 00:22 sunpoet ]
Update to 2.9.9
Changes: https://github.com/ManageIQ/optimist/blob/v2.9.9/History.txt
|
|
Sun, 29 Jul 2018
|
[ 19:21 sunpoet ]
Update to 2.1.3
Changes: https://github.com/ManageIQ/trollop/blob/master/History.txt
|
|
Wed, 27 Apr 2016
|
[ 21:57 swills ] (Only the first 10 of 1194 ports in this commit are shown above. )
Convert USES=gem:autoplist to USES=gem since autoplist is default
|
[ 16:36 swills ] (Only the first 10 of 1196 ports in this commit are shown above. )
create USES=gem and update rubygem- ports to use it
Note that for now ports still have to have USE_RUBY=yes to use USES=gem
PR: 209041
Differential Revision: https://reviews.freebsd.org/D6070
|
|
Sat, 4 Jul 2015
|
[ 16:17 sunpoet ]
- Update to 2.1.2
Changes: https://github.com/ManageIQ/trollop/blob/master/History.txt
|
|
Sat, 13 Jun 2015
|
[ 13:51 sunpoet ]
- Add LICENSE
- Add NO_ARCH
- Remove USE_RAKE
- Reformat pkg-descr
- Update WWW
- Take maintainership
|
|
Fri, 12 Jun 2015
|
[ 20:58 erwin ] (Only the first 10 of 57 ports in this commit are shown above. )
Reset dhn's ports
PR: 197522
Submitted by: jbeich
Approved by: portmgr
|
|
Tue, 10 Jun 2014
|
[ 07:39 olgeni ] (Only the first 10 of 388 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories D-F.
CR: D196
Approved by: portmgr (bapt)
|
|
Fri, 24 Jan 2014
|
[ 14:49 miwi ] (Only the first 10 of 22 ports in this commit are shown above. )
- Stage Safe
|
|
Fri, 20 Sep 2013
|
[ 17:17 bapt ] (Only the first 10 of 623 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)
|
|
Sat, 9 Jul 2011
|
[ 09:45 dhn ]
- Update to 1.16.2
PR: ports/158746
Submitted by: Loic Pefferkorn <loic-freebsd@loicp.eu>
|
|
Wed, 11 Aug 2010
|
[ 09:20 dhn ]
- Update to 1.16
|
|
Wed, 23 Jun 2010
|
[ 18:42 pgollucci ] (Only the first 10 of 35 ports in this commit are shown above. )
RF -> RG Conversion (Part II)
PR: ports/147844
Submitted by: pgollucci (myself)
Reviewed by: portmgr (flz)
Discussed with: portmgr (pav)
Tested by: make checksum
Feature safe: yes
|
|
Fri, 2 Oct 2009
|
[ 17:17 dhn ]
- Update to 1.15
|
|
Sun, 21 Jun 2009
|
[ 11:47 dhn ]
- Update to 1.14
|
|
Thu, 9 Apr 2009
|
[ 00:11 pgollucci ] (Only the first 10 of 144 ports in this commit are shown above. )
- convert to RUBYGEM_AUTOPLIST
remove x-generate-plist and friends
- use RF macro and remove SUBDIR where possible
- remove some uneeded GEM_NAME=${DISTNAME}
(this c/should be handled better in bsd.*.mk)
other deltas specific to individual ports:
audio/rubygem-mp3info - unbreak, fix packaging, bump PORTREVISION
devel/rubygem-rapt - adopt
devel/rubygem-rspec - remove BUILD_DEPENDS=RUN_DEPENDS -- neither set
devel/rubygem-ruby2ruby - add #' for vim highlight
graphics/rubygem-extifr - drop PORTREVISION=0
graphics/rubygem-gd2 - add #' for vim highlight
www/rubygem-rubyfulsoup - swap GEM_NAME / DISTNAME for constistency
Sponsored by: RideCharge Inc.
Tested on: RideCharge's Tinderbox
Reviewed by: stas
|
|
Wed, 18 Mar 2009
|
[ 21:04 dhn ]
- Update to 1.13
Approved by: miwi (mentor)
|
|
Fri, 6 Mar 2009
|
[ 18:14 dhn ] (Only the first 10 of 64 ports in this commit are shown above. )
- Use my FreeBSD address on the ports I maintain
Approved by: tabthorpe (co-mentor)
|
|
Mon, 9 Feb 2009
|
[ 21:07 miwi ]
- Update to 1.12
PR: 131539
Submitted by: Dennis Herrmann <adox@mcx2.org> (maintainer)
|
|
Sun, 8 Feb 2009
|
[ 21:39 miwi ]
- Update to 1.11
PR: 131159
Submitted by: Dennis Herrmann <adox@mcx2.org> (maintainer)
|
|
Thu, 8 Jan 2009
|
[ 17:52 miwi ]
Trollop is a commandline option parser for Ruby that gets out of your way.
One line of code per option is all you need to write. For that, you get a
nice automatically-generated help page (fit to your screen size!), robust
option parsing, command subcompletion, and sensible defaults for everything
you don't specify.
WWW: http://trollop.rubyforge.org/
PR: ports/130240
Submitted by: Dennis Herrmann <adox at mcx2.org>
|
Number of commits found: 26 |
As an Amazon Associate I earn from qualifying purchases.