Port details |
- xcscope.el Emacs minor mode for using cscope
- 1.5_6 devel =0 1.5_6Version of this port present on the latest quarterly branch.
- Maintainer: jhb@FreeBSD.org
- Port Added: 2020-11-13 00:10:21
- Last Update: 2024-03-26 22:51:47
- Commit Hash: 26421ac3
- License: GPLv2+
- WWW:
- https://github.com/dkogan/xcscope.el
- Description:
- xcscope is a wrapper around cscope that can be used to navigate source
files in GNU Emacs.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- xcscope.el>0:devel/xcscope.el
- To install the port:
- cd /usr/ports/devel/xcscope.el/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/xcscope.el
- pkg install xcscope.el
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: xcscope.el
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1605054294
SHA256 (dkogan-xcscope.el-v1.5_GH0.tar.gz) = 463c100e6291a698d262962ac69b1de53d58cb5bc67bab73d958eda926a6803d
SIZE (dkogan-xcscope.el-v1.5_GH0.tar.gz) = 30161
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Runtime dependencies:
-
- cscope : devel/cscope
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- devel_xcscope.el
- USES:
- emacs
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
1.5_6 26 Mar 2024 22:51:47 |
Joseph Mingrone (jrm) |
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492 |
1.5_5 27 Jan 2024 22:33:05 |
Joseph Mingrone (jrm) |
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615 |
1.5_4 20 Aug 2023 00:53:11 |
Yasuhiro Kimura (yasu) |
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared (Only the first 15 lines of the commit message are shown above ) |
1.5_3 30 Nov 2022 07:06:37 |
Yasuhiro Kimura (yasu) |
editors/emacs-devel: Update to 2022-11-28 snapshot
Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.
Changes: https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f |
1.5_2 21 Sep 2022 07:48:19 |
Yasuhiro Kimura (yasu) |
editors/emacs: Update to 28.2
* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.
ChangeLog: https://www.gnu.org/software/emacs/news/NEWS.28.2
PR: 266454
Exp-run by: antoine
Reviewed by: ashish, jrm
Differential Revision: https://reviews.freebsd.org/D36613 |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.5_1 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
1.5_1 07 Apr 2021 08:09:01 |
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
1.5_1 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.5_1 26 Mar 2021 00:40:45 |
jrm |
editors/emacs: Update to 27.2
This is a bug-fix release with no new features.
https://www.gnu.org/software/emacs/news/NEWS.27.2
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D27700 |
1.5 13 Nov 2020 00:09:37 |
jhb |
Switch xcscope.el to a separately-maintained version.
The version of xcscope.el bundled with cscope does not work with emacs
27 as it uses a deprecated function. Switch to using a newer fork of
xcscope.el which works with emacs 27 and includes several other fixes
such as working over tramp-mode. Since the newer fork is hosted
independently, add it as a new port which depends on cscope.
PR: 251029
Reviewed by: maintainer (devel/cscope)
Approved by: swills
Differential Revision: https://reviews.freebsd.org/D27172 |